Stanton Deck Control Surface SCS.1d User manual

SCS.1
d
DeckCo
n

d

n
trolSurfac
e
e






U
S
S
ERMAN
U

U
AL

ii

ImportantSafetyInstructions

•Readandfollowtheprovidedinstructionsbeforeoperatingthisunit.
•Adheretoallwarningsandsecurityadvices,andretainthisdocumentforfuturereference.

Installation:Installtheunitinaccordancewiththeprovidedinstructions

PowerSupply:
•Theunitshouldbeconnectedtoapowersupplyoutletonlyofthevoltageandfrequencymarkedonitsrearpanel.
•Thepowersupplycordshouldberoutedsothatitisnotlikelytobewalkedonorpinched.
•Thepowersupplycordoftheunitshouldbeunpluggedfromthewalloutletwhenitistobeunusedforalongperiodoftime,orduring
electricalstorms.

PlacementandEnvironment:
•Locatetheunitawayfromdirectsunlightandanyequipmentthatproducesheatsuchaspowersupplies,amplifiers,andheaters.
•Placeyourmixeronstablesurfaces,awayfromvibrationandfromsourcesthatgeneratehumornoise,suchastransformers,orelectric
motors.
•Thelocationandpositionoftheunitshouldnotinterferewithitsproperventilation.
•Donotusethisunitnearwater.Forexample,nearabathtub,washbowl,kitchensink,laundrytub,inawetbasement,ornearaswimming
pool.
•Toreducetheriskoffireorelectricshockdonotexposetheequipmenttorainormoistureoruseitindamporwetconditions.
•Protecttheunitfromexcessivedirtanddust.
•Avoiddrinksspillage,tobaccoash,andsmoke(especiallythatassociatedwithsmokemachines).
•Donotplaceheavyobjectsontheunitsurface.

Cleaning:Unplugtheunitfromthewalloutletbeforecleaning.Neverusebenzene,thinner,orothersolventsforcleaning.Useonlyasoftdamp
cloth.

Service:
•Theunitcontainsnouser‐serviceableparts.
•Themanufacturerisnotresponsibleforanydamageorpersonalinjuryresultingfromunauthorizeduserservicingormodifications.Please
readthewarranty.
•Thewarrantywillbevoidifanyunauthorizedservicebytheuserisdetected.
•Ifserviceisrequired,pleasecontactStantonTechat+1954.316.1500(Option3)




iii

TableofContents

1.Introduction..........................................................................................................................................................1
1.1WelcometotheSCS.1d!...............................................................................................................................1
1.2Overview......................................................................................................................................................2
1.3Unpacking.....................................................................................................................................................2
2.ConnectingtheSCS.1...........................................................................................................................................3
2.1ConnectingtoYourComputer.....................................................................................................................3
2.2ConnectingtotheSCS.1dtotheSCS.1m.....................................................................................................4
2.3SCS.1dSetups...............................................................................................................................................4
3.SCS.1dDescription...............................................................................................................................................5
3.1TopPanelFunctionalGroups.......................................................................................................................5
3.2EncoderSection...........................................................................................................................................7
3.3TriggerSection.............................................................................................................................................7
3.4Platter/GlobalSection................................................................................................................................8
3.5PitchSection.................................................................................................................................................9
3.6TransportSection.........................................................................................................................................9
3.7 PresetSwitcherSection………………………………………………………………………………………………………………………10
4.SCS.1SoftwareInstallation................................................................................................................................11
4.1WindowsXP...............................................................................................................................................12
4.2MacOSX....................................................................................................................................................19
5.DaRouter............................................................................................................................................................23
5.1AboutDaRouter.........................................................................................................................................23
5.2AnatomyofDaRouter................................................................................................................................23
5.2.1SectionA................................................................................................................................................24
5.2.2SectionB................................................................................................................................................24
5.2.3SectionC................................................................................................................................................26
5.3UsingDaRouter..........................................................................................................................................27
5.4LoadingaPreset.........................................................................................................................................27
5.5UsingaPresetfortheFirstTime................................................................................................................27

6.Troubleshooting.................................................................................................................................................28

7.Specifications......................................................................................................................................................29

Appendix.....................................................................................................................................................................30
OptimizingComputersfor1394(FireWire)............................................................................................................30
DPC(WindowsXP‐Vista).....................................................................................................................................30
Windows1394aBandwidthLimitingIssue/SidSpeedFix(WindowsXP‐Vista).................................................35
FireWireChipsets................................................................................................................................................45


1. Introduction

1.1 WelcometotheSCS.1d!

ThankyouforpurchasingSCS.1d!TheSCS.1d(StantonControlSystem1deck)isthepremierdeckcontrolsurface
forlaptopDJs,remixers,VJs,andproducers.
Beforewebegin,thereareafewimportantissueswewouldliketobringtoyourattention.
Thereisasoftwarecomponenttothishardware.ItiscalledDaRouter.DaRouterisakindof“MIDIprocessor”that
allowstheuseofpresets.Thesepresetscanbeapplicationspecificmappings,orgenericmapsthatcanbeapplied
toanumberofdifferentsoftwarepackages.Infact,youmayalreadybefamiliarwiththeDaRoutersoftware
becauseitisalsousedwithourSCS.3lineofcontrollers.Well,DaRouterisevenmoreimportantforthe
SCS.1controllersthanitisfortheSCS.3controllers.ThisisbecausetheDaRoutersoftwarefortheSCS.1controllers
alsocontainsthedriverforthem.Soitisimportantforyoutogotohttp://www.enterthesystem.com/scs1to
downloadandinstallthelatestDaRoutersoftware.Thissinglesoftwarepackagegivesyouthelatestpresetsand
thelatestversionofyourdriver.BesuretokeepyourDaRoutersoftwareupdatedsoyoucantakeadvantageof
newpresetsandfeaturesastheybecomeavailable!
Thisbringsustothenextimportantissue.PleasedonotconnecttheSCS.1hardwaretoyourcomputerbeforeyou
gothroughthedriverinstall.Mostaudiointerfaceinstallers,FireWireorUSB,carrythesamewarning.Weknow
thatwhenyoubuynewgear,mostpeopleareexcitedtohookitallupandseewhatitcando,butinthiscase,itis
bettertowaituntilyouareprompted.Theprocesswillgolikethis…
•YoushouldconnectthepowertoyourSCS.1dandlocatetheFireWireconnector,butdonotconnectitto
thecomputeryet.
•DownloadandruntheDaRouterinstallerfortheSCS.1d.Thisinstallerislocatedat
www.enterthesystem.com/scs1
•OnWindowsadialogboxwillopentellingyoutoconnectandpowerupyourSCS.1d.Atthispoint,connect
theFireWirecabletoyourcomputer.OnaMaccomputeryouwilljustneedtoinstallDaRouterfirst,
howevernodialogwillshowforconnectingtheunits.
ThedriverwillthendetecttheSCS.1devicesconnectedtoyourcomputerandloadthedriversforthem.Allowthe
installertocontinuenormally.Followingthesestepsisagoodideaforanyhardwareinstallationyouhave,and
mightsaveyoufrompossiblyhavingtotroubleshootaproblemlater.
Finally,wewouldliketopointoutthatthedescriptionsofspecificfunctionalityoftheSCS.1daregeneric.
TheSCS.1disaMIDIcontrolleranddoesnotgenerateanyaudioitself.AlthoughitlookslikeaCDplayeror
turntable,itinfactisnot.ThefunctionalityofagivencontrolonthesurfaceoftheSCS.1d(likethepitchsliderfor
example)isdependentonwhatitisassignedto.Wehadtostartsomewhere,sowethoughtitwouldbebestto
describethefunctionalityofthegenericpreset.Whenyouareusingotherpresets,youcanclickonthePreset
DocumentationbuttoninDaRouter(it’sthe“?”button)tolearnallabouthowthatspecificpresetworkswithyour
newSCS.1d.

2

1.2 Overview

TheSCS.1dwasdesignedforhigh‐precisionsoftwarecontrol.Thankstoitsstraightforwardinterfaceandintuitive
ergonomics,theSCS.1dprovidesahostoftop‐notchfeaturesatyourfingertips,suchashigh‐torque10”motorized
platter,100mmmotorizedpitchfader,velocity‐sensitivepads,assignableencodersections,andmuchmore…

TheSCS.1d(deck)andtheSCS.1marethemaincomponentsoftheSCSystem1;Stanton‘smostadvanced
digitalcontrolsystemfortheprofessionalDJ.YoucanusetheSCS.1dinconjunctionwiththeSCS.1mfortight
integrationandfullcontrolofyourDJ/VJapplication’smainparametersorwithotheraudiointerfaces.
•Adjustablehigh‐torque10”motorizedplatterwithvinylsurfaceandsuperiortracking.
•High‐resolutionvinyltrackingsystemallowsforsuper‐accuratemixingandscratching.
•100mmpitchfadermotorizedtomaintainsyncwithsoftware.
•4Velocity‐sensitivepadsassignabletoloops,cuepoints,etc.
•AssignableEncodersectionwith360°ofLEDfeedback.
•LCD“scribblestrips”fortwo‐waycommunicationwithselectedsoftware.
•FamiliarTransportsectionfordirectmusiccontrol.
•PerfectforaddingmaximumcontrolcapabilitiesintoexistingDJsoftware.
•Easilycontrolsmultiplevirtualdecksforpowerfulmulti‐channelmixes.

Beforeyoustarthookingupyournewunit,let’scheckwhatisinthebox!


1.3 Unpacking

Pleasecheckthatyouhavereceivedthefollowingitems:

•(1)SCS.1dunit
•(1)FireWirecable
•(1)4to6pinFireWireadapter
•(1)Powercableandadapter(24V)
•(1)Feltslipmat
•(1)Vinylcontroldisc
•(1)SCS.1dManual

UponunpackingtheSCS.1d,youshouldplacetheslipmatontheplatterandthenplacetherecordontopofthe
slipmat.

Inadditiontotheaboveitems,rememberthattotakeadvantageoftheSCS.1dfullpotentialyouwillneedthe
SCS.1moratraditionalDJmixer,aMacorPCcomputer,aDJapplication,andtodownloadandinstallDaRouter
software.Solet’sgetstarted!


3

2. ConnectingtheSCS.1

2.1 ConnectingtoYourComputer

Figure2.1
Step1:Locatetheincludedpowercableandadapter(24V)andconnectitto the
SCS.1dandtoyourpowersource.(Figure2.1)

NoteIfyouownboththeSCS.1mandtheSCS.1d,thepoweradapterslookvery
similar.Lookingattheoutputvoltagewilltellyouwhichisforwhichcomponent,
(e.g.,12VfortheSCS.1m,and24VfortheSCS.1d).Thereisalsoalabeloneachof
thepowercordstospecifywhichproducttheyaretobeusedwith.



Figure2.2
Step2:AttachtheincludedFireWirecabletotheSCS.1d.TheFireWireportsare
clearlylabeledonthebackpaneloftheSCS.1d.(Figure2.2)


Figure2.3
Step3:DownloadandruntheDaRouterinstallerfortheSCS.1d.
AdialogboxwillopentellingyoutoconnectyourSCS.1d.Atthispoint,turnthe
SCS.1donandconnecttheFireWirecabletoyourcomputer’sFireWireport(Figure
2.3).DonotconnecttheSCS.1duntilprompted.


Onlaptops,therearetwodifferenttypesofFireWireports:6and4pin.Typically,youwillfind“fullsized”6pin
portsonApplelaptops.Ifyourcomputerhasafullsized(6pin)FireWireport,usetheincludedFireWirecableto
connectdirectlyfromtheSCS.1dtoyourcomputer.

MostPCswillhavea4pinFireWireport.Soifyouhavea4pinportonyourcomputer,connecttheFireWirecable
totheprovided4to6pinadapter,andthenjustplugittoyourcomputer’s4pinFireWireport.

NowthatpowerandFireWireareconnected,wecanexplorehookinguptheSCS.1dwiththeSCS.1m(ifused).


4

2.2 ConnectingtotheSCS.1dtotheSCS.1m

AlloftheSCS.1controllershavetwoFireWireportsonthem,sodevicescanbechainedtogetherifneeded.
SowhenconnectingasingleSCS.1dtotheSCS.1m,youwouldgofromtheunusedFireWireportontheSCS.1m
(Figure2.4),(theotherportisconnectedtoyourcomputer)toanopenportontheSCS.1d.(Figure2.5)
 
Figure2.4Figure2.5
Likewise,ifyou’reconnectingtwoSCS.1d’stoaSCS.1m,thenyouwouldgofromthefreeFireWireportonthefirst
SCS.1dtoaportonthesecond.AnyotherFireWiredevicesshouldgoattheendofthechainandnotbeforeanyof
theSCS.1controllers.
Let’stakealookoftheSCS.1dSetups.

2.3 SCS.1dSetups

ThefollowingconfigurationscanbeusedfortheSCS.1dfortypicalusecases:

SCS.1m+SCS.1d
Thismixer‐and‐deckconfigurationcanbeusedtoemulateadual‐decksetupbyusing
virtualdecksforcontrollingtransport,loop,andeffects,whileusingthemixertoblend
andEQsongsandsounds.Thissystemistheperfectentryintotheworldof
professionalSCSystemlaptopmixing.(Figure2.7)


Figure2.7
DualSCS.1d+SCS.1m
Thissetuprecreatesthe“traditional”DJsystem,allowinguserstohavetwophysical
decks,eachrepresentinganon‐screendeck(whichcaneasilybetoggledtofourdecks
byusingvirtualdecks).Themixerisusedforblending,channelEQ,etc,inatraditional
manner.ThissetupistailoredtowardsprofessionalDJswantingtoreplacetheir
existingsetupwithanSCSystemcontroller‐basedsolution.(Figure2.8)

Figure2.8
Single/DualSCS.1d+traditionalDJmixer
TheSCS.1d(s)canbeusedwithanexistingsoundcardtosendaudiooutputsfromDJ
softwareintoanexistinganalogDJmixer.ThisallowsuserstoincorporateSCSystem
decksintotheirsystemwhileusingtheirfavoritetraditionalDJmixer(Figure2.9).

Figure2.9

5

3. SCS.1dDescription

Inthischapter,wewillbrieflydescribethetoppaneloftheSCS.1d.

It’simportanttounderstandthattheSCS.1disatraditionalDJturntable/CDplayer“analogy”inacontrolsurface.
ThismeansthatwhiletheSCS.1dlookslikeaDJturntable/CDplayer,atitscore,itisreallyacontrolsurfacethat
sendsandreceivescontroldatatoandfromacomputer.Asacontrolsurface,theSCS.1d’sfunctionalityis
completelyderivedfromthehostapplication(software)thatitiscontrolling.

TheSCS.1dalsoutilizespresetsinDaRoutertodefineitscapabilities,whichcandrasticallychangeitsfunctionality
dependingonhowthepresetisconfigured.Soaswediscussthepanelandlayoutitisimportanttorememberthat
whenrunningaspecificpresetitsbesttoreadthedocumentationassociatedwiththatpresetasitwillexplainhow
theSCS.1distailoredtowardstheapplicationitisbeingusedwith.Sointhebelowexplanationswedescribethe
controlsandhowtheytraditionallymaybemappedintoanapplication.


3.1 TopPanelFunctionalGroups

ToeasilyunderstandthemainSCS.1dTopPanel,wehavedivideditinsixfunctionalgroups:

‐EncoderSection
‐TriggerSection
‐Platter/GlobalSection
‐PitchSection
‐TransportSection
‐PresetSwitcherSection


Onthenextpage,let’stakealookoftheFigure3.1:



TopPanel

Figure3.1


Now,let’s

FunctionalGr
o
takeacloserl
o
o
ups(continu
a
o
okofeachof
a
tion)
thefunctiona
6
lgroups.


7

3.2 EncoderSection

Thissectionconsistsoffourrotarypushencoders,eachwith
anLEDencoderringtoindicatethevalueoftheencoder,
andanLCD“scribblestrip”thatcanbeusedtoindicatethe
functionalityofeachencoder.Encodersareusedtocontrol
variableparameterssuchaseffectlevels.Encodersdonot
physicallystopwhenyouturnthem;insteadtheLED
encoderringsindicatethepositionofthecontrolyouare
adjusting.


3.3 TriggerSection

Thetriggersectionconsistsoffourvelocitysensitivepads,
fourLCD“scribblestrips”,andsevenclickingswitches.Each
pad,switchandscreenisbacklitbymulticolor(red,green,
orange)LED’s.Thevelocitysensitivepadsandswitchesare
typicallyassignedtotriggeractionssuchaplayingcue
points,movingloopsorkillingfrequencies.TheLCD
“scribblestrips”willdisplayfunctionalityandstatus
dependingonthepreset.


8

3.4 Platter/GlobalSection
Thissectioncontrolstheassignmentoftheplatteraswell
asglobalfunctionality.

TheDECKSELECTbuttonwillallowyoutogglevirtualdecks
onscreen.Inthiswaywhenyouswitchvirtualdecks,the
SCS.1dwillalsochangeitsstatetomatchtheonscreen
deck.ByusingonephysicalSCS.1dyoucancontrol
multiplevirtualdecks.

TheVINYL,CONTROLandBROWSEbuttonsallmodifythe
motorizedjogwheel’sfunctionalitywithintheapplication.
Themotorizedplatterisnormallyusedforscratchingand
scrubbingthroughasongwhen“VINYL”isactivated.
However,theControlbuttonallowstheplattertobefreely
usedasalargeparametercontrolsuchasscratchingan
effect.BROWSEisusedtoscrolltheplaylistsin
applicationsthatsupportmappingtobrowserview.
DependingonthecontrolmodetheENTERandCANCELbuttonswillallowforexpandedfunctionalitywiththe
platter.

SETUPbuttonwillallowforadjustmentsoftheoveralldeckcontroller.Uponpressingsetupyouwillseethe
currentfirmwareversion.Usingthefirstencoderwillallowyoutoselectavaluetochange;thesecondencoder
willallowyoutoadjustthevalue.
‐Contrast:AdjuststhecontrastoftheLCDscreens.
‐Torque:Adjuststhetorqueoftheplattertosimulatedifferentturntables.
‐MIDICh:ChangestheoutputMIDIchannelofthedevice.ItissuggestedNOTtochangethisas
presetsusuallyexpectthedecktosenddatafromthedefaultMIDIchannel.
‐Decay:Adjuststheaccelerationcurveoftheencoders.



9

3.5 PitchSection

Thepitchsectionrepresentsatraditionalpitchcontrol
foundonaCDplayerorturntable.However,thekey
differenceisthatthepitchcontrolismotorizedtosupport
functionalitysuchasauto‐syncinanapplicationand
updatingpositionwhenswitchingvirtualdecks.It’s
importanttonotstopthemotorizedfaderwhileit’smoving
topreventdamage.

TheRESETbuttonwillcenterthepitchsliderto0%
automatically.
TheRANGEbuttonwillchangethesensitivityofthepitch
slider(aslongastheapplicationsupportstheranges).











3.6 TransportSection

Thetransportsectionisanalogoustothetransportcontrols
onaCDplayerhoweveritplacesafewextrabuttonsfor
commonfunctionsfoundinDJapplications(suchasauto
sync).Eachofthe4maintransportbuttonsaremulticolor
backlittoindicatestatus.

Alongwiththe4maintransportbuttonsareseekforward
andbackwardsaswellasscanforwardandbackwards.
Abovetheseekandscanbuttonsisafreelyassignable
backlitbutton.



10

3.7 PresetSwitcherSection

Thepresetswitchersectioncontrolsswitchingofpresetson
theSCS.1d.Presetsaregenerallyrelatedtowardsswitching
presetsfortheencodersection,triggersectionorpitch
slider.Presetsaregroupsofcontrolswithfunctionality
focusedtowardsdoingasingletask.Forinstance,aloop
presetwillcontainallthecontrolsneededtocreate,move
andmodifyaloop.Presetconfigurationandfunctionality
arehighlydependentontheapplicationtheSCS.1disbeing
usedwith.Aswiththerestofthecontrolsit’svery
importanttoreadthepresetdocumentationfromwithin
DaRouterforinformationonhowtheunitisconfigured.




11

4. SCS.1SoftwareInstallation

BeforeinstallingtheSCS1software(DaRouteranddrivers)makesureyoufollowtheseguidelines:

1) Windows:DoNOTconnecttheSCS.1controller(s)untilpromptedbythedriverinstaller.
2) Windows:WhenintendingtousemultipleSCS.1controllersatonce(mixer+decks)makesureyou
connectALLthedevicesduringthedriverinstaller.
3) AlwayschecktheStantonwebsite(listedbelow)forthelatestdriversandfirmware.

TofullymaximizeSCS.1capabilitiesandtakeadvantageofitsgreatfeatures,somesoftwareneedstobeinstalled
withit.Infact,theSCS.1SoftwareInstallationprocessdiffersgreatlybetweenMacandPCcomputers.

‐OnaMac,theSCS.1disaclasscompliantFireWiredevice,whichmeansthatitwillconnecttothesystem
withoutdrivers,however,becausetheSCS.1dusesaproprietaryhighspeedMIDIsystemitisnecessaryto
installDaRoutertocommunicatewiththeSCS.1dandcreateavirtualMIDIportforthehostapplicationto
receiveMIDImessagesthrough.OntheMacyouwillsimplyneedtoinstallDaRouter,connecttheunit(s)
andstartusingyourdesiredpreset.

‐InWindows,ahighlevelFireWiredrivermustbeinstalledtocommunicatewiththeSCS.1d.Oncethisdriver
isinstalledtheSCS.1dandcancommunicatewithDaRouter.UponinstallingDaRouter,boththeFireWire
andvirtualMIDIportdriverareinstalled.ItisimportanttonotconnecttheSCS.1duntilprompted.Itisalso
importanttoconnectallunitsthatwillbeusedwheninstallingthedriver(ifusingmultipleSCS.1d’sorwitha
SCS.1m).

Ineithercase,(MacorPC)theDaRoutersoftwareneedstobeinstalled.Thissoftwareactsasanintermediary
betweenyourSCS.1controllersandyourperformancesoftware,interceptingandprocessingMIDImessages
beforesendingthemouttoyourapplicationofchoice.Thisprocesstakeslessthanamillisecond,andgivesyou
someamazingpower.NotonlydoesitallowyoutoquicklychangetheMIDIoutputoftheSCS.1controllers
(byswitchingpresets),italsoallowsforlogic‐basedprogrammingthatyourperformancesoftwaremayormaynot
becapableofperforming.Thismeansthatitisactuallypossibletoaddorchangesomefunctionalityinyour
softwareofchoice.ThiscanbeassimpleasaddingMIDIdatatoanapplicationthatdoesnotnormallysupportit,
tototallychangingthebehaviorofagivencontrol.

Inshort,ifyouareaPCuser,youwillrunoneinstallerthatwillinstalltheSCS.1driverandDaRouter.Ifyouarea
Macuser,youdonotneedtoinstallanydriverbutyoumustinstallDaRouter.

BeforewalkingthroughspecificinstallationproceduresforMacandPC,youwillneedtodownloadthelatest
versionofDaRouterfromtheStantonwebsite:

www.enterthesystem.com/scs1


So,let’sfollowthespecificinstructionsforeachplatform.

12

4.1 WindowsXP

1. Doubleclicktheexecutablefile(.exe).IfthefollowingOpenFile‐SecurityWarningappears,clickRun.
(Figure4.1)


Figure4.1

2. TheStantonSCS.1DaRouterSetupWizardwillguideyouthroughtheinstallationprocess.ClickNext.
(Figure4.2)


Figure4.2

13

3. Toinstallthesoftwareforthefirsttime,choosetheStandardoption.Toupdateyourpreviouslyinstalled
version,chooseCustom.Inthisexample,let’schooseStandard.(Figure4.3)


Figure4.3

4. ReadtheLicenseAgreement,selectthe“Iaccepttheagreement”option,andthenclickNext.
(Figure4.4)


Figure4.4

14

5. TheinstallationoftheASIO/highlevelFireWiredriverwillbegin.Whenyouareready,clickNext.(Figure
4.5)


Figure4.5

6. Inthisstep,youareabletochoosewheretoinstallthedriver.However,ifyoudonotreallyneedto
changethelocation,leavethedefaultsettingandclickInstall.(Figure4.6)


Figure4.6

15

7. Fileswillbegintocopyorifyouareinstallinganewdrivertheolddriverswillbeuninstalledbeforenew
filesarecopied.Whenpromptedtoconnectyourdevices(Figure4.7),turnONallSCS.1devicestobe
usedandthenconnecttheFireWirecablefromthedevice(s)toyourcomputerandclickOK.


Figure4.7

8. Waitforafewseconds,normaloperationwillresumeshortly.(Figure4.8)


Figure4.8

16

9. OncethefilesaredonecopyingclickNexttocontinue.(Figure4.9)


Figure4.9

10. ClickFinish.(Figure4.10)


Figure4.10


17

11. ReadinformationregardingthisbuildoftheinstallerthenclickNext.(Figure4.11)

Figure4.11

12. ClickFinish.(Figure4.12)


Figure4.12

That’sit.YouhaveinstalledtheSCS.1ddriverandDaRouter.