StarTech.com USB32HDEH User manual

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 24, 2019 2:12 PM
Product Diagram (USB32HDEH)
Component Function
1HDMI Port 1 • Used to connect an HDMI Display Device to
the Video Adapter.
2USB 3.0 Pass Through
Port
• Used to connect a USB Device to the Video
Adapter.
3Integrated USB 3.0
Input Cable
• Used to connect the Video Adapter to a Host
Computer.
Requirements
For the latest requirements, please visit www.startech.com/USB32HDEH
• One HDMI® display with cabling
• A computer system with an available USB 3.0 port
• Operating System:
• Windows® 10, 8.1, 8 or 7
Package Contents
• USB 3.0 to HDMI Adapter x 1
• HDMI to DVI Adapter x 1
• Software CD x 1
• Quick-Start Guide x 1
USB 3.0 to HDMI® Video Adapter with USB Hub Port
Installation
Notes: You may need to restart your computer during the software installation
process. Be sure to save any unsaved material before you install the software.
Ensure the Video Adapter is not connected to your computer. Download the latest
drivers from the www.StarTech.com/USB32HDEH.
1. The software will be compressed in a .zip folder. Extract the contents of the folder
to a location on your computer that’s easy to access, such as your Desktop or
Downloads folder.
2. Launch the Setup(.exe) le.
3. Follow the on-screen prompts to complete the installation.
4. Connect an HDMI Cable to the HDMI Output Port on the Video Adapter and to an
HDMI Display Device.
5. Once the Host Computer has restarted, connect the Integrated USB 3.0 Input
Cable to a USB 3.0 port on the Host Computer.
Notes: If connecting multiple USB video adapters or docking stations to a single
computer:
The Video Adapter uses a Trigger family chipset. If you’re connecting this device to a
computer along with additional USB video adapters or docking stations, avoid using
devices with dierent family chipsets, such as DisplayLink® or Fresco Logic®.
To connect multiple USB display adapters to the same computer, you don’t need to
install any additional drivers. Repeat steps 4 - 5 for each video adapter.
You may be prompted to restart your computer during the installation of each video
adapter.
Conguring the Video Adapter Settings
Video Conguration
1. Right-click on the Video Adapter icon on your Windows System Tray (next to
clock).
2. Click on Screen Resolution.
3. Select the monitor you want to change the settings on.
4. Adjust the screen resolution and orientation as needed.
1
2
3

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
• If product has an exposed circuit board, do not touch the product under power.
Mesures de sécurité
• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
Misure di sicurezza
• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
Supported Resolutions
Wide Screen Standard Screen
Aspect Ratio Resolution Aspect Ratio Resolution
16:10 1920 x 1200 4:3 1600x1200
16:9 1920 x 1080 4:3 1400x1050
16:10 1680 x 1050 5:4 1280x1024
16:9 1600 x 900 4:3 1280x960
16:10 1440 x 900 4:3 1152x864
16:9 1360 x 768 4:3 1024x768
16:10 1280 x 800 4:3 800x600
15:9 1280 x 768
16:9 1280 x 720
Audio Conguration
Audio will only output over HDMI, when the adapter is initially connected. To playback
audio from another audio device instead of HDMI, such as your computer speakers,
you must manually change the default audio device from the Hardware and Sound
settings in the Control Panel.
1. Browse to the Windows Control Panel.
2. Click on Hardware and Sound.
3. Click on Manage audio devices.
4. Select your desired audio device from the list and click the Set Default button.
USB HUB Installation (Optional)
This device includes 1 USB 3.0 Pass Through Port to replace the port taken up by the
device.
Note: If the Video Adapter is connected to a USB 2.0 host port, the hub will only
operate at USB 2.0 speeds.
1. Ensure the Hardware Installation steps have been completed. USB Hub drivers will
install as part of the installation when the device is connected.
2. Connect the USB A Cable from a USB Device to the USB 3.0 Pass Through Port on
the Video Adapter.
3. Follow any installation instructions for the connected USB Device.