StarTech.com PEXUSB7LP User manual

PCI Express USB 2.0 Adapter
Card
7-Port PCI Express to High
Speed USB 2.0 Adapter Card
PEXUSB7LP
Instruction Manual

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the receiver•
is connected.
Consult the dealer or an experienced radio/TV technician for help.•
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an
endorsement of the product(s) to which this manual applies by the third-party company
in question. Regardless of any direct acknowledgement elsewhere in the body of
this document, StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this
manual and related documents are the property of their respective holders.

i
Table of Contents
Introduction..................................................................... 1
Packaging Contents.....................................................................1
System Requirements .................................................................1
Installation....................................................................... 2
Hardware Installation...................................................................2
Driver Installation.........................................................................3
Verifying Installation.....................................................................3
Specifications.................................................................. 4
Technical Support........................................................... 5
Warranty Information...................................................... 5

1
Introduction
The StarTech.com 7-Port PCI Express to USB 2.0 Adapter Card
adds an additional 6 external and 1 internal USB 2.0 ports to any PCI
Express compatible computer system. Designed for versatility and
performance with support for high speed USB 2.0 data transfer rates
of up to 480 Mbps, this low profile USB card also includes a standard
profile (full height) bracket for installation in full form factor cases.
Packaging Contents
1 x PEXUSB7LP card•
1 x Full Height bracket•
1 x Driver Installation CD•
1 x Instruction Manual•
System Requirements
PCI Express enabled computer system with available slot•
Microsoft• ®Windows®XP/Server 2003/Vista/Server 2008 R2/7
(32/64-bit) or Linux®
5-pin IDC USB
header
SP4 power
connector
USB type A
connectors

2
Installation
WARNING! PCI Express cards, like all computer equipment, can be
severely damaged by static electricity. Be sure that you are properly
grounded before opening your computer case or touching your PCI
Express card. StarTech.com recommends that you wear an anti-static
strap when installing any computer component. If an anti-static strap
is unavailable, discharge yourself of any static electricity build-up by
touching a large grounded metal surface (such as the computer case)
for several seconds. Also be careful to handle the PCI Express card by
its edges and not the gold connectors.
Hardware Installation
Turn your computer off and any peripherals connected to the1.
computer (i.e. Printers, external hard drives, etc.). Unplug the power
cable from the rear of the power supply on the back of the computer
and disconnect all peripheral devices.
Remove the cover from the computer case. See documentation for2.
your computer system for details.
Locate an open PCI Express slot and remove the metal cover plate3.
on the rear of the computer case (Refer to documentation for your
computer system for details.). Note that this card will work in PCI
Express slots of additional lanes (i.e. x4, x8 or x16 slots).
Insert the card into the open PCI Express slot and fasten the bracket4.
to the rear of the case. If using a case that fits full height cards,
remove the low profile bracket (held by small screws) from the card
and replace with the included full height bracket.
To use the internal 5-pin IDC USB header, connect an internal USB5.
peripheral (i.e. front mounted USB ports, internal card readers, etc)
directly to the IDC header, or use an adapter cable to convert it to an
external USB type A connector (StarTech.com ID: USBMBADAPT).
Connect an SP4 floppy power connector from the computer power6.
supply to the connector on the card.

3
Place the cover back onto the computer case.7.
Insert the power cable into the socket on the power supply and8.
reconnect all other connectors removed in Step 1.
NOTE: Due to the stacked nature of the external USB ports, using USB
cables with large connectors may interfere with adjacent ports.
Driver Installation
Windows XP/Server 2003/Vista/Server 2008 R2/7
No driver installation is required for these operating systems, as this
USB card is natively supported, so the drivers are already installed.
Verifying Installation
From the main desktop, right-click on “My Computer” (“Computer”
in Vista/7), then select Manage. In the new Computer Management
window, select Device Manager from the left window panel.
Under the “Universal Serial Bus Controllers” category, new “VIA” host
controller devices should now be listed.

4
Specications
Bus Interface PCI Express rev 1.1
(x1 connector)
Chipset ID VIA VT6212L
Connectors*
6 x USB type A
1 x 5-pin IDC USB header
1 x SP4 floppy power
Maximum Data Transfer Rate USB 2.0: 480Mbps
Operating Temperature 0°C ~ 60°C (32°F ~ 140°F)
Storage Temperature -20°C ~ 85°C (-4°F ~ 185°F)
Humidity 5 ~ 95% RH
Compatible Operating
Systems
Windows XP/Server 2003/Vista/
Server 2008 R2/7 (32/64-bit),
Linux
* the three external USB ports closest to the bottom of the card (closes PCIe connector) use
independant data channels. The other external USB ports and the internal header all share a
single data channel

5
Technical Support
StarTech.com’s lifetime technical support is an integral part of our
commitment to provide industry-leading solutions. If you ever need
help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and
downloads.
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in
materials and workmanship for the periods noted, following the initial
date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion.
The warranty covers parts and labor costs only. StarTech.com does
not warrant its products from defects or damages arising from misuse,
abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA
LLP (or their officers, directors, employees or agents) for any damages
(whether direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid
for the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.

StarTech.com has been making “hard-to-find easy” since 1985,
providing high quality solutions to a diverse IT and A/V customer
base that spans many channels, including government, education
and industrial facilities to name just a few. We offer an unmatched
selection of computer parts, cables, A/V products, KVM and Server
Management solutions, serving a worldwide market through our
locations in the United States, Canada, the United Kingdom and
Taiwan.
Visit www.startech.com today for complete information about all
our products and to access exclusive interactive tools such as the
Cable Finder, Parts Finder and the KVM Reference Guide.