StarTech.com PEX1PECP User manual

Manual Revision: 02/01/2012
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
PEX1PECP
PEX2PECP
1 Port PCI Express Parallel Adapter Card - EPP/ECP
2 Port PCI Express Parallel Adapter Card - EPP/ECP
*PEX2PECP shown
*actual product may vary from photos

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected
names and/or symbols of third-party companies not related in any way to StarTech.com.
Where they occur these references are for illustrative purposes only and do not represent an
endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to
which this manual applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges
that all trademarks, registered trademarks, service marks, and other protected names and/or
symbols contained in this manual and related documents are the property of their respective
holders.

Instruction Manual i
Table of Contents
Introduction .......................................................................................................................................................1
Features .................................................................................................................................................................1
Before You Begin..............................................................................................................................................1
Contents.........................................................................................................................................................1
System Requirements ............................................................................................................................1
Installation............................................................................................................................................................2
Installing the drivers (Windows XP)...............................................................................................2
Verifying Installation................................................................................................................................4
Parallel port address conguration................................................................................................4
Windows 2000............................................................................................................................................5
Windows 2003 Server.............................................................................................................................5
Specications.....................................................................................................................................................6
Technical Support...........................................................................................................................................7
Warranty Information....................................................................................................................................7

Instruction Manual 1
Introduction
Thank you for purchasing a StarTech.com PCI Express Parallel Card. This card will allow you to
add a DB25 connectivity for optimized performance from your parallel devices, while taking
advantage of the speed and power of PCI Express with plug and play connections to devices
such as printers, scanners and more.
Features
• Compliant with PCI Express Base Specication 1.0a
• Supports Standard Parallel Port(SPP), Enhanced Parallel Port (EPP), & Enhanced Capability
Port (ECP)
• Oers data transfer rates of up to 1.5 MB/Sec
Packaging Contents
• 1 x PCI Express Parallel Card
• 1 x Driver CD
• 1 x Instruction Manual
System Requirements
• Microsoft Windows 2000/ XP/ Server 2003/ Vista/ Server 2008 R2/ 7 (32/64-bit)
• PCI Express enabled computer with an available PCI Express slot

Instruction Manual 2
Installation
1. Make sure that your system is unplugged and that you are grounded.
2. Remove the cover of your system (see your computer's user manual for details, if necessary)
and gently turn your computer onto its side, so that the PCI Express expansion slot openings
on the motherboard are facing upwards.
3. Locate an empty PCI Express slot and remove the metal plate that covers the corresponding
rear bracket. You may need a Phillips screwdriver to perform this step.
Retain the screw! You will need it to secure the card later.
4. Gently insert the card into the empty slot, making sure it is rmly seated.
5. Secure the card in place using the screw you removed in Step 3.
PEX2PECP Only: Secure the second port to another available rear bracket.
6. Replace and secure the computer cover.
Installing the Drivers
Upon rebooting the computer, Windows will detect the newly installed card, and launch the
Found New Hardware Wizard.
Windows XP
1. When the Found New Hardware Wizard appears, select Install from a list or specic location
(Advanced), then click Next.

Instruction Manual 3
2. Insert the Driver CD, and select Search for the best
driver in these locations. Please ensure that there
is a checkmark next to Include this location in the
search, and that all other checkmarks have been
removed. Enter the following path in the text line
provided:
For PEX1PECP : D:\PCIe\1P\XP
For PEX2PECP : D:\PCIe\2P\XP
Alternatively, you can click on the Browse button,
and locate the le according to the path specied
above.
Once the correct folder has been selected, please
click on the Next button to advance.
3. If you receive a notication that the drivers you
are installing have not yet passed Windows
Logo Testing, please click on Continue Anyway,
followed by Finish. Please note that the software
included with PEX1PECP/PEC2PECP has been
thoroughly tested for stability and compatibility.
4. Windows will notify you once the driver
installation has completed. Please click Finish.
You will be required to follow steps 1-4 again,
following the initial installation. Please repeat these
steps to conclude installation.

Instruction Manual 4
Verifying installation
To verify that the installation has completed successfully and that the newly installed ports are
now available:
1. Right click on My Computer, left-click on Manage. Select Device Manager.
2. Click on the [+] sign next to Ports (COM & LPT). Here, you should see the newly installed
parallel port(s) as well as a Multifunction adapter, as shown below:
Parallel Port Address conguration
Some parallel devices require a specic port designation, in order for the devices to function
properly. If your peripherals are functioning correctly with the newly installed ports, there is no
need to modify the parallel port address. However, if you are experiencing diculties:
1. From the Device Manager window, double-click Ports (COM & LPT), then double-click the
NetMos PCI ECP Parallel Port.
2. Select the Port Settings tab.
3. At the LPT Port Number box, click on the down arrow and select an LPT port that is not in use:
Following this selection, please click on OK to
save your changes.

Instruction Manual 5
Windows 2000
1. When the Found New Hardware Wizard appears, click Next to advance to the next window.
2. Select Search for a suitable driver for my device (recommended) and click Next.
3. Check Specify a location, and remove all other checkmarks from this window.
4. Insert the Driver CD, and enter the following path in the text line beneath Copy
manufacturer’s les from:
For PEX1PECP : D:\PCIe\1P\2000
For PEX2PECP : D:\PCIe\2P\2000
Alternatively, you can click on the Browse button, and locate the le according to the path
specied above.
Once the correct folder has been selected, please click on the OK button to advance.
5. Click Next, to approve the installation. Click Finish, once the installation has completed.
Windows 2003 Server
1. At the Found New Hardware Wizard, select Install from a list or specic location (Advanced),
then click Next.
2. Insert the Driver CD, and select Search for the best driver in these locations. Place a
checkmark next to Include this location in the search, and remove any other checkmarks from
this page.
3. In the text box provided, type in:
For PEX1PECP : D:\PCIe\1P\2003
For PEX2PECP : D:\PCIe\2P\2003
Alternatively, you can click on the Browse button, and locate the le according to the path
specied above.
4. Once the correct folder has been selected, please click on the Next button to advance.
5. If you receive a notication that the drivers you are installing have not yet passed Windows
Logo Testing, please click on Continue Anyway, followed by Finish. Please note that the
software included with PEX1PECP/PEC2PECP has been thoroughly tested for stability and
compatibility.
You will be required to follow steps 1-5 again, following the initial installation. Please repeat
these steps to complete installation.

Instruction Manual 6
Specications
Host Interface PCI Express
Connectors PEX1PECP: 1 x 25 pins parallel connector
PEX2PECP: 2 x 25 pins parallel connector
Data Transfer Rate (Max.) 1.5MB/sec
Chipset MOSCHIP MCS9805CV
MOSCHIP MCS9815CV
OS Support
Windows 95/ 98SE/ ME/ 2000/ XP(32/64bit)/
Vistal(32/64bit)/ 7(32/64bit)/ Server 2008
R2, and Linux
Operation Temperature 0 °C ~ 70 °C
Storage Temperature 0 ~ 115 °C
Product Dimensions PEX1PECP: 92x21x120mm
PEX2PECP: 92x21x120mm + 40x21x120mm
Product Weight PEX1PECP: 90g
PEX2PECP: 95g

Instruction Manual 7
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide
industry-leading solutions. If you ever need help with your product, visit www.startech.com/
support and access our comprehensive selection of online tools, documentation, and downloads.
Warranty Information
This product is backed by a lifetime year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for
the periods noted, following the initial date of purchase. During this period, the products may
be returned for repair, or replacement with equivalent products at our discretion. The warranty
covers parts and labor costs only. StarTech.com does not warrant its products from defects or
damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers,
directors, employees or agents) for any damages (whether direct or indirect, special, punitive,
incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss,
arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If
such laws apply, the limitations or exclusions contained in this statement may not apply to you.