Starburst Technologies SB-HDQP-2130 User manual

!
!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !
!
!
8VSB / ATSC to QAM Processor
SB-HDQP-2130
!
!!! !! !
INSTRUCTION MANUAL
!
!
The content and design of this document is the intellectual property of PDi Communications, Inc. and is protected
under copyright law. Any duplication of this material without written consent of an authorized officer of this company
will be litigated to the fullest extent of the law.
!
Eagle Comtronics Inc. Customer Support •1-800-448-7474 1!
!
"#$!%&!

!
INTRODUCTION
Thank you for buying the SB-HDQP-2130 ATSC to QAM
processor. Please read this manual carefully to install, use
and maintain the modulator in the best conditions of
performance. Keep the manual at hand for future reference.
General
description
Main
features

2U design

Quick Boot-up
Covers frequency range from 54 to 860MHz

Local control via friendly front button Control Panel

Remote control via supplied utility
SAFETY
INSTRUCTION
All the safety and operating instructions should be read
before theproduct is operated. For safety purpose all
instructions are adhered to.
Cleaning
Unplug the unit from the rack before cleaning. Do not
use liquid or aerosol cleaners, use adamp cloth.
Attachments
Do not use attachment that are not recommended by
Manufacturer as they can cause hazards.
Water
and
moisture
Do not use this product near water.
Mounting
Ensure the unit is rack mounted securely on the wall or in the
19’’ cabinet as not to cause harm to anyone or to damage
the product by being dislodged.
Power
cord
protection
Power-supply cords should be routed so they are not
pinched or placed where they could cause atrip hazard.
Ventilation
Slots and openings in the housing are provided for ventilation
to prevent overheating and ensure reliable operation.These
openings should never be blocked or covered by
placing the unit on acarpet, flooring, furniture or fabric
surface. The unit should not be placed in abuilt-in
structure such as acupboard or rack unless proper
ventilation is provided.
Power
source
This unit should only be operated from the type of power
source indicated in the technical specification (page 3of this
manual).
Lightning
For added protection of this unit; unplug it from the wall
when left unattended or unused for long periods of time and
disconnect the cable system. This will protect the product
from lightning strike or power surges
Object
and
liquid
entry
Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or
short-our part that could result in afire or electric shock.
Never spill liquid of any kind on the unit.
Servicing
Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service person-
nel.
Damage
requiring
service
Unplug this unit from the wall or the cabinet and return it to
the qualified service personnel for sevicing if any of the
following occurs:
-The power supply cord or plug is damaged.
-Liquid has been spilled, or objects have fallen into the unit.
-The unit has been exposed to rain or water.
-If the unit has been dropped or damaged in anyway.
Heat
The unit should be positioned away from any heat source such as
radiators, fireplaces, cooking stoves, or other products (including
amplifiers) that produce heat.
Eagle Comtronics Inc. Customer Support •1-800-448-7474 2!
!

!
SPECIFICATIONS
Input channel
Combinations: 2!ATSC /2!QAM /1!ATSC +1!QAM
Input
QAM
Channel range: 2-134
Frequency range: 54-860MHz
QAM mode: 64QAM /256QAM
Data Rate: 26.9Mbps (64QAM), 38.8Mbps
Input Level: (-12 to +10dBmv)
RF
output
RF carriers: 2
Channel range: 2-134
Frequency range: 64QAM /256QAM
Data rate: 26.9Mbps (64QAM), 38.8Mbps
Input
8VSB / ATSC/ OFF AIR
Tuning range: UHF: 14-69, VHF: 2-13
Input Level: (-30 to +10dBmv)
Frequency range: 54-806MHz
Data rate: 19.392Mbps
CONTROL
Local operation: Front panel push button
Remote operation: Web browser
STREAM
PSIP: MGT/CVCT/STT regenerator
GENERAL
Dimensions: 68!50!250 mm
Weight 0.8 kg
Power source: DC 12V/ DC 5V
PWR. consumption: 12W
OPERATION
Manual Operation- Via front panel Push Buttons and LED Display
Web Interface/ Remote Operation – Via LAN Port
Manual Operation
To enter the Menu in manual mode, use this sequence of key strokes:
Key strokes = Press UP arrow, DOWN arrow, and OK. Do this two
times! OUP should appear.
To navigate through the menus refer to System LED Function Outline
along with the Navigational Flowchart.
Eagle Comtronics Inc. Customer Support •1-800-448-7474 3!
!

!
SYSTEM LED FUNCTION
!"#$%#$!&'$$()*+!,(-!.#+/!0#$$1)!
!"#!
!"#$%&#'$&($")&(*")*++,-&.$$&/*")*+&01$%*#23"&14-56&!"#!!"#$%&'())*(+,'
!!"#$%&$'()%#)$(*%)+%(,-
!
!"#!
!"#$$%&'%()**+,%*+%#,*#"%!"#$%&'()*+%,-*..%/0%1233(4%3(%*43*-%(-%5*-678%9:;44*<%42'1*-%(4%
!"#$%&'()*+,$-.#''$/0$12!!34$*5*&4$!3$*66#''$1)&47&45$8"*44#)$9:;:<:=',$>'#$!"#$>-$3.$</?@$
!"##$%&'#$'()*%+,'$-'&,#'#),'."#/"#'0)*%%,1'2"3!,-'4)51,'#),'678797:&'*-,'!15%;5%+<'=-,&&'
!"#$%#&$%'!!"#$%&'()'(*$+,-,.,/0$1(2$34(5'67$48!98!$3"1((#&$(87%#6$0#&#3!'4(,$
!"#$%&"%'()*+,-./,01)),#%,21$3)4*%2,1',(5%,-"(3"(,21$3)4*6,78'(1'"%,(8,'%9(,$(%36!
!"#!
!"#$%#&'()))*#+',%#,$-',."(',/*012,"3,*&$4&$,5'6'5,."('),73'88,*9,:&$$"#,$",8'',"3,+-'+;,
!"#$%&'()*+#%$,-!(-!$)#.#)$/#!0##1$2345$!,$367$%89.:;$<"#$=*>!,?+$%#=*-)!$&'$67;$@?#''$AB$
!"#$%%&''#()'*+$,-'#.+)/0)/1#234353-'3#6'&#!7&#68#"9#5":/#.;!!"/'#!"#%7$/1&#"!"#$%"%&$"'$($)"
!"#$%&#'()"*)"+#,)-.(/01#23&--#45#$!#-$!.#$%&#'()"*)"+#6171819-#/",#:!";)3<#$%&#4=$.=$#(&>&(#
!"#"$%&'()*+,-!".,"(%#/0*12345*2'(!%"##6%&'(*7&##*-"*8&!9#6/"8*&(*%:"*3,%9,%*;)<)=)>!*8&!9#6/)*
!"#$%#&'($"($)'(#'*$(+$',-!
!"#!
!"#$%#&'()))*+,'--*.!"#$%%&'"%&"('%()"*+,-."/&0("&)"1&'2%(334%5&'6"7)(22",!"#$%%&'"4845'"
!"#$%!$&#"&#'$&()*#+"%,!$--.!("%#./01,!2$%!#2"/$#3456#"&#6789#:&$,,#;<#!"#.==$,,#>-(%?(%@#
!"#"$"%&"'(&)'*+)'(,'-.'$-/0'12**-0&'*-'3+405)'-.'&)*'*+)'6-0&*)774*8-0'-0'*+)'17809805'
!"#$%&'()!"#$$%&'%()%$()*%(+#%,-./0./1%2343536$%7/8%9)/:.";%(+#%<)/$(#--7(.)/3%<)/(./=#%()%(+#%
!"#$%&$"'(!
!!!!!!
!"#$%&#$!'$()$*(+,$-.%%(,"$%($/&0,1#$()$"#%$%&#$%&#$!!!"#!!"!"#!!"##$%&'($)*($+,('"-.%$
!"#$"%&'())*#+'&"#,&!"!!"##$%&'%(#$)*($+,(-"./0$1&'/&#$0())"'20$3!"#$%&'#($!)'*+#,-*%../0#
!"#$%&''$()$*+,"'')-$(.+/$0"$01)$234$-&*5'.!$*)00&678!
Eagle Comtronics Inc. Customer Support •1-800-448-7474 4!
!"#!2!'()*()!
$%&'2!+,#-(#./0!123&..#4!5(67#,8!
'!"(3!'()*()!9#$#4!
!%!)!2!2:.;)#44&)<:.!
'*%#''3!=>2?!

!
4.!
!"# !
!"#$%&'(")(**+&#,**&!"#!!""#!$%&!"#$$%&'%("")*%+*,-#%.)"%/!01%23#4%56%7&++)4%+)%#4+#"%89!1!
!"#$%&$
!"#$%&$
!"#$%
!"#$!
!"#!!"!"#$%&'()!"#$%&&"'(")*"&%%"&)+),&"*-!!"#!!"#!"!"#$%&&"'(!!"!#$%&'%()&%#$&'%*+#$,#$"%
!"#"!"#$%&'"#()'#*+'#(,#%-#!%./#01**%/)#*%#2+3/4'#%-#)'*#*%#5')#%-#/%"#6')#$'3/)#7*#7)#7/#
!"#$%&'()*%+'%&),-.%./,/01%&'()2%$3)..%45%/'%1'-/0-6)%/'%.)1/0'-%7$82%$9),.)%:'%/'%/;)%
!"3!"#$%&'()*+$*,$(-&$'-./($(*$%&(01$(-&$23#3$!""#$%%&'(&)*+*',&-."$/&01)&2.#&3456&-."$&
!"##$%&$'()*+')",'##-$'.."/0&1$'0$2343$'115&..$!")6$5&.7&,)$)*$-*(5$0&)!*58$5*()&53$29$-*($
!"#"$%"&'()*'+),'-,!%'.!!/0('&/11"2"(%'34'.&&2"!!"!'1)2'-)2"'%5.(')("'-)&,#.%)26'
!"#"$%&$'()$(*)+,(-"."/0&)$-()1(*"-(),($)(!"#$%#&'($"($)'(#'*$(+%#'(,-.("/('+0'(1"($"($)'(2"3
!"#$%&$'()(*+$,%-.$'.+(*%/$%0$(1*'$+1)&(2$&.'3.+(*4.567!
!"#!
!"#$%#&%'"(%)#*$'%+,*'%-)%'"(%./01%21%,33*($$%-*%2145%1*($$%67%'-%*(,3%'"(%)#*$'%&89:(*%-)%'"(%
!"#$%&'()*+$,--*&../$"*&..$01$')$2)%'3%4&$')$'5&$!"#$%&'()*+'$,'+-"'./')&&*"!!'$*'./01!
!"#!
!"#$%#$%&"'%$'()*+%,-.&%)/%&"'%0123%43%-++.'$$%).%4356%3.'$$%78%&)%.'-+%&"'%$'()*+%*9:;'.%
!"#$%&#'()#*&$+!,-#.//,&001#(,&00#23#$!#4!*$5*6&#$!#$%&#$%5,/#7.,$#!"#$%&#'(#.//,&00#!,#'(81!
!"#!
!"#$%#$%&"'%&"#()%*+(&%,-!!"#$%&$'(()#**$+)$%&,-$&)#**$./$!+$)#'($!"#$!"0)($1234#)$+5$!"#$%&,$
!"#$%&'()**&"++,(-&"++(./(#%(0%!#1!2"(#%(#3"(4%2&#3(5)&#(%4(#3"(6-()**&"++(%&(6-7,!
!"#!
!"#$%&'$(")$*($+,'$-"#&+,$.%&+$"-$+,'$/0$%11&'22$"&$/034$0&'22$56$+"$&'%1$+,'$-"#&+,$(#78'&$
!"#$%&#!"#$%&'()*+$,--*&../$"*&..$01$23%3.4$*&,-3%5$'4&$2)6*$7,*'.$)2$'4&$!"$%&'()*+$,--*&..$
!"#"$#"!%&'%#("%)*!+,-#*.%*.%/.*$"00*.1%234-,,'5%'*+%63,,%&"%&-$7%#*%89:%)*!"1!
!"#$%&!
!"#$%&'!
!"#$%&'(&)*&+$,$-#$.&/0.&*/1$.&23&4%$**)05&#6$&(7&28##90:&!,,&9"&398%&;9.8,!"#$%&'())&*+&
!"#$%&'()*!"+,$*)($%($-*(.$"$/#(01("))&*..(%!((234526752526758(0!('%+(-"9*(:%&*($-";(%;*(
!"#$%&'"()*"$)+,%%)-.)(./$,(.#)'")01&23.),'),2'")'1.)0"((.0')(&23.)4("!567896:;9696)'")
!"#$!%&$!$#'()*+,-.*-./*0/-*1234*56*7#''$#''$#''$8)*924/*3:;/*-.2-!!"#$%&#'()#&*!+,#'#
!"#$%&'()')(*$+)'$&,$'-(*'.('/($'&,0+'/($',!!#1/+.',/-'.*23#%,$+',..)+!!+!'$(',0(#.',/-'
!"#$%&!'()*+,-((*./*'"*#-0'*(-!'&"#*1+2)!
!"#!
!"#$%#&%'"(%)#*$'%+,*'%-)%'"(%.!/!01%02%,33*($$%-*%0245%2*($$#&6%78%-&(%'#9(%'-%*(,3%'"(%)#*$'%
!"#$%&'!"#$%&#'()#*&$+!,-#.//,&00#$%&*#12#.#0&3!*/#$45&#$!#5.-&#3%.*6&07#80&#$%&#8(#!,#
!"#$%&'(("$)%("%*+,-%./+$0-)1%!!"#$$%&'(&)*&+,*-../&)*&".0)&1.-)!*"&234&5&6*).7&8$!"9!":&
!""#$%&'#(&)#&*!+,&-.!/0,%1!
!"#!
!"#$%#&%'"(%$()*&+%,-.'%*/%'"(%0!1!23%24%-++.($$%*.%2456%4.($$#&7%89%*&(%'#:(%'*%.(-+%'"(%
!"#$%&'%()*"+'$,'-."'/01'%"-2$+3'4&&+"!!'-."%'56'4'!"#$%&'-7)"'-$')43"'#.4%8"!9':!"'
!"#$%&$'($)'*+$,-!!'+.$!'$/01#$2"0+3#.4$!!"#$$%&'(&)*&+,*-../&)*&".0)&1.-)!*"&234&!"#$%&'"
!"#$%#$&'("")*+',)-'.)'/(%0'12($&0+3!
!"#!
!"#$%#&%'"(%'"#)*%+,)'%-.%'"(%/!0!12%13%,**)($$%-)%1345%3)($$#&6%78%-&(%'#9(%'-%)(,*%'"(%'"#)*%
!"#$%&'()'*+%',-.'!%*/(&0'122&%33'*+%!'45'1'3%6(!2'*7#%'*('#10%'6+1!8%39'(&':3%'*+%':-'
!"#$!%&#'())!&*#)!#+,-.#!"#$%&'()!
!"#$$%&'(&)*&+,*-../&)*&".0)&1.-)!*"&234&5&6*).7&8$!"9!":&
!""#$%&'#(&)#&*!+,&-.!/0,%1!
!"#!
!"#$%#&%'"(%)*+,'"%-.,'%*)%'"(%/!0!12%13%.44,($$%*,%1356%3,($$#&7%89%*&(%'#:(%'*%,(.4%'"(%)#,$'%
!"#$%&'()'*+%',-.'!%*/(&0'122&%33'*+%!'45'1'3%6(!2'*7#%'*('!"#$%&'"()$*+%,*$%-'$%,.%/0%
!"#$%&'(("$)%("%*+,$-.%"/%).(%("%!!"#!!"#$%&'"()*+,*+-".*/0)12"1))$3/"2$4"%$"51,&"671+-&/!
!"#$"%!
!"#$%#$%&"'%(#)*+%$',&#-)%-(%.-/0%)'1%23%*440'$$%.-/%"*5'%')&'0'4%6*)/*++.7%8$'%&"'%83%-0%
!"#$%&'(("$)%("%*+,$-.%"/%).(%("%!!!"#!!"#"$%&'(")*"(&+%"&',"'"$%&'(")*"-&'-%."&'#"
!"#$%&'()(*+$#,,-.(/0&''(12(34(!4$5+06(3"&('#7&(40(!#$!&,(3"&(!"#$%&'(540(3"&(89(#::0&''))!
Eagle Comtronics Inc. Customer Support •1-800-448-7474 5!
*%# 5!678.!
)!'*%#'5!&9:948!

!
&'$#%!,(-!.#+/!;#$$1)!
4)%#$!8/-))'<!&'$!=%!,(-!%#+/!0#$$1)!
!"#!
!"#$%&#'$&($")&!"#$"%%&!"!"#!!"#$%&'())*(+,'-**'.(/$(%'0)*+(12#/')3,'45!"#$%&'"()$**"
!"#$%&'($)**+,$+-#$!./#$!+$#-!#*$!"#!!"#$%&"'&('$))&*+,-&.''"/&0/"&01!$)&0"&$20$'&
!"#$!"#$!"!!"#$%&'$!()$%*+$,&-./0!!!
CH1 or
CH2
The Display shows CH1 or CH2 depending upon which input port you have chosen to setup.
Press OK button to continue to the typ or type section of the input signal to be demodulated.
typ
The Display shows typ for the type of input modulation. Pressing Ok one time to read if the
input signal is in AtSfor ATSC or 83b for J83b, then press OK a second time to make
changes, Use the UP or Down buttons to set 83b or AtS Note: Blinking display allows you
to make changes from ATSC to J83b. Press OK to continue to next part FCY or Frequency.
Please note that all modulators will be Factory defaulted to ATSC.
FCY
The Display shows FCY for the Channel Frequency. Pressing Ok one time to read the
Channel number, Press OK a second time to make changes to the Channel number, !"#$%&#$
!"#$%#&$'(#)*++$(,#+$#-./(01#+.1#-./((12#(*3)1%4#56(/2278#"%1,,#9:#+$#!!!!"#$%&#$!'$()$
!"#$%&'(("$)%("%*+,$-.%"/%).(%!!"#!!"!!"#$%&'(&)#*"&#$+&!!"#!"#$%#&'!&()#&*'!+(",##
!"#$%%&'()*+,,(-.(/0112#(1!"#!$%&'(")*+"!"#$%&'()*+,&-).#!,+/0)1&2#34,')2+/)5678)./&93&$!0)
!"#$%#&'#()*#$%+,#-./#012#34'5#/2(-670#(*2862.9:#!"#$%#;<#()*#$%+=
23 or 74
The display shows 23 for ATSC factory default CH1 mode and shows 74 for J83b factory
default CH1 mode. Press OK a second time to make changes, Use the UP or Down buttons
to make changes. Note: Blinking display allows you to make changes to a desired input RF
channel. Finally, Pressing Ok will display CON or Constellation. Continue to next step.
CON
The display shows CON meaning the constellation. Pressing Ok one time to read if the input
constellation is 256 or 64, for J83b Input. Press OK a second time to make changes, Use the
UP or Down buttons to change from 256 to 64. !"#$%%&'()*+,,(-.(/0112#(12(32#4"*5(16+(
!"#$%&'()*+)#$,-!!!!!"#$%&'(&)#*"&#$+&!!!"#$%&'(&)#$)"*&)+#$,"%-&./"%%0$,&12&30**&%)/(**&4(5&
!"#$%&'%()*+% Note: Blinking display allows you to make changes from ATSC to J83b.
OUP
We have scrolled back to the beginning of manual operations mode.
Eagle Comtronics Inc. Customer Support •1-800-448-7474 6
!
%+,!2!@.*()!23&..#4!A:,!?:,)!BC!
!
%*-!2!@.*()!23&..#4!+:,!*:,)!BD!
!
./0!3!!E0*#!:A!<.*()!1<F#F!GEH2!'++!G@"!:,!IGJ!KL%78!
!
1234'5123'>?-@A'()%#$!2"#-(<,#;!/:.;)#44&)<:.!;#)(*!
!
6.74'687%!>"BB!:(CA!()%#$3!=:#;!.:)!,#-(<,#!/:.;)#44&)<:.!;#)(*!
!
$%&!2!+,#-(#./0!123&..#4!5(67#,8!
!
%!)'3!
2:.;)#44&)<:.
!

!
Eagle Comtronics Inc. Customer Support •1-800-448-7474 7!

!
)!89: 8+;'$<=.>?/'@;A<BC.'7;..DEF'DG'@*%#'D!91!E/-)*'!$/(+!+'$$()*!$1!7868H%F!C'B'C!$1!%-*'!GH''''''!'
!!!!!!!!!
!!''''''''''!
!
!
'''''''''''''''789#',3!!6'E(I'!J'-$/'C!K1#C!E1))'E$(1)!J(<<!0'!
&9:948!1C!678.!-)I!@-L'!$/'!E1))'E$(1)!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!-E1CI()*!$1!I(-*C-@!11aF8!
!!!!!!!!!!!!!!!!M!"#$%&!G!;M<)/3!<;!,#-(<,#N!<.!:,N#,!):!(;#!'()*!N!
!!!!!!!!!!!!!!!!!'
!
!!!!!!!!!!!!!!!!!!!!!!!!!!
hhhhhhhhhhhhhh
!!!!!!!!!O!P<.N:M;!QR!!!!!
789#'-I''")!K1#C!.8F!*1!$1'%>E.?>C'0<E;CJ');.K>?L'<EM'
''''''''''''''''''''''''''HE.;?E;.J');.K>?L'<EM'7+<?DEF'%;E.;?'
!
789#'2- Click on “Local area network” and select Properties
!!!!!789#'NI'&'<'E$!-)I!E<(EL!1)'N'8%#OH#PN'$/')!E<(EL!1)!'#?>0;?.D;G'
''''''''''789#'QI'&'<'E$!@1I'O'@*%#'1C'7868H%R'"#A#,!):!N<&S,&6''1CF/8'
'''''''''''''''''A:,!+$,$-)!.#'%&!T.)#,!H(7.#)!6&;U!!/00!1!/00!1!/00!1!2!
!!!!!!!!!!!!!!!!!A:,!+$,$-)!.#'%!#.)#,!N#A&(4)!@?!&N,#;;!!34/135613178!8!8!
!!!!!!!!!!7P)$'C!&.0!.(67#,!A,:6!39/0:!=:!.:)!(;#!VW%W:,!CXLF!E3<;!M<44!!
!!!!!!!!!!!!!/&(;#!/:.A4</)F!
!!!!!!!!!!!)!89:'4B!K1#!-C'!#+()*'@*%#S'$/'!+J($E/!J(<<!-#$1@-$(E<K!!
!!!!!!!!!!!!!!!!!!!!!!-+(*)!$/'+'!)#@0'C+D!
!
'''''''''''789#'TI'8<(EL!1)'!U'$/')!E<1+'D!
!!!!!!!!!!!!!!!!
hhhhhhhhhhhhhhhhhhhhh!
hhhhhhhhhhhh !
Eagle Comtronics Inc. Customer Support •1-800-448-7474 8!
Web Interface/ Remote Operation'
!
1a.
C7F!
C/F!

!
Ethernet
connection
The web browser allows the user to fully configure the SB-HDQP unit
via an Ethernet connection and a web browser.
A. Connect the PC to the LAN port of the SB-HDQP-2130 unit.
B. The configuration process must be made acording to
instructions on page 8 of this manual. You will be able to access the
unit from any PC.
C. Launch the web browser. Enter the IP address in the address bar
and then hit Enter. “System Login” will appear. Enter the default
password to Login.
System Login
Enter the default password ‘1234’ to Login.
Note: Password can be changed after logged in under System parameters tab.
RF Parameters
User can edit the parameters such as Country, Frequency, Output Level etc.
LAUNCH WEB BROWSER
Eagle Comtronics Inc. Customer Support •1-800-448-7474 9!

!
Stream Parameters
User can edit the Swap VCN (Virtual Channel Name) in ‘Stream parameters’.
Note: Some TV models might required a complete channel re-scan in order to see the change.
System Parameters
User can reset the system, set password or retrieve inventory in ‘System parameters’.
Eagle Comtronics Inc. Customer Support •1-800-448-7474 10
!

!
Ch # Center Freq. Ch# Center Freq. Ch# Center Freq Ch# Center Freq Ch# Center Freq
2
57
29
255
56
417
83
579
110
711
3
63
30
261
57
423
84
585
111
717
4
69
31
267
58
429
85
591
112
723
5
79
32
273
59
435
86
597
113
729
6
85
33
279
60
441
87
603
114
735
7
177
34
285
61
447
88
609
115
741
8
183
35
291
62
453
89
615
116
747
9
189
36
297
63
459
90
621
117
753
10
195
37
303
64
465
91
627
118
759
11
201
38
309
65
471
92
633
119
765
12
207
39
315
66
477
93
639
120
771
13
213
40
321
67
483
94
645
121
777
14
123
41
327
68
489
95
93
122
783
15
129
42
333
69
495
96
99
123
789
16
135
43
339
70
501
97
105
124
795
17
141
44
345
71
507
98
111
125
801
18
147
45
351
72
513
99
117
126
807
19
153
46
357
73
519
100
651
127
813
20
159
47
363
74
525
101
657
128
819
21
165
48
369
75
531
102
663
129
825
22
171
49
375
76
537
103
669
130
831
23
219
50
381
77
543
104
675
131
837
24
225
51
387
78
549
105
681
132
843
25
231
52
393
79
555
106
687
133
849
26
237
53
399
80
561
107
693
134
855
27
243
54
405
81
567
108
699
28
249
55
411
82
573
109
705
Ch # Center Freq. Ch# Center Freq. Ch# Center Freq Ch# Center Freq Ch# Center Freq
257 16 485 30 569 44 653 58 737
363 17 491 31 575 45 659 59 743
469 18 497 32 581 46 665 60 749
579 19 503 33 587 47 671 61 755
685 20 509 34 593 48 677 62 761
7177 21 515 35 599 49 683 63 767
8183 22 512 36 605 50 689 64 773
9189 23 527 37 611 51 695 65 779
10 195 24 533 38 617 52 701 66 785
11 201 25 539 39 623 53 707 67 791
12 207 26 545 40 629 54 713 68 797
13 213 27 551 41 635 55 719 69 803
14 473 28 557 42 641 56 725
15 479 29 563 43 647 57 731 r3a
6##9)@HV'W'X'@8Y'%+<EE;C'8<3C;'(DG.'A>?'687%'Z6H[\'
6##9)@HV'6'X'"R7R6R'%+<EE;C'$?;]B;E=/'6GGDFE^;E.G'Z%6W(9\'
Eagle Comtronics Inc. Customer Support •1-800-448-7474 11!

Eagle Comtronics Inc • 7665 Henry Clay Blvd. • Liverpool, NY 1 088
www.eaglecomtronics.com •e-mail: [email protected]
1.800.448.7474