ssontong A9 User manual

ssontong
MODE:A9
ANY PROBLEMS, please contact us!
We will do our best to help you
If you just bought front camera,pls ignore some part
Thanks!
1080P High Speed Driving Recorder
USER MANUAL

1
Before use the car camera you should
know
1.Find a 32GB,class 10 micro SD card (If you bought dual
dash cam, the SD card is included).
2.Charge dash cam 2 ~ 3 hours.
3.The dash camera for car is equipped with a small
battery for saving emergency file and setting only. The
dashcams will shut down after 5mins if there is no
external power connection. You need plug the car
charger while use the car camera recorder.
4. Please turn off motion detection AND parking mode
function and adjust G-sensor to a "low" when you are
driving.
5. Please press the OK button to stop the recording first,
then press the MENU button to access the setting.
6. The mini usb cable in package is for transferring video
to your computer, which can not been used as power
cord, please use the car charge to power this dashboard
camera.
7. If your suction cup, rear camera or other accessories
are broken or missed, please let us know, we will help

2
you asap.
8. When you playback the video on your computer, can
not see the image just can heard a sound, please
download a Universal player, that issue will be solved.
PRODUCT STRUCTURE
1. Up Button
2. Down Button
3. Setting Button (Menu Button)
4. Micro SD Card Slot
1. OK Button
2. Mode Button
3. Lock Button
1. Camera Port
(Optional)
2. Mount Connector
3. Power Port

3
1. Lens
1.Reset
2. Speaker
2.Microphone
Contents
•1. How to install this dash cam
•2. Before using the car camera
•3. How to format dash cam
•4. About settings
•5. FAQ
•6. After-sales service & Warranty

2
Front camera installation:
Connect the car charger with
camera to cigarette lighter，
then hide extra cable into
interior panel.

3
2 way of run the wire for rear
cam

4
2 way of install rear cam, inside
of car & outside of car
OUTSIDE INSIDE
Please check the installation effect of the front
camera:

5
Connect the rear cam with rear cam cable:
Picture one
Picture two
After wired the rear cam cable, then connect rear
cam with rear cam cable; Please note up “Picture
one” and “Picture two”

6
2 situation you may meet
Situation 1:If your car do NOT
have built in reverse system
monitor display screen,need this
dash cam reverse function,please
connect rear cam cable red wire
to car reversing lamp positive
terminal.When you reverse
car,the display screen will switch
to full screen of rear view.

7
Situation 1

8
Situation 2
Situation 2: If your car already have reverse
system display monitor,just need this dash cam
record rear view when you are driving,please
ignore the rear cam cable red wire,it no need
connect to anywhere.When you drive forward or
reverse car,the dash cam display screen will always
show picture in picture of both front and rear view.
Please note below picture:

9
Fix the rear cam on licence plate

10
4 Dual Dash Cam Screen Display
Mode(When in standby mode, press"UP" button
switch between this 4 screen display mode),
please note below picture:
Display Mode 1 Display Mode 2
Display Mode 3 Display Mode 4

11
Video storage fold:
DCIMA: front camera video
DCIMB: rear camera video
LOCA: front camera locked video
MOVA: front camera normal video
LOCB: rear camera locked video
MOVB:rear camera normal video
Note: When you playback the videos on your
pc, just heard a sound, cannot see the images,but can
playback video on camera,Please download a universal
player like “KMPlayer” or “VLC media player”.
How to format micro SD card on dash cam?

12
2. Click menu button again to enter settings page
3. Click OK button to format card.
1. Click OK button to stop
recording first, then click
menu button enter menu page

13
About settings
1.How to enter setting/menu page
with card inserted:
1. click OK button to stop recording
2. Click menu button to enter menu page
without card inserted:
1.click menu button
directly

14
1. How to view playback video? (on dash cam)
1. Press ok button to stop recording
2. Press mode button twice into playback mode

15
3. MOVA is front camera video
4. MOVB is rear cam video
5.LOCB is rear cam locked video

16
View playback on laptop in 2 methods:
Method 1: Use card reader to view playback
video on laptop.
Step 1: Insert card into card reader
Step 2: Connect card reader with laptop

17
Method 2: Connect dash cam with laptop
directly with package included mini USB data
cable
1. Use the mini usb cable
connect the dash can into
your PC