Srhythm SoulMate S2 Series User manual

True Wireless Stereo Earbuds
Srhythm Soulmate Series (S2)
User Manual
Manuale d'Uso
Manual de Usuario
Manuel d'utilisation
Bedienungsanleitung
ユーザーマニュアル

What's in the Box:
Pay Attention to Battery
S2 is powered by a built-in rechargeable lithium battery.Please charge S2 above 8
hours before using it for your first time.
1. Only the attached Type-C cable can be used for charging battery.Incorrect charging
may damage batteries and earbuds.
2. Do not attempt to open rechargeable batteries or battery packs that may broken
products because of the precise structure.There are also no usable parts in it.
3. Rechargeable batteries only can be recharged by adults.Keep the battery out of
reach of children.If children swallowed it,please take them to the hospital immediately.
4. Keep the battery away from the fire.Do not throw the battery into the fire,otherwise
it may explode.Batteries may also explode if being damaged.Please handle and dispos-
al it according to your local conditions and regulations.
You could replace silicon ear tips to be the best suitable size for your ears.(S/M/L size
for your choice)
Fit earbuds into your ears.
Product Dimensions:
Earbuds
Charging Box
46mm
51mm
32mm
70mm
80mm
English
1

Parameters:
True Wireless Stereo Earbuds S2,Hi-Fi sound quality and dual-mode Bluetooth
Load impedance
Frequency range
Battery Life (Charging Box)
Water proof level
Bluetooth version
Sensitivity
Charging Time(Charging Earbuds)
Charging Time(Charging Box)
Battery Capacity
Operating voltage
Weight
32Ω
2.402G-2.480G
500 times
IPX5
V5.0
- 94 dBm
1-1.5 Hours(Mobile Charging)
1-1.5 Hours(Wired Charging)
Earbuds 45mAh Charging Box 450mAh
DC5V
10g for Single Earbud 64g for Charging Box
Open the charging box cover for the first time,and it is avail-
able to enter Bluetooth pairing mode after full of
charging.The LED indicators on earbuds will flash blue light 3
times and you will hear a voice prompt of “Power On” from
the earbuds.
Start Pairing:
Open the "Bluetooth" function on your phone,search for "S2"
and click it to connect.The LED indicators on earbuds will
flash blue once for every 3 seconds,and you will hear a voice
prompt of “connected” from the earbuds that means your
Bluetooth pairing is successful.(While earbuds pairing,the
LED indicator on one earbud flashes red and blue alternate-
ly,while the other one earbud flashes blue slowly,and there is
a voice prompt of “pairing” from earbuds,which indicates
that earbuds are ready for connecting to a mobile device.)
Automatic Pairing:
Normally your earbuds will automatically pairing with your
mobile next time once ever paired successfully.Sometimes
perhaps still need you to click the Bluetooth pairing name S2
on your mobile.
*After taking out earbuds from the charging box,if it is not
used about three minutes,earbuds will automatically shut
down to save power.Touch and hold the touchpad for 2-3
seconds to turn earbuds on.
*If connect with other devices,please firstly disconnect or
cancel the pairing in the Bluetooth control panel on your
phone,your S2 will enter standby state after disconnecting.
* Above data are all from the laboratory and for reference only.
Enter Pairing Mode:
English
2
Before Pairing:
Tear off protective film and
throw them away. If low bat-
tery, please charge.
Protective film

Charging to the Charging Box:
Connect the attached USB type-c cable to the USB interface of the charging device to
charge the charging box under voltage 5V.It takes about 1-1.5 hours to fully charge
earbuds and charging box.
Indicator light status of charging box:
The leftmost LED indicator(represents Left Earbud) and the rightmost LED indica-
tor(represents Right Earbud) on the charging box flash green when charging.These
two LED indicator lights will be off after full charge of earbuds.
*If the charging box is opened,earbuds will stop being charged.
*Voltage exceed 5V and under 28V will start charging protect mode.and the power
can not be charged.
*Voltage exceed 28V may broke products.
Mobile charging:
Put earbuds into the charging box,and pay attention to the left and right sides.The
magnetic suction of the charging box will adjust earbuds to the right position.It takes
about 1-1.5 hours for earbuds to be fully charged on the left/right.Please kindly
remember to wipe and dry charging connection parts of earbuds before mobile
charging.
English
3

Multi-function Touchpad:
Accept/End：Tap the Touchpad of either earbud once.
Volume Up:Touch and hold the Touchpad of the Right(R)
Earbud about 2 seconds
Volume:
Music:
Call:
Activate Voice Assistant
Switch between two calls:Tap the Touchpad of either earbud twice
Call back the last call you dialed out:Tap the Touchpad of the
Right(R) Earbud 3 times
Tap the Touchpad of the Left(L) Earbud for 3 times quickly to wake
up the voice assistant
Continue & Decline:Touch and hold the Touchpad of either earbud
for 2 seconds
Hold & Accept:Tap the Touchpad of either earbud twice
End & Accept:Tap the Touchpad of either earbud once
Play/Pause:Tap the Touchpad of either earbud once
Next：Tap the Touchpad of the Right(R) Earbud twice
Previous：Tap the Touchpad of the Left(L) Earbud twice
Decline:Touch and hold the Touchpad of either earbud for 2 seconds
English
4
Volume Down:Touch and hold the Touchpad of the Left(L)
Earbud about 2 seconds