StarTech.com VGA2HDMIPRO User manual

Manual Revision: 02/17/2012
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
VGA2HDMIPRO
Professional VGA to HDMI Video Converter

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names
and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur
these references are for illustrative purposes only and do not represent an endorsement of a product
or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the
third-party company in question. Regardless of any direct acknowledgement elsewhere in the body
of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks,
service marks, and other protected names and/or symbols contained in this manual and related
documents are the property of their respective holders.

Instruction Manual i
Table of Contents
Introduction .......................................................................................................................................................1
Features...........................................................................................................................................................1
Package Contents.....................................................................................................................................1
Operation Controls and Functions.......................................................................................................2
Front Panel ....................................................................................................................................................2
Rear Panel ......................................................................................................................................................3
Connection and Installation ....................................................................................................................3
OSD Operation..................................................................................................................................................4
Reset Function...................................................................................................................................................5
Specications.....................................................................................................................................................6
General Specications ...........................................................................................................................6
Supported Resolutions..........................................................................................................................7
Technical Support...........................................................................................................................................8
Warranty Information....................................................................................................................................8

Instruction Manual 1
Introduction
Thank you for purchasing a StarTech.com Converge A/V VGA2HDMIPRO scaler/converter. This
convenient device oers a simple way to convert analog PC video and audio to HDMI or DVI-D,
providing the option to output audio through an HDMI or TosLink cable - making it the ideal
choice for use with DVI or HDMI video signals.
Featuring a convenient on-screen display menu and automatic native resolution detection,
the VGA2HDMIPRO VGA with Audio to HDMI Scaler/Converter is easy to setup and ensures
compatibility with most displays with support for input and output resolutions of up
1900x1200 / 1080p.
Features
• Automatically detects native resolution of the connected display
• HDMI 1.2, HDCP 1.1, and DVI 1.0 compliant
• Supports input of analog audio or digital audio
• Supports input resolutions up to 1080p (HDTV) and 1900 x 1200 (PC)
Package Contents
• 1 x VGA and Audio to HDMI Converter / Scaler
• 1 x Auto/Universal Switching Power Adapter
• 1 x Instruction Manual

Instruction Manual 2
Operation Controls and Functions
Front Panel
1. PC Input: Connect the D-Sub (15-pin) VGA PC input port to the DB15 VGA output port
of your source equipment.
2. Audio Input: Connect the 3.5mm jack input port to the analog audio port of your
source equipment.
3. TOSLink (Optical Fiber) Input: Connect the optical input port to the digital audio
output port of your source equipment.
4. Power: Plug the 5VDC power supply in to the unit and connect the adapter to an
available AC wall outlet.
1 2 34

Instruction Manual 3
Rear Panel
1. HDMI Output: Connect the HDMI output port to the HDMI input port of your display.
2. TOSLink (Optical Fiber) Output: Connect the optical output port to the digital audio input
port of your amplier.
3. Audio Output: Connect the PC 3.5mm jack output port to the analog audio input port
of your equipment.
4. Menu Button: Press the MENU button to bring up the OSD operation menu.
5. +/- Button:
a. At the rst tier of the OSD menu, use the + and – buttons to scroll through the
dierent settings.
b. Once the desired settings are selected, use the + and – buttons to toggle between
setting values.
Connection and Installation
51 2 3 4
Audio/Optical Audio/Optical
VGA D-Sub (15-pin) HDMI

Instruction Manual 4
OSD Operation
1st Tier Option 2nd Tier Option Adjustment
CONTRAST - 0 ~ 100 Contrast Level
BRIGHTNESS - 0 ~ 100 Brightness Level
FINETUNE
HUE 0 ~ 100 Hue Level
SATURATION 0 ~ 100 Saturation Level
SHARPNESS 0 ~ 100 Sharpness Level
EXIT Back to 1st Tier
COLOUR
RED 0 ~ 100 Red Colour Level
GREEN 0 ~ 100 Green Colour Level
BLUE 0 ~ 100 Blue Colour Level
EXIT Back to 1st Tier
SIZE - Full/Overscan/Underscan/Letterbox/
PanScan
OUTPUT -
NATIVE / VGA / SVGA / XGA
/ SXGA /UXGA / 480i / 480p/
720p@60Hz / 1080i@60Hz /
1080p@60Hz / 576i / 576p /
720p@50Hz / 1080i@50Hz /
1080p@50Hz / WXGA /
WSXGA / WUXGA

Instruction Manual 5
1st Tier Option 2nd Tier Option Adjustment
AUDIO - 3.5mm / Toslink (Optical)
OSD
HPOSITION 0 ~ 100 OSD Horizontal Position
VPOSITION 0 ~ 100 OSD Vertical Position
TIMER 0 ~ 100 OSD Existing Time (sec.)
BACKGROUND 0 ~ 100 OSD Transparency Level
EXIT Back to 1st Tier
INFORMATION -
SOURCE (Input Interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
EXIT - Close OSD Menu
Reset Function
To reset the unit, press and hold the MENU button. Unplug the DC power supply from the unit,
then reinsert it. This will ensure that the unit is set back to its factory default settings, with the
output resolution set as NATIVE. This features can be useful when the output resolution is not
supported by the display device that is connected.

Instruction Manual 6
Specications
Specication VGA2HDMIPRO
Input Ports
1 x D-Sub 15-pin (VGA Connector)
1 x 3.5mm Jack
1 x TOSLink (optical ber)
Output Ports
1 x HDMI
1 x 3.5mm Jack
1 x TOSLink (optical ber)
Power Supply 5V/2.6A DC (US/EU Standards, CE/FCC/
UL certied)
Dimensions (mm) 154(D) x 100(W) x 25(H)
Weight (g) 340
Chassis Material Aluminum
Silk Skin Colour Silver
Operating Temperature Operating from 0°C ~ 48°C

Instruction Manual 7
Supported Resolutions
PC Input HDMI Output
PC SD/HD PC
480I/576I (NTSC/PAL)
480P/576P
720P@(50/60)
1080I@(50/60)
1080P@(50/60)
VGA@(60/72/75/85)
SVGA@(56/60/72/75/85)
XGA@(60/70/75/85)
SXGA@(60/75/85)
UXGA@60
WXGA@60(1280x800)
WSXGA@60(1680x1050)
WUXGA@60(1920x1200)

Instruction Manual 8
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commit-ment to provide
industry-leading solutions. If you ever need help with your product, visit www.startech.com/
support and access our comprehensive selection of online tools, documentation,
and downloads.
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for
the periods noted, following the initial date of purchase. During this period, the products may
be returned for repair, or replacement with equivalent products at our discretion. The warranty
covers parts and labor costs only. StarTech.com does not warrant its products from defects or
damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers,
directors, employees or agents) for any damages (whether direct or indirect, special, punitive,
incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss,
arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If
such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old
and new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they
need to go. Just talk to one of our tech advisors or visit our website. You’ll be
connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products
and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.