Stairville DJ Lase RGB Pro Advanced 3000 User manual

DJ Lase
RGB Pro Advanced 3000
Showlaser
User Manual

Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
Internet: www.thomann.de
20.09.2022, ID: 522610

Table of contents
1 General information................................................................................................................................. 6
1.1 Further information........................................................................................................................... 7
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 9
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 16
4 Installation.................................................................................................................................................. 17
5 Starting up.................................................................................................................................................. 21
6 Connections and operating elements........................................................................................... 23
7 Operating.................................................................................................................................................... 29
7.1 Switching the device on / o....................................................................................................... 29
7.2 Operating on the unit..................................................................................................................... 30
7.3 SYSTEM menu.................................................................................................................................... 39
7.4 Functions in DMX mode................................................................................................................ 40
7.5 Operating via keyboard................................................................................................................. 46
7.6 Menu overview................................................................................................................................. 53
7.7 Resetting the device to factory defaults.................................................................................. 54
8 Technical specications....................................................................................................................... 55
Table of contents
DJ Lase RGB Pro Advanced 3000 3
Showlaser

9 Plug and pin assignments................................................................................................................... 58
10 Troubleshooting...................................................................................................................................... 61
11 Cleaning....................................................................................................................................................... 64
12 Protecting the environment.............................................................................................................. 65
Table of contents
4DJ Lase RGB Pro Advanced 3000
Showlaser

DJ Lase RGB Pro Advanced 3000 5
Showlaser

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
6DJ Lase RGB Pro Advanced 3000
Showlaser

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
1.2 Notational conventions
This manual uses the following notational conventions:
General information
DJ Lase RGB Pro Advanced 3000 7
Showlaser

The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
ðAutomatic operation is started.
3. Switch o the device.
References to other locations in this manual are identied by an arrow and the specied page
number. In the electronic version of the manual, you can click the cross-reference to jump to
the specied location.
Example: See Ä ‘Cross-references’ on page 8.
Letterings
Displays
Instructions
Cross-references
General information
8DJ Lase RGB Pro Advanced 3000
Showlaser

1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – laser radiation.
General information
DJ Lase RGB Pro Advanced 3000 9
Showlaser

Warning signs Type of danger
Warning – dangerous optical radiation.
Warning – suspended load.
Warning – danger zone.
General information
10 DJ Lase RGB Pro Advanced 3000
Showlaser

2 Safety instructions
This unit is used to project laser light eects; it is intended for show applications only. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the operating life of the device by regular breaks and by avoiding frequent
switching on and o. The device is not suitable for continuous operation.
Intended use
Safety instructions
DJ Lase RGB Pro Advanced 3000 11
Showlaser

Laser safety requirements are based on DIN EN 60825-1:2015. The corresponding accident pre‐
vention regulation of the Accident Prevention and Insurance Association in Germany is DGUV
V11.
This device contains a class-4 laser. It comes equipped with a safety key and a jack for con‐
necting an external safety switch. Always remove the key when the device is not attended by a
trained operator.
As an operator you are responsible for the safety of all persons present. Familiarize yourself
with the laser safety regulations that apply in your country. To ensure safe operation, it is
important to pay attention to the following instructions.
Prior to commissioning, the company/operator must appoint a qualied person as laser pro‐
tection ocer in writing and notify the operation of the laser equipment to the Accident Pre‐
vention and Insurance Association and to the authority responsible for occupational safety. In
the event of public use, the complete laser equipment must be approved by an expert prior to
commissioning.
Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking
hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and
choke! Never let children unattended use electrical devices.
Laser safety basics
Safety instructions
12 DJ Lase RGB Pro Advanced 3000
Showlaser

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts
inside. Do not use the device if covers, protectors or optical components are missing or damaged.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable
or the plug. Failure to do so could result in electric shock/death or re. If in doubt, seek advice from a registered electrician.
DANGER!
Laser radiation – avoid exposure to beam
The device contains a class-4 laser, classied according to EN 60825-1:2015. Do not look into the laser beam. The laser beam can
injure your eyes when you directly look into it. Do not expose yourself to the laser beam. The laser beam can cause skin burns. In this
context take extreme care when using converging optical instruments.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.
NOTICE!
Laser radiation – risk of re
Keep the area exposed to laser radiation free from ammable substances.
Safety instructions
DJ Lase RGB Pro Advanced 3000 13
Showlaser

NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked ames.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid
direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctuations and do not switch the device on immediately
after it was exposed to temperature uctuations (for example after transport at low outside temperatures). Dust and dirt inside can
damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other malfunction.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC
outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the
user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric
shock or re.
NOTICE!
Possible damage due to installation of a wrong fuse
The use of dierent types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used.
Safety instructions
14 DJ Lase RGB Pro Advanced 3000
Showlaser

NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time
cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces‐
sary, i.e. felt pads or similar.
Safety instructions
DJ Lase RGB Pro Advanced 3000 15
Showlaser

3 Features
Professional RGB laser for use in all event areas:
nColour mixing based on analogue diode modulation
nLaser power: 3000 mW
nLaser class: 4
nControl options:
– DMX-512 (20 channels)
– ILDA
– Infrared remote control (included)
– built-in buttons and display
– USB keyboard (included)
nSound-control with preprogrammed patterns
nAuto operation with preprogrammed patterns
nManual control with text input and countdown via USB keyboard
nSimultaneous menu items indication on the display and as laser projection
nKey switch secured
nSuitable for truss or ceiling mounting
Features
16 DJ Lase RGB Pro Advanced 3000
Showlaser

4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
You can install the device standing or hanging. When in use, the device must be mounted at a
solid surface or clamped to an approved truss.
Work from a stable platform whenever you install or move the device or when you perform
any kind of maintenance. Block access under the work area.
Connect the external safety switch (not supplied) to the provided connection socket on the
device. If you press the external switch, the laser beam will be switched o immediately.
Observe the safety instructions of the switch manufacturer and the regulations for the
intended use.
Safety switch (emergency stop)
Installation
DJ Lase RGB Pro Advanced 3000 17
Showlaser

In order to meet the limits for maximum irradiation (MZB limit value for the non-hazardous
irradiation of the eye or the skin with a laser), the device must be installed at a height of at
least 2.7 m according to the DGUV V11 valid in Germany.
The determination of the MZB limit values depends on the specic environmental conditions
in individual cases and must be carried out by the responsible laser protection representative
on site, based on the applicable standard DIN EN 60825-1.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
DANGER!
Follow the instructions in the chapter titled "Safety Instructions" in the user
manual.
To avoid laser emission, remove the safety key before you start to install the
device.
Minimum height
Installation
18 DJ Lase RGB Pro Advanced 3000
Showlaser

WARNING!
Stray laser radiation
Inadequately secured additional components may cause stray laser radiation.
Make sure that all additional components are adequately secured.
NOTICE!
Risk of overheating
The distance between the light output and the illuminated surface must be more
than 2.0 m (78.7 in).
Always ensure sucient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
Installation
DJ Lase RGB Pro Advanced 3000 19
Showlaser

Press the lock of the battery holder to the centre of the housing and pull out the battery holder
like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing
base of the remote control. Slide the battery holder back into the remote until it clicks into
place.
When shipping, the battery is already installed in the remote and protected against discharge
by a transparent plastic foil. Remove the plastic foil prior to rst use.
NOTICE!
Risk of re due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries.
Ensure that proper polarity is observed when inserting batteries.
NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device.
Take batteries out of the device if it is not going to be used for a longer period.
Inserting the battery into the
remote control
Installation
20 DJ Lase RGB Pro Advanced 3000
Showlaser