StarTech.com WIFI2HDMC User manual

Manual Revision: 10/08/2013
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
WIFI2HDMC / WIFI2HDMCGE
Wireless Display Adapter for
Mobile Devices
*actual product may vary from photos

Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual
1
Table of Contents
Introduction............................................................................................2
Packaging Contents ................................................................................................................................. 2
System Requirements.............................................................................................................................. 2
Preparing Your Site ................................................................................3
Hardware Installation .............................................................................................................................. 3
Software Operation / Installation........................................................................................................ 4
Technical Support ..................................................................................8
Warranty Information............................................................................8

Instruction Manual
2
Introduction
Packaging Contents
• 1x Wireless Display Adapter
• 1x Universal Power Adapter (NA/UK/EU)
• 1x USB Cable to Power Adapter Port (optional for USB Power source)
• 1x Software Installation Disc
• 1x Quick Installation Guide
System Requirements
• HDMI enabled display device (i.e. television, projector)
• 802.11n/g Wireless enabled video source device (i.e. Smartphone, computer)
• HDMI cable
• Available AC electrical outlet or USB power source

Instruction Manual
3
Preparing Your Site
1. Determine where the display will be located and place/ mount the
display appropriately.
NOTE: The maximum distance of the display adapter is limited to the distance of your
802.11n/g Wireless network device. If the wireless signal is obstructed by walls, or other
interference the signal quality and maximum distance will likely be reduced.
Ensure the Receiver Unit is situated near an available AC electrical outlet.
Hardware Installation
1. Connect an HDMI video cable from the HDMI out port on the Wireless Video
Adapter to the HDMI in port on the HDMI enabled display device.
2. Connect the power adapter from an available AC outlet to the power adapter port
on the Wireless Video Adapter.
or
Connect the USB to power cable from an available USB power source to the power
adapter port on the Wireless Video Adapter.
3. Press the Power button to the in position to turn on the device, the Power LED will
be activated.

Instruction Manual
4
Software Operation / Installation
Initial Software Operation
1. Once Installation has completed, and the device has been turned on, the menu
below will appear on your HDMI enabled display device, with an IP address listed at
the bottom. By default the IP address will be:
http://192.168.59.254/remote
2. Using a WIFI enabled device with web browser, such as a computer or SmartPhone.
Connect to the Wireless Video Adapter by browsing for available networks and
connecting to the WIFI2HDMC.
NOTE: By default the SSID for the device is WIFI2HDMC and there is no security
key. Please review the manual for WIFI enabled device for specic details regarding
connecting to a wireless network.
3. Once you have connected to the device, open your web browser visit the Setup IP
address listed on the display.
NOTE: By default the Setup IP address is: http://192.168.59.254/remote

Instruction Manual
5
4. This will display the virtual remote control. Using the remote control you can
operate the user interface displayed on your display.
The virtual Remote control allows for advanced device operation. Download the full
product Manual at StarTech.com for advanced operation.
Connect a Miracast Enabled Mobile Device
NOTE: Exact steps regarding Miracast setup will vary from device to device. Please
review the documentation included with your SmartPhone or tablet for steps specic
instructions.
1. Press the Mode button on the Wireless Video Adapter repeatedly until you see the
Wi-Fi Miracast screen shown on your display.

Instruction Manual
6
2. Open your mobile settings page.
3. On the Settings browse to Display->Wireless Display, or Media Output, or All Share
Cast depending on your device.
NOTE: Other terminology may be used depending on your device.
4. By default the Wireless Video device will be listed as the MAC address shown on the
HDMI display. Tap this device to connect.
5. The video from your Miracast enabled mobile device will now be shown on your
video display.
Intel® WiDi Operation Wirelessly Share Your PC Screen
1. Press the Mode button on the Wireless Video Adapter repeatedly until you see the
Wi-Fi Miracast mode shown on your display.

Instruction Manual
7
2. Open the WiDi software included with your Wi-Di enabled computer system.
3. The adapter will be listed under detected adapters.
4. Select the adapter and click connect.
5. Your computer screen will now be shared wirelessly on the display.

Instruction Manual
8
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.