Stackrack SR10B User manual

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct. 07, 2016
MIL-STD Rugged Computer
SR10B User’s Manual
SR10B
MIL-STD Rugged Computer
User’s Manual

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
Safety information
Electrical safety
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before
relocating the system.
When adding or removing devices to or from the system, ensure that the power cables for the
devices are unplugged before the signal cables are connected. If possible, disconnect all power cables
from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all power cables are
unplugged.
Seek professional assistance before using an adapter or extension cord. These devices could interrupt
the grounding circuit.
Make sure that your power supply is set to the correct voltage in your area.
If you are not sure about the voltage of the electrical outlet you are using, contact your local power
company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or
your local distributor.
Operation safety
Before installing the motherboard and adding devices on it, carefully read all the manuals that came
with the package.
Before using the product, make sure all cables are correctly connected and the power cables are not
damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and
circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may
become wet.
Place the product on a stable surface.
If you encounter any technical problems with the product, contact your local distributor
Statement
All rights reserved. No part of this publication may be reproduced in any form or by any means,
without prior written permission from the publisher.
All trademarks are the properties of the respective owners.
All product specifications are subject to change without prior notice
1

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
Revision History
Revision
Date (yyyy/mm/dd)
Changes
Version 1.0
2016/08/10
Initial Release
Version 1.1
2016/10/7
New vibration isolation design
Add WatchDog Function
Packing list
□SR10B MIL-STD Rugged Computer
□Vibration Isolation Base
Accessories Kit
□Terminal block 4 PIN x 1pcs
□Screw Package
□CD (Driver + User’s Manual)
If any of the above items is damaged or missing, please contact your local distributor.
Ordering information
Model Number
Description
SR10B-UT
Intel® QM87 MIL-STD Fanless Rugged System with Intel® Core i7-4700EQ
Haswell Processor, 9V to 36V DC-in. Wide Temp -40 to 70°C
With a vibration isolation base.
2

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
Table of contents
SAFETY INFORMATION ........................................................................................................................................ 1
ELECTRICAL SAFETY.....................................................................................................................................................1
OPERATION SAFETY ....................................................................................................................................................1
STATEMENT......................................................................................................................................................... 1
REVISION HISTORY .............................................................................................................................................. 2
PACKING LIST ...................................................................................................................................................... 2
ACCESSORIES KIT................................................................................................................................................. 2
ORDERING INFORMATION................................................................................................................................... 2
TABLE OF CONTENTS........................................................................................................................................... 3
CHAPTER 1: PRODUCT INTRODUCTION............................................................................................................... 5
1.1 KEY FEATURES .....................................................................................................................................................5
1.2 FRONT PANEL COMPONENTS.................................................................................................................................7
1.3 BACK PANEL COMPONENTS...................................................................................................................................7
1.4 MECHANICAL DIMENSIONS....................................................................................................................................8
CHAPTER 2: JUMPERS AND CONNECTORS LOCATIONS........................................................................................ 9
2.1 FRONT PANEL CONNECTOR PIN DEFINITIONS ...........................................................................................................9
Status Indicators ...............................................................................................................................................9
LAN1 LED STATUS ........................................................................................................................................ 9
LED2 LED STATUS......................................................................................................................................... 9
POWER/HDD LED ........................................................................................................................................ 9
USB3.0 CN19: USB*2........................................................................................................................................9
COM3: RS232 with 5V/12V select by jumper................................................................................................10
COM4: RS232 with 5V/12V select by jumper................................................................................................10
POWER BUTTON........................................................................................................................................ 10
DC IN : DC Adapter Power Input....................................................................................................................10
2.2 REAR PANEL CONNECTOR PIN DEFINITIONS ...........................................................................................................10
LAN1: Intel i217LM.........................................................................................................................................10
LAN2: Intel I210IT...........................................................................................................................................10
LAN3: Intel i210IT ...........................................................................................................................................10
LAN4: Intel I210IT...........................................................................................................................................10
COM1: RS232/422/485 with 5V/12V selectable (Default RS232)................................................................11
COM2: RS232/422/485 with 5V/12V selectable (Default RS232)................................................................11
USB3.0 CN18: USB3.0 *2 ...............................................................................................................................11
2.3 INTERNAL CONNECTOR .......................................................................................................................................12
MCARD1: Mini PCIE Card Slot<COLAY mSATA>.............................................................................................12
CHAPTER 3: INSTALLATION................................................................................................................................ 13
3.1 HDD TRAY .......................................................................................................................................................13
3.2 VIBRATION ISOLATION BASE .................................................................................................................................14
CHAPTER 4: AMI BIOS UTILITY........................................................................................................................... 15
3

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
4.1 STARTING .........................................................................................................................................................15
4.2 NAVIGATION KEYS ..............................................................................................................................................15
4.3 MAIN MENU ....................................................................................................................................................16
4.4 ADVANCED MENU .............................................................................................................................................17
4.4.1 PCI Subsystem Settings .........................................................................................................................18
PCI Express Settings .................................................................................................................................. 18
4.4.2 ACPI Settings .........................................................................................................................................20
4.4.3 CPU configuration .................................................................................................................................21
4.4.4 SATA Configuration................................................................................................................................26
Software Feature Mask Configuration ..................................................................................................... 28
4.4.5 Intel Rapid Start Technology.................................................................................................................30
4.4.6 PCH-FW Configuration..........................................................................................................................30
Firmware Update Configuration............................................................................................................... 31
4.4.7 Intel Anti-Theft Technology Configuration...........................................................................................31
4.4.8 AMT Configuration................................................................................................................................32
4.4.9 USB Configuration.................................................................................................................................34
4.4.10 IT8786 Super IO Configuration...........................................................................................................35
Serial Port 1 Configuration........................................................................................................................ 35
Serial Port 2 Configuration........................................................................................................................ 35
Serial Port 3 Configuration........................................................................................................................ 35
Serial Port 4 Configuration........................................................................................................................ 36
Serial Port 5 Configuration........................................................................................................................ 36
Serial Port 6 Configuration........................................................................................................................ 36
4.4.11 IT8786 HW Monitor............................................................................................................................37
4.4.12 Serial Port Console Redirection..........................................................................................................37
Console Redirection Setting...................................................................................................................... 37
4.4.13 Network Stack .....................................................................................................................................38
4.4.14 Intel I210-IT Gigabit Network Connection.........................................................................................39
4.5 CHIPSET ...........................................................................................................................................................40
4.5.1 PCH IO configuration.............................................................................................................................40
PCI Express Configuration......................................................................................................................... 40
USB Configuration..................................................................................................................................... 47
PCH Azalia Configuration. ......................................................................................................................... 47
Watch Dog Function select....................................................................................................................... 49
4.5.2 System AGENT SA..................................................................................................................................50
Graphics Configuration ............................................................................................................................. 50
Memory Configuration.............................................................................................................................. 51
GT- Power Management Control ............................................................................................................. 51
4.6 BOOT...............................................................................................................................................................52
CSM16 Parameters.................................................................................................................................... 52
4.7 SECURITY..........................................................................................................................................................54
4.8 SAVE AND EXIT ..................................................................................................................................................55
4

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
Chapter 1: Product Introduction
1.1 Key Features
System
CPU
Intel® Core™ i7 Haswell , BGA type Core i7-4700EQ (4C x 2.4/1.7 GHz), 6M
Cache (47W)
Chipset
Intel® QM87 PCH
Ethernet Chipset
Intel® I210-IT & I217-LM GbE
Memory
1 x DDR3 1600 XR-DIMM up to 8 GB with ECC
Expansion Slot
1 x mPCIe w/ SIM slot
Storage Device
1 x SATA III 6 Gb/s 2.5" SSD/HDD
Front I/O
Power Button
1 x dual color backlight button
Power LED
1
HDD LED
1
LAN Active/Speed LED
4
USB
2 x USB 3.0
COM
2 x RS232 with 5V/12V selectable
Power
1 x Terminal Block
Rear I/O
Ethernet
4 xRJ45
COM
2 x RS232/422/485 with 5V/12V selectable (Default RS232)
USB
2 x USB 3.0
DVI-I
1 x 29-pin DVI-I connector
DisplayPort
2 x 20-pin DP connector
Audio
1 x MIC, 1 x Line out
Display
Display Interface
1 x DVI-I connectors (female); resolution up to 1920 x 1200@60 Hz,
2 x DisplayPort : DisplayPort connectors (female); resolution up to 3840 x
2160@60 Hz
Graphics Controller
Onboard Intel® HD 4600 graphics
Mechanical & Environment
Power Requirements
9V to 36V DC-in, AT/ATX mode supports with power delay on/off
Dimension
(W xHxD)
262 x 149 x 66 mm
(10.31" x 5.87" x 2.60")
Weight
4.32kg (9.52lbs)
Operating Temp.
-40 to 70°C (ambient with air flow)
Storage Temp.
-40 to 85°C
Relative Humidity
5% to 95%, non-condensing
Serial Interface & Signals
Serial Standards
1x RS-232/422/485 port, Jumper-selectable (DB9 male)
RS-232
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422
TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w
TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w
Data+, Data-, GND
5

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
Standards and Certifications
MIL-STD-810G Test
Method 507.5, Procedure II (Temperature & Humidity)
Method 514.6, Procedure I (Category 20 & 24, Vibration)
Method 516.6, Procedure I (Mechanical Shock)
Method 501.5, Procedure I (Storage/High Temperature)
Method 501.5, Procedure II (Operation/High Temperature)
Method 502.5, Procedure I (Storage/Low Temperature)
Method 502.5, Procedure II (Operation/Low Temperature)
Method 503.5, Procedure I (Temperature shock)
EMC
CE and FCC compliance
Green Product
RoHS, WEEE compliance
*Specifications are subject to change without notice*
6

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
1.2 Front Panel Components
1
2 x USB 3.0 (Type A)
2
LED Indicators
3
2 x DB9 (2 x RS232)
4
Power Button
5
Power Input (9~36V DC in)
6
Swappable 2.5” HDD Tray
1.3 Back Panel Components
1
Audio Jack (1 x MIC, 1 x Line Out)
2
4 x RJ45 LAN Ports
3
2 x DisplayPort
4
1 x DVI-I
5
2 x DB ( 1 x RS232/422/485 with 5V/12V selectable, 1 x RS232)
6
2 x USB3.0 (Type A)
7

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
1.4 Mechanical Dimensions
8

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
Chapter 2: Jumpers and Connectors Locations
This chapter describes the jumpers and connectors on the systems’ motherboard.
2.1 Front Panel Connector Pin Definitions
Status Indicators
LAN1 LED STATUS
LED1
Light
Dark
Flash
GREEN
Link
Un-link
Activity
RED
1000M
100M
NA
LED2 LED STATUS
LED2
Light
Dark
Flash
GREEN
Link
Un-link
Activity
RED
1000M
100M
NA
POWER/HDD LED
LED2
Light
Dark
Flash
GREEN
Power On
Power Off
NA
RED
NA
HDD un-access
HDD access
USB3.0 CN19: USB*2
LOWER USB
UPPER USB
PIN
DEFINITION
PIN
DEFINITION
1
USB_VCC2
10
USB_VCC3
2
USBD0-
11
USBD1-
3
USBD0+
12
USBD1+
4
GND
13
GND
5
USB_SSRX3N_C
14
USB_SSRX4N_C
6
USB_SSRX3P_C
15
USB_SSRX4P_C
7
GND
16
GND
8
USB3TN3
17
USB3TN4
9
USB3TP3
18
USB3TP4
9

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
COM3: RS232 with 5V/12V select by jumper
COM4: RS232 with 5V/12V select by jumper
PIN
DEFINITION
PIN
DEFINITION
1
DCD
6
DSR
2
RXD
7
RTS
3
TDX
8
CTS
4
DRT
9
RI (Default)
5
GND
POWER BUTTON
Orange Backlight
Blue Backlight
Power Off
Power On
DC IN : DC Adapter Power Input
PIN
DEFINITION
1
+VIN
2
+VIN
3
GND
4
GND
2.2 Rear Panel Connector Pin Definitions
LAN1: Intel i217LM
LAN2: Intel I210IT
LAN1
LAN2
PIN
DEFINITION
PIN
DEFINITION
1
D0+
1
D0+
2
D0-
2
D0-
3
D1+
3
D1+
4
D2+
4
D2+
7
D2-
7
D2-
8
D1-
8
D1-
9
D3+
9
D3+
10
D3-
10
D3-
LAN3: Intel i210IT
LAN4: Intel I210IT
LAN3
LAN4
PIN
DEFINITION
PIN
DEFINITION
1
D0+
1
D0+
2
D0-
2
D0-
3
D1+
3
D1+
4
D2+
4
D2+
7
D2-
7
D2-
8
D1-
8
D1-
9
D3+
9
D3+
10
D3-
10
D3-
10

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
COM1: RS232/422/485 with 5V/12V selectable (Default RS232)
COM2: RS232/422/485 with 5V/12V selectable (Default RS232)
Pin
RS-232
RS-422
Half Duplex RS-485
1
DCD#
TX-
D-
2
RXD
TX+
D+
3
TXD
RX+
NA
4
DTR#
RX-
NA
5
GND
GND
GND
6
DSR#
NA
NA
7
RTS#
NA
NA
8
CTS#
NA
NA
9
RI# (Define by JP12)
RI# (Define by JP12)
RI# (Define by JP12)
USB3.0 CN18: USB3.0 *2
LOWER USB
UPPER USB
PIN
DEFINITION
PIN
DEFINITION
1
USB_VCC0
10
USB_VCC1
2
USBD2-
11
USBD3-
3
USBD2+
12
USBD3+
4
GND
13
GND
5
USB_SSRX1N_C
14
USB_SSRX2N_C
6
USB_SSRX1P_C
15
USB_SSRX2P_C
7
GND
16
GND
8
USB3TN1
17
USB3TN2
9
USB3TP1
18
USB3TP2
11

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
2.3 Internal Connector
MCARD1: Mini PCIE Card Slot<COLAY mSATA>
PIN
DEFINITION
PIN
DEFINITION
1
WAKE#
2
3.3VAUX
3
COEX1
4
GND
5
COEX2
6
1.5V
7
CLKREQ#
8
UIM_PWR
9
GND
10
UIM_DATA
11
REFCLK-
12
UIM_CLK
13
REFCLK+
14
UIM_RESET
15
GND
16
UIM_VPP
17
Reserved
18
GND
19
Reserved
20
W_Disable#
21
GND
22
PERST#
23
PERn0
24
+3.3Vaux
25
PERp0
26
GND
27
GND
28
1.5V
29
GND
30
SMB_CLK
31
PETn0
32
SMB_DATA
33
PETp0
34
GND
35
GND
36
USB_D-
37
GND
38
USB_D+
39
+3.3VAUX
40
GND
41
+3.3VAUX
42
LED_WWAN#
43
GND
44
LED_WLAN#
45
Reserved
46
LED_WPAN#
47
Reserved
48
1.5V
49
Reserved
50
GND
51
Reserved
52
3.3VAUX
12

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
Chapter 3: Installation
This chapter provide users the steps to install the HDD tray and vibration isolation base.
3.1 HDD tray
•Loosen the screws and pull out the 2.5”HDD tray.
•Pick 4 screws from the screw package.
•Put 2.5” HDD on the tray and use T9 torx driver to screw it up.
•Make sure HDD is fixed and push the tray back.
13

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
3.2 Vibration Isolation Base
•Let the computer be upside down.
•Locate the vibration isolation base on the computer by the screw holes.
•Pick 6 screws from the screw package.
•Use Phillips screwdriver to screw it up.
14

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
Chapter 4: AMI BIOS UTILITY
This chapter provides users with detailed descriptions on how to set up a basic system configuration
through the AMI BIOS setup utility.
4.1 Starting
To enter the setup screens, perform the following steps:
•Turn on the computer and press the <Del> key immediately.
•After the <Del> key is pressed, the main BIOS setup menu displays. Other setup screens can be
accessed from the main BIOS setup menu, such as the Chipset and Power menus.
4.2 Navigation Keys
The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS setup utility
hot keys can be used at any time during the setup navigation process.
Some of the hot keys are <F1>, <F10>, <Enter>, <ESC>, and <Arrow> keys.
Some of the navigation keys may differ from one screen to another.
Left/Right
The Left and Right <Arrow> keys moves the cursor to select a
menu.
Up/Down
The Up and Down <Arrow> keys moves the cursor to select a
setup screen or sub-screen.
+− Plus/Minus
The Plus and Minus <Arrow> keys changes the field value of a
particular setup setting.
Tab
The <Tab> key selects the setup fields.
F1
The <F1> key displays the General Help screen.
F10
The <F10> key saves any changes made and exits the BIOS setup
utility.
Esc
The <Esc> key discards any changes made and exits the BIOS
setup utility.
Enter
The <Enter> key displays a sub-screen or changes a selected or
highlighted option in each menu.
15

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
4.3 Main Menu
The Main menu is the screen that first displays when BIOS Setup is entered, unless an error has occurred.
You could setup these items on the Main menu:
System Language: Choose the system default language.
System Date: Set the date. Use Tab to switch between date elements.
System Time: Set the time. Use Tab to switch between time elements.
Access Level
Displays the access level of the current user in the BIOS.
16

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
4.4 Advanced Menu
This section allows you to configure and improve your system and allows you to set up some system
features according to your preference.
17

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
4.4.1 PCI Subsystem Settings
PCI, PCI-X and PCI Express settings.
PCI Common Settings
PCI Latency Timer: Value to be programed into PCI Latency Timer Register.
VGA Palette Snoop: Enable or disable VGA Palette Registers Snooping.
PERR# Generation: Enables or Disables PCI Device to Generate PERR#.
SERR# Generation: Enables or Disables PCI Device to Generate SERR#.
PCI Express Settings
Change PCI Express Devices Settings.
PCI Express Device Register Settings
Relaxed Ordering: Enables or Disables PCI Express Device Relaxed Ordering.
Extended Tag: If ENABLED allows Device to use 8-bit Tag field as a requester.
No Snoop: Enabled or Disables PCI Express Device No Snoop option.
Maximum Payload: Set Maximum Payload of PCI Express Device or allow System BIOS to select
the value.
Maximum Read Request: Set Maximum Read Request Size of PCI Express Device or allow System
BIOS to select value.
PCI Express Link Register Settings
ASPM Support: Set the ASPM level: Force L0s - Force all links to L0s state: AUTO - BIOS auto
configure: DISABLE- Disables ASPM. WARNING: Enabling ASPM may cause some PCI-E devices to
fail.
Extended Synch: If ENBLED allows generation of extended synchronization patterns.
18

WWW.STACKRACK.COM
Version 1.1
Revision Date: Oct, 07 2016
MIL-STD Rugged Computer
SR10B User’s Manual
Link Training Retry
Defines number of retry attempts software will take to retrain the link if previous training attempt was
unsuccessful.
Link Training Time out (uS)
Defines number of Microseconds software will wait before polling “Link training” bit in link status register.
Value range from 10 to 10000 uS.
Unpopulated Links
In order to save power, software will disable unpopulated PCI Express Links. If this option save to “Disable
Link”.
Restore PCIE Registers
On non-PCI Express aware OS’s some device may not be correctly reinitial after S3. Enableling this restore
PCI Express device configurations on S3 resume.
Warning: Enabling this may cause issues with other hardware after S3 resume.
19