StarTech.com VGA2HDMIPRO User manual

VGA2HDMIPRO
VGA with Audio to HDMI
Scaler Converter
Instruction Manual

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the receiver•
is connected.
Consult the dealer or an experienced radio/TV technician for help.•
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and
do not represent an endorsement of a product or service by StarTech.com, or an en-
dorsement of the product(s) to which this manual applies by the third-party company in
question. Regardless of any direct acknowledgement elsewhere in the body of this doc-
ument, StarTech.com hereby acknowledges that all trademarks, registered trademarks,
service marks, and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.

Instruction Manual
i
Instruction Manual
Table of Contents
Introduction .................................................................... 1
Features ......................................................................................1
Package Contents .......................................................................1
Operation Controls and Functions ................................ 2
Front Panel ..................................................................................2
Rear Panel...................................................................................3
Connection and Installation .......................................... 3
OSD Operation ................................................................ 4
Reset Function ................................................................ 5
Specifications.................................................................. 6
General Specifications.................................................................6
Supported Resolutions................................................................7
Technical Support........................................................... 8
Warranty Information...................................................... 8

Instruction Manual
1
Introduction
Thank you for purchasing a StarTech.com Converge A/V VGA2HDMIPRO
scaler/converter. This convenient device offers a simple way to convert
analog PC video and audio to HDMI or DVI-D, providing the option to out-
put audio through an HDMI or TosLink cable - making it the ideal choice
for use with DVI or HDMI video signals.
Featuring a convenient on-screen display menu and automatic native res-
olution detection, the VGA2HDMIPRO VGA with Audio to HDMI Scaler/
Converter is easy to setup and ensures compatibility with most displays
with support for input and output resolutions of up 1900x1200 / 1080p.
Features
Automatically detects native resolution of the connected display•
HDMI 1.2, HDCP 1.1, and DVI 1.0 compliant•
Supports input of analog audio or digital audio•
Supports input resolutions up to 1080p (HDTV) and 1900 x 1200 (PC)•
Package Contents
1 x VGA and Audio to HDMI Converter / Scaler•
1 x Auto/Universal Switching Power Adapter•
1 x Instruction Manual•

Instruction Manual
2
Operation Controls and Functions
Front Panel
PC Input:1. Connect the D-Sub (15-pin) VGA PC input port to the DB15
VGA output port of your source equipment.
Audio Input:2. Connect the 3.5mm jack input port to the analog audio
port of your source equipment.
TOSLink (Optical Fiber) Input:3. Connect the optical input port to the
digital audio output port of your source equipment.
Power:4. Plug the 5VDC power supply in to the unit and connect the
adapter to an available AC wall outlet.
1 2 34

Instruction Manual
3
Rear Panel
HDMI Output:1. Connect the HDMI output port to the HDMI input port of
your display.
TOSLink (Optical Fiber) Output:2. Connect the optical output port to
the digital audio input port of your amplifier.
Audio Output:3. Connect the PC 3.5mm jack output port to the analog
audio input port of your equipment.
Menu Button:4. Press the MENU button to bring up the OSD operation
menu.
+/- Button:5.
a. At the first tier of the OSD menu, use the + and – buttons to
scroll through the different settings.
b. Once the desired settings are selected, use the + and – buttons to
toggle between setting values.
Connection and Installation
51 2 3 4
Audio/Optical Audio/Optical
VGA D-Sub (15-pin) HDMI

Instruction Manual
4
OSD Operation
1st Tier Option 2nd Tier Option Adjustment
CONTRAST - 0 ~ 100 Contrast Level
BRIGHTNESS - 0 ~ 100 Brightness Level
FINETUNE
HUE 0 ~ 100 Hue Level
SATURATION 0 ~ 100 Saturation Level
SHARPNESS 0 ~ 100 Sharpness Level
EXIT Back to 1st Tier
COLOUR
RED 0 ~ 100 Red Colour Level
GREEN 0 ~ 100 Green Colour Level
BLUE 0 ~ 100 Blue Colour Level
EXIT Back to 1st Tier
SIZE - Full/Overscan/Underscan/Letterbox/
PanScan
OUTPUT -
NATIVE / VGA / SVGA / XGA
/ SXGA /UXGA / 480i / 480p/
720p@60Hz / 1080i@60Hz /
1080p@60Hz / 576i / 576p /
720p@50Hz / 1080i@50Hz /
1080p@50Hz / WXGA /
WSXGA / WUXGA
AUDIO - 3.5mm / Toslink (Optical)

Instruction Manual
5
1st Tier Option 2nd Tier Option Adjustment
OSD
HPOSITION 0 ~ 100 OSD Horizontal Position
VPOSITION 0 ~ 100 OSD Vertical Position
TIMER 0 ~ 100 OSD Existing Time (sec.)
BACKGROUND 0 ~ 100 OSD Transparency Level
EXIT Back to 1st Tier
INFORMATION -
SOURCE (Input Interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
EXIT - Close OSD Menu
Reset Function
To reset the unit, press and hold the MENU button. Unplug the DC power
supply from the unit, then reinsert it. This will ensure that the unit is
set back to its factory default settings, with the output resolution set as
NATIVE. This features can be useful when the output resolution is not
supported by the display device that is connected.

Instruction Manual
6
Specications
General Specications
Specification VGA2HDMIPRO
Input Ports
1 x D-Sub 15-pin (VGA Connector)
1 x 3.5mm Jack
1 x TOSLink (optical fiber)
Output Ports
1 x HDMI
1 x 3.5mm Jack
1 x TOSLink (optical fiber)
Power Supply 5V/2.6A DC (US/EU Standards, CE/
FCC/UL certified)
Dimensions (mm) 154(D) x 100(W) x 25(H)
Weight (g) 340
Chassis Material Aluminum
Silk Skin Colour Silver
Operating Temperature Operating from 0°C ~ 48°C

Instruction Manual
7
Supported Resolutions
PC Input HDMI Output
PC SD/HD PC
480I/576I (NTSC/PAL)
480P/576P
720P@(50/60)
1080I@(50/60)
1080P@(50/60)
VGA@(60/72/75/85)
SVGA@(56/60/72/75/85)
XGA@(60/70/75/85)
SXGA@(60/75/85)
UXGA@60
WXGA@60(1280x800)
WSXGA@60(1680x1050)
WUXGA@60(1920x1200)

Instruction Manual
8
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commit-
ment to provide industry-leading solutions. If you ever need help with your
product, visit www.startech.com/support and access our comprehensive
selection of online tools, documentation, and downloads.
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materi-
als and workmanship for the periods noted, following the initial date of
purchase. During this period, the products may be returned for repair,
or replacement with equivalent products at our discretion. The warranty
covers parts and labor costs only. StarTech.com does not warrant its
products from defects or damages arising from misuse, abuse, alteration,
or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA
LLP (or their officers, directors, employees or agents) for any damages
(whether direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid
for the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.

StarTech.com has been making “hard-to-find easy” since 1985,
providing high quality solutions to a diverse IT and A/V customer
base that spans many channels, including government, education
and industrial facilities to name just a few. We offer an unmatched
selection of computer parts, cables, A/V products, KVM and Serv-
er Management solutions, serving a worldwide market through our
locations in the United States, Canada, the United Kingdom and
Taiwan.
Visit www.startech.com today for complete information about all
our products and to access exclusive interactive tools such as the
Cable Finder, Parts Finder and the KVM Reference Guide.