Stalgast 779131 User manual

TOASTER
Model: 779131, 779161
INSTRUCTION MANUAL
Stalgast sp. z o.o. Staniewicka 5 Street 03-310 Warsaw
tel.: [phone] fax: [phone] www.stalgast.com email: [email protected]
v2.0 -06.2016

- 2 -
1. SAFETY INSTRUCTIONS .........................................................................................................3
2. TECHNICAL DATA ....................................................................................................................3
3. STRUCTURE OF THE DEVICE .................................................................................................4
4. INSTRUCTION ..........................................................................................................................4
4.1. Operating panel ....................................................................................................................................................4
4.2. Assembly instruction ............................................................................................................................................ 4
5. OPERATION...............................................................................................................................5
5.1. Start-up ................................................................................................................................................................. 5
5.2. Operation of a toaster with ceramic heating elements and a switch ................................................................ 5
6. CLEANING AND MAINTENANCE .........................................................................................5
7. DISPOSING OF USED EQUIPMENT........................................................................................5
8. WARRANTY...............................................................................................................................5
TABLE OF CONTENTS

- 3 -
Thank you for purchasing our product. Please carefully read this instruction manual before rst use.
Reproduction of this manual without the consent of the manufacturer is prohibited.
The photos and drawings are illustrative and may differ from the purchased device.
CAUTION: The manual should be kept in a safe place, available to the staff. The manufacturer reserves the right to change
the technical parameters of the device without prior notice.
1. SAFETY INSTRUCTIONS
•Incorrect operation and improper use may result in serious damage to the device or injuries to persons.
•The device should only be used for the purpose for which it was designed.
•The manufacturer assumes no liability for any damages caused by incorrect operation and improper use of the device.
•During operation the device and the power cable plug must be protected against contact with water or other liquids. If the
device accidentally falls into water, it is necessary to immediately pull the plug out from the socket, and then commission
the inspection of the device by a professional.
Failure to follow this instruction may lead to life-threatening situations.
•Never open the housing of the device by yourself.
•Do not stick any items into the housing of the device.
•Do not touch the power cord plug with wet hands.
•Regularly inspect the condition of the plug and the cable. In the event any damage to the plug or the cable is detected, it
should be repaired at an authorized repair point.
•In case the device falls or is damaged in any other way, before further use it is always necessary for it to be inspected and
possibly repaired at a specialized repair point.
•Never try to repair the device by yourself - it could lead to life-threatening situations.
•Protect the power cable from contact with sharp or hot objects and keep it away from open ames. If you want to discon-
nect the device from the electrical socket, always grab it by the plug and never pull by the cord.
•Secure the cable (or its extension cord) to ensure that no one pulls it from the socket by mistake and that no one trips
over the cable.
•Control the operation of the device during use.
•Do not allow for the device to be used by minors, people with physical or mental disabilities and people with impaired mo-
bility, as well as persons without the appropriate experience and knowledge regarding the proper use of the device. Such
persons can operate the device only under the supervision of a person responsible for safety.
•If the device is not currently in use or is cleaned, it is necessary to always unplug it from the power source by removing the
plug from the socket.
• Caution: If the plug of the power cord is connected to the electrical socket, the device remains energized.
•Switch the device off before pulling the plug from the socket.
•Never pull the device by the power cord.
2. TECHNICAL DATA
MODEL NUMBER OF
GR ATES
DIMENSIONS
(mm)
OPERATING
HEIGHT
(mm)
DIMENSIONS OF
THE GRATES
POWER
(kW)
WEIGHT
(kg)
779131 1460x300x305 90 355x200 2 8
779160 2460x300x440 100+100 2x355x200 310

- 4 -
3. STRUCTURE OF THE DEVICE
4. INSTRUCTION
4.1. Operating panel
Switches of the
heating elements Timer
4.2. Assembly instruction
The installation procedures must be performed by a qualied technician in accordance with the currently applicable laws and
standards. After removing the device from the packaging, peel off the adhesive lm protecting the steel. Any glue residues
must be carefully removed (do not use abrasive cleaning agents). The device should be leveled using the adjustable feet. The
device is adapted for operation with a network power supply whose characteristics are compatible with those specied on
the nameplate. In the power cord, the ground connector is color-coded in yellow and green. The device has a power cord
intended for use with a power supply whose properties are compatible with those specied on the nameplate. The device
should be connected to a power supply with a voltage of 230 V and is equipped with a Schunk plug.
Before connecting the device, please make sure that:
a. The magneto-thermal switch can withstand the load of the device (see: nameplate);
b. The source of power supply has a socket with grounding with appropriate properties.
c. The socket or the switch used for the connection are easily accessible from the device.

- 5 -
5. OPERATION
5.1. Start-up
Before rst use, activate the empty device for about 10 minutes in order to burn out the oil and thermal insulation residue,
which may cause an unpleasant smell. After completing this step, it is necessary to thoroughly clean the device and its
components using a damp cloth with a non-abrasive cleaning agent.
5.2. Operation of a toaster with ceramic heating elements and a switch
In order to start the device turn the timer to the appropriate time. The maximum available time is 15 minutes. Switch the
upper switch in order to activate the upper heating elements and the bottom switch in order to activate the bottom heating
elements. The central heating elements are only controlled using the timer. After the expiry of the selected time the heating
elements will turn off automatically.
6. CLEANING AND MAINTENANCE
During the cleaning and maintenance of the device, make sure that it is disconnected from the source of power supply in order
to prevent accidents.
Frequent emptying of the crumbs tray is recommended.
The surfaces of the toaster should be cleaned using a soft cloth, without any caustic cleaning agents.
The On/Off switches may only be cleaned with a dry cloth. It is prohibited to wash the device, including the housing, using a
stream of water, as this could cause the water to get inside the device and damage it.
7. DISPOSING OF USED EQUIPMENT
You can return your old device after the end of use or when buying a new device at Stalgast. Send the device to us and a
specialized company will dispose of it in accordance with the Waste Electrical and Electronic Equipment Act (Journal of Laws
of 2005, No. 180, item 1495).
8. WARRANTY
The seller shall be liable under the warranty or guarantee.
In the event of damages resulting from the formation of limescale deposits in the device, they are not subject to repair under
warranty. The warranty does not cover damages caused by external forces such as lightning, changes in supply voltage,
incorrect setting of the voltage value, supply from an inadequate power outlet, mechanical, thermal, chemical damages to the
equipment and the defects caused by them
Warranty exchange does not cover such elements as: light bulbs, rubber components, heating elements damaged by limescale,
screws and elements undergoing natural wear, e.g. burners, rubber seals and all kinds of mechanically damaged elements.