StarTech.com ET91000SM40 User manual

Gigabit Single Mode Media Converter (SC - 40km)
StarTech ID: ET91000SM40
Do you need to bridge networks over a high-speed fiber optic backbone? The ET91000SM40 is a
single-mode media converter that allows you to convert 1000Base-LX fiber optic signals into
Gigabit Ethernet at distances up to 40 km (25 miles). Operating at full Gigabit speeds end-to-end, this
media converter is the perfect way to create a high speed network.
Applications and Solutions
> Converts 1000Base-LX fiber optic signals to 1000Base-T Ethernet over single mode cable
Features
> Advanced features: Link-loss forwarding, loop-back test, remote monitor status, two frame
lengths
> Cost-effective way to extend/bridge networks using fiber cabling
> Easy to use and install
> Maximum Fiber Cable length of 40 Km
> Supports full or half-duplex operation
Specifications
> Color Beige

> Connector Types 2 - Fiber Optic SC Female
> Connector Types 1 - RJ45 Female
> Product Height 10.24 in [260 mm]
> Input Voltage 115 ~ 230 AC
> Product Length 19.29 in [490 mm]
> Output Current 1000 mA
> Output Voltage 12 DC
> Plug Type M
> Power Adapter Included Yes
> Center Tip Polarity Positive
> Carton Quantity 8
> Shipping (Package) Weight 1.59 lb [0.72 kg]
> Product Weight 24.36 oz [690 g]
> Product Width 15.75 in [40 cm]
> Duplex Mode Support Full or Half Duplex
> Crossover Support Auto-detect MDI and MDIX
> Advanced Features Link-loss forwarding, loop-back test, remote monitor status, two frame lengths
> Max. Data Transfer 2000 Mbits/sec. (full duplex mode)