Standard NIXXO BANTAM User manual

USER’S MANUAL
610-E&F-32
STANDARD TELECOM CO., LTD.
926 KWANYANG 2-DONG, DONGAN-KU, ANYANG KYUNGGI-DO,
KOREA. TEL : [phone] FAX : [phone]
STANDARD TELECOM AMERICA, Inc.
15251 ALTON PARKWAY, SUITE 100 IRVINE, CA 92618
TEL:[phone] FAX:[phone]
Web:www.nixxopagers.com
USER’S MANUAL
STANDARD TELECOM CO., LTD.
926 KWANYANG 2-DONG, DONGAN-KU, ANYANG KYUNGGI-DO,
KOREA. TEL : [phone] FAX : [phone]
STANDARD TELECOM AMERICA, Inc.
15251 ALTON PARKWAY, SUITE 100 IRVINE, CA 92618
TEL:[phone] FAX:[phone], 1592
Web:www.nixxopagers.com

External view and features of Nixxo-Bantam
1. Features .................................................................................................................... 4
2. External view of pager ..................................................................... 5
3. LCD Display ....................................................................................................... 6
4. Button for operation .............................................................................. 7
Instructions on Nixxo Bantam Functions
1. The usage of Nixxo-Bantam ................................................ 8
2.
The usage of various function for Nixxo-Bantam 10
3.
The usage of useful function for Nixxo-Bantam 28
4. Battery information and replacement ................30
T
3
ABLE OF CONTENTS
Getting Started
1. English user’ s Manual 3
2. French User’ s Manual 32

2. External view and its name
5
E
4
xternal view and features of Nixxo-Bantam
1. Features
Service area indication
Message Lock
Date and time stamping
Receiving time stamping
Automatic power On/Off(AM 01:00~AM 05:00)
Low battery indication
Unread message indication
Message full indication
1 tone and 2 melody alert
Stop-watch
Continued message display(up to 12 digit per slot)
Repetition message detection
Individual or all message deletion
LCD Window
Function
Button Battery Cover
Read
Button
Holder

7
4. Button for operation
Button Name Function
Power On/Off
Function Function selection
Button Beep(Melody)/Vibration
selection
Read Button Read & Search Messages
Stop beep & vibration
6
3. LCD Display
: Beep alert : Vibration
: Melody : Time setting
: Alarm : Message Lock
: Stop-watch
: Automatic On/Off
: Battery replacement
indication : Repeated message
: Service area indication
: Continued message
Description

(LCD display in the
vibration mode)
If you want to change the activation mode from vibration
to beep(melody) mode, press the function button until
“Tone On?” displays and then press the function button
to set the beep(melody) mode.
(LCD display in the
beep mode)
(LCD display in the
melody mode)
9
1. The usage of Nixxo-Bantam
The selection of activation mode
Beep or Melody mode: If you press the function button,
the lamp will be on. If you press the function button one
more time,
the LCD will be
displayed as below.
If you press the function button again at this time, the
pager is on vibration mode.
I
nstructions on Nixxo Bantam Functions
8

2. Set Date &
Time mode
3. Alarm time setting
4. Melody setting
5. Power On/Off
11
2. The usage of various function for Nixxo-Bantam
To select Date, Alarm, Melody Power-Off function.
Press the function button twice until Tone off or Tone
displays. Then you can select each function by pressing
the read button. You can set each function by pressing
function button.
1. Activation mode 1
10

2. Activation mode 2
3. Erase all mode
4. Set Auto
5. Stop-watch
13
Followings are functions for Erase all, Auto on/Off and
Stop-watch.
To get into the above function mode, after pressing the
function button once to make the lamp come on, press
the function button again for more than two seconds.
Then “Erase All” will display on LCD. At this display,
you can select each function by pressing the read button
and set each function by pressing the function buttion.
1. Stand-by mode
12

If you press the function button at this time, the month
digit of month will be blinking and you can select the
target digit by pressing the read button.
To set the selected digit, press the function button. Then
you can set the date, time, minute and am/pm by above
procedure.
15
3. The usage of useful function for Nixxo Bantam
Set date & Time
Press the function button. It will display activation
mode.(Tone-On or Tone-Off) Then press the It will
display “SET TIME”.
14
NOTE : Please adjust the date in Feb. of ordinary year because
the pager will go to Feb. 29 regardless of leap year.

Setting procedure is
same as that of SET
Date & Time.
To activate alarm function, set the “ON/OFF” prompt to
“ON” by pressing the read button.
To escape from alarm function, set to “OFF”.
17
Set Alarm Time
This function is useful for morning call or appointment
time. It will beep for 30 seconds. To stop the beep, press
the read button.
How to set the alarm
Please select the SET ALARM in the function selection
mode.
Setting procedure is same as that of SET DATE & Time.
16

Power On/Off
Select the “Power off” in function selection mode.
Then press the function button to turn power off. To
made power on, press the function button for more than
2 seconds.
19
Set Melody
Please select the MELODY SET in the function
selection mode
And then press the Function button. Selected melody will
be played with melody number. Press the Read button to
set the Melody and then escape the setting mode by
pressing Function button.
18
Notice : If the pager set to the tone mode(No.1), the pager will
vibrate first and then beep succeedingly once the user make
Power On from Power Off status. If the pager set to melody
mode(No.2 and No.3), the pager only utter designated melody
without vibration.