Stage Ape Lighting PSYCHO User manual

PSYCHO Instructions
LED DMX Crystal Ball with red, blue and green beams...
6 x 1 watt LED’s
Modes include: 6 channel DMX, master/slave, multiple auto and sound modes with 9 speed
options for each mode.
Automatic mode: A1- red LED’s on, A2- green LED’s on, A3- blue LED’s on, A4- RGB color
change, A5- RGB color mix, A6- RGB color fade in/out, A7- RGB strobing, A8- mix of all
modes
Sound active mode: S1- strobe to sound, S2- color change an strobe to sound
9 LED rotation speeds can be controlled and set for each auto mode function. Low heat,
low power consumption (10W) and can run all night.
Unit size 7" x 7" x 6.5" weight 2 Lbs.
Instructions for Operation:
Auto/Sound Modes:
Press the mode button until A# appears on the LED display.
A1- RED LED’s on
A2- GREEN LED’s on
A3- BLUE LED’s on
A4- RGB color change

A5- RGB color mix
A6- RGB color fade in/out
A7- RGB strobing
A8- Mix of all modes
S1- Strobe to sound
S2- Color change and strobe to sound
After you have found the correct mode use the up and down buttons to select the
rotation speed from 1-9.
DMX Mode:
Press the mode button until the LED display reads A###. Then press the up and down
buttons to set the fixture's DMX value.
Channel 1 0-249 Strobe (0-183 is slow to fast and 184-249 is slow to fast),
250-255 ON
Channel 2 0-255 controls RED LED's
Channel 3 0-255 controls GREEN LED's
Channel 4 0-255 controls BLUE LED's
Channel 5 0-255 controls the speed of the rotation (slow to fast)
Channel 6 0-37 RED LED's (at medium rotation speed)
38-65 GREEN LED's (at medium rotation speed)
66-93 BLUE LED's (at medium rotation speed)
94-121 cycles through red, green and blue LED's with only 1 color on at a time
(at medium rotation speed)
122-150 cycles through combinations of red, green and blue (at medium rotation
speed)
151-177 cycles through RGB combinations fading in and out (at medium rotation
speed)
178-210 fast strobe through color combinations (at medium rotation speed)
211-233 cycles through combinations of RGB witch some fast strobing (different
than above, at medium rotation speed, looks like it could be an auto
mode)
234-255 Nothing
Master/Slave Mode:
Set the first fixture to any auto or sound active mode. Connect the second fixture to the
first using a DMX cable. Use the mode button to set the second fixture to DMX mode
A001. The units will then start doing the same thing.