StarTech.com USB3S2ESATA User manual

SATA Hard Drive Adapter
USB 3.0 to eSATA Adapter
USB3S2ESATA
Instruction Manual
Manual Revision:01/10/2011
For the most up-to-date information, please visit www.startech.com

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes
only and do not represent an endorsement of a product or service by StarTech.
com, or an endorsement of the product(s) to which this manual applies by the
third-party company in question. Regardless of any direct acknowledgement
elsewhere in the body of this document, StarTech.com hereby acknowledges that
all trademarks, registered trademarks, service marks, and other protected names
and/or symbols contained in this manual and related documents are the property
of their respective holders.

i
Table of Contents
Introduction.............................................................. 1
Packaging Contents............................................................. 1
System Requirements ......................................................... 1
Installation................................................................ 2
Hardware Installation........................................................... 2
Hardware Removal.............................................................. 2
Specifications........................................................... 3
Technical Support.................................................... 4
Warranty Information............................................... 4

1
Introduction
The USB3S2ESATA USB 3.0 to eSATA Adapter Cable allows for
connecting an external SATA (eSATA) device or enclosure to a host
computer through USB 3.0 in a single convenient package. Integrated USB
3.0 and eSATA cables and no external power source or driver installation
required, means a simple and hassle-free installation. No assembly
required or having to search for the right cable.
With support for SuperSpeed USB 3.0 connectivity at transfer rates up to 5
Gbps (10 times faster than USB 2.0) and backwards compatible with USB
2.0, this adapter provides a fast and easy-to-use Plug-and-Play experience
for home, office or laptop users alike. Compatible with any type of single
drive/volume eSATA device, this versatile adapter is backed by a StarTech.
com 2-year warranty and free lifetime technical support.
Packaging Contents
• 1 x USB 3.0 to eSATA adapter
• 1 x Instruction Manual
System Requirements
• USB enabled computer system with available USB type A port
• Microsoft®Windows®2000/XP/Server 2003/Vista/Server 2008 R2/7
(32/64-bit), or Apple®Mac OS®10.2 ~ 10.6, or Linux®
*actual product may vary from photos

2
Installation
WARNING! Hard drives and storage enclosures require careful handling,
especially when being transported. If you are not careful with your hard
disk, lost data may result. Always handle your hard drive and storage
device with caution. Be sure that you are properly grounded by wearing an
anti-static strap when handling computer components or discharge yourself
of any static electricity build-up by touching a large grounded metal surface
(such as the computer case) for several seconds.
Hardware Installation
1. Connect the eSATA end of the adapter cable into an eSATA port on the
external storage device, while it is powered off.
NOTE: Port Multiplier support is not available, so only a single disk/volume
from the eSATA device will be detected.
2. Turn on the external storage device.
3. Connect the USB end to an available USB port on the host computer.
The adapter will operate at the native speed of the USB port (i.e. USB
2.0 port: 480 Mbps, USB 3.0 port: 5 Gbps).
NOTE: If the eSATA port on the host computer supports Hot-Plugging /
Plug-and-Play operation, the computer can be running when the cable is
plugged in. Otherwise connect the cable before turning the computer on.
4. The computer system will automatically detect the storage device and
install it. No additional driver installation is required for the adapter
cable.
5. Once successfully installed, the Link LED on the adapter will light up.
The external storage device is now ready for use.
Hardware Removal
Stop the external storage device through the operating system by either
unmounting the storage volume (Mac OS) or stopping the USB device
(Windows).
Once the storage device has been stopped, it can be safely turned off or
the adapter cable disconnected.

3
Specications
Host Interface USB 3.0 revision 1.0
Chipset ID LucidPort USB300
Connectors 1 x USB 3.0 type A male
1 x 7-pin eSATA female
LEDs 1 x Link/Activity
Compliant Standards SATA revision 2.0
Maximum Data Transfer Rate USB 3.0: 5 Gbps
eSATA: 3 Gbps
Port Multiplier Support No
Operating Temperature 0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 5% ~ 85% RH
Cable Length USB: 1m / 3.3ft
eSATA: 30cm / 1ft
Weight 77g
Compatible Operating
Systems
Windows 2000/XP/Server
2003/Vista/Server 2008 R2/7
(32/64-bit),
Mac OS 10.2 ~ 10.6, Linux
NOTE: If used with the Apple Mac OS operating system, this device
will function in USB 2.0 mode only

4
Technical Support
StarTech.com’s lifetime technical support is an integral part of our
commitment to provide industry-leading solutions. If you ever need
help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and
downloads.
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in
materials and workmanship for the periods noted, following the initial
date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion.
The warranty covers parts and labor costs only. StarTech.com does
not warrant its products from defects or damages arising from misuse,
abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.
com USA LLP (or their officers, directors, employees or agents) for
any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of profits, loss of business, or any
pecuniary loss, arising out of or related to the use of the product exceed
the actual price paid for the product. Some states do not allow the
exclusion or limitation of incidental or consequential damages. If such
laws apply, the limitations or exclusions contained in this statement
may not apply to you.

StarTech.com has been making “hard-to-find easy” since 1985,
providing high quality solutions to a diverse IT and A/V customer
base that spans many channels, including government,
education and industrial facilities to name just a few. We offer
an unmatched selection of computer parts, cables, A/V products,
KVM and Server Management solutions, serving a worldwide
market through our locations in the United States, Canada, the
United Kingdom and Taiwan.
Visit www.startech.com today for complete information about
all our products and to access exclusive interactive tools such as
the Cable Finder, Parts Finder and the KVM Reference Guide.