Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: June 22, 2022 4:25 PM
Product Diagram (CMDUCT1UX2)
Front View
Component Function
1Mounting Ears • Secures the Duct Cable Management Panel to the
rack
2Duct Cover • Keeps cables out of the way and can be removed for
installation or upgrades
3Cable Management
Fingers
• Allows cables to be inserted and held in place
• Available along the length on both sides
4Duct Cover Latches
• Each corner of the Duct Cable Management Panel
has a latching mechanism that keeps the Duct Cover
in place
5Cable Path • Allow the inserted cables to run o to the side of the
Duct Cable Management Panel
Rear View
Component Function
1Pass-through Holes • Insert the cables through the Pass-through Holes
1U Horizontal Finger Duct Cable Management Panel for Racks - Includes Cover
Package Contents
• Horizontal Cable Duct x 1
• M6 Screws x 4
• M6 Cage Nuts x 4
• Washers x 4
• Quick-Start Guide x 1
Requirements
For the latest manuals, product information, technical specications, and declarations of
conformance, please visit: www.startech.com/CMDUCT1UX2
• Phillips head screwdriver
• Cage nut tool (Optional)
Installation
1. Determine the U Height Number or Mounting Location on the Posts of the rack
where to install the Duct Cable Management Panel.
2. Install the M6 Square Cage Nuts (x 4) onto the Square Cage Nut Holes on the
chosen U Height Number. Use a Cage Nut Tool if available or your preferred
installation method.
3. Align the Mounting Ears with the previously inserted M6 Square Cage Nuts on the
rack posts.
4. Insert the Washers (x 4) onto the M6 Screws (x 4). Use a Phillips Head Screwdriver
to install the M6 Screws (x 4) and fasten the Duct Cable Management Panel to the
Mounting Posts of the rack.
Operation
1. Insert the cables through the Cable Management Fingers and the Pass-through
Holes at the rear. Organize as desired.
2. Latch and secure the Duct Cover using the four Duct Cover Latches.
1
5
4
3
1
2
