StarTech.com Presentation Jockey Manual

The Professionals’ Source For Hard-to-Find Computer Parts
VS810R Instruction Guide
VIDEO SWITCH
* Actual product may vary from photo
VS810R.qxd 6/12/03 10:24 AM Page 1

FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
VS810R.qxd 6/12/03 10:24 AM Page 2

1
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using Your Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
VS810R.qxd 6/12/03 10:24 AM Page 1

2
Introduction
Thank you for purchasing a StarTech.com 8-port video switch. Now you can
conveniently display the video output of eight separate computer systems on a single
monitor or through a multimedia projector, eliminating the unnecessary expense of
purchasing a separate monitor for each computer. Perfect for corporate presentations or
learning centers, this easy-to-use switch features a concentric design for easy installation
and use. The VS810R comes with a remote control to switch between computers and
supports high video resolution up to 2048 x 1536.
Features
•Displays the video output of eight separate computers on a single monitor or
projector
•Allows quick and easy access through its concentric design
•Includes 5.9 ft (1.8m) infrared receiver and remote control for easy computer selection
•Supports VGA, SVGA, XGA, and Multisync monitors
•Supports high-resolution video up to 2048 x 1536, DDC, DDC2, DDC2B
•Backed by StarTech.com’s one year warranty
Before You Begin
To ensure a quick and easy switch installation, please read through this section before
attempting to install your switch.
System Requirements
•One VGA, SVGA, XGA, or Multisync compatible analog monitor with a standard PC
high-density cable with a 15-pin HDB-type male computer
•One VGA, SVGA, XGA, or Multisync analog video card having a standard PC 15-pin
HDB-type male connector for each computer
•Avideo cable with one male and one female HDB-15 connector at each end for each
computer you are installing
Package Contents
•1x 8-port video switch
•1x IR remote control
•1x 5.9 ft (1.6m) IR receiver
•1x 3.9 ft (1.2m) VGA extender cable
•1x power adapter
VS810R.qxd 6/12/03 10:24 AM Page 2

3
Installation
Before you begin the install, make sure that all devices are turned off and powered
down.
1. Plug the external IR receiver into the receiver port (see above). The receiver’s cable
allows the receiver to be positioned 5.9 ft (1.8m) away from the switch.
2. Plug your monitor or digital projector into the blue female 15-pin port.
3. Plug the power adapter into the power port on the switch and plug the other end into
an available power source.
4. For each of your computers, use a standard PC HDB-15 cable to connect your
computer’s video cards to one of the eight video ports on the switch.
5. Turn on all equipment.
Using Your Switch
Once all your devices are connected and powered, you should be able to see LEDs on the
top of the switch and select your different computers.
Interpreting the LEDs
The numbered LEDs on the top of the switch indicate which computers are connected
and which computer is selected.
•An orange LED indicates that the computer connected to that port is online.
•Agreen LED indicates that the computer connected to that port is currently selected.
•When the LED is not lit, it indicates that there is no computer connected to that port,
or that the computer at that port is in standby mode.
VS810R.qxd 6/12/03 10:24 AM Page 3

4
Computer Selection
There are several different options you can use to select your different computers.
•Pushbuttons: Pressing the Port Up or Port Down buttons on the switch will
allow you to scroll between your computers in numerical order.
•Remote Control: You can use the Port Up or Port Down buttons on the remote
control to scroll between your computers in numerical order. You can also push one
of the numbered Port Selection keys to select the computer located at that port.
When using the remote control, remember to aim the remote at the IR receiver.
VGA Display
You can turn the video display on and off using the remote or the switch itself.
•Pushbuttons: To turn the VGA display on or off, you can press the VGA Display
On/Off button located on the top of the device between the Port Up and Port Down
pushbuttons.
•Remote Control: Press the VGA Display ON/OFF button to turn your display on
and off.
Technical Specifications
Connectors Video In: 8 x HDB-15 male
Video Out: 1x HDB-15 female
Power In: 1 x Power adapter jack
IR: 1 x jack
LEDs 8 x online/selected (Orange/Green)
1 x VGA display on/off (Blue)
Port Selection Pushbuttons, IR remote control
Video Resolution 2048 x 1536, DDC, DDC2, DDC2B
Power Consumption AC 9V, 4.5W
Operating Temperature 32~122ºF (0~50ºC)
Storage Temperature -4~140ºF (-20~60ºC)
Humidity 0~80% RH non-condensing
Housing Plastic
Weight 0.99 lbs (0.45kg)
VS810R.qxd 6/12/03 10:24 AM Page 4

5
Technical Support
The following technical resources are available for this StarTech.com product:
On-line help:
We are constantly adding new information to the Tech Support section of our web site. To
access this page, click the Tech Support link on our homepage, www.startech.com. In the
tech support section there are a number of options that can provide assistance with this
card.
Knowledge Base - This tool allows you to search for answers to common issues using
key words that describe the product and your issue.
FAQ - This tool provides quick answers to the top questions asked by our customers.
Downloads - This selection takes you to our driver download page where you can
find the latest drivers for this product.
Call StarTech.com tech support for help: 1-519-455-4931
Support hours: Monday to Friday 9:00AM to 5:00PM EST (except holidays)
Warranty Information
This product is backed by a one-year warranty. In addition, StarTech.com warrants its
products against defects in materials and workmanship for the periods noted below,
following the initial date of purchase. During this period, the products may be
returned for repair, or replacement with equivalent products at our discretion. The
warranty covers parts and labor costs only. StarTech.com does not warrant its products
from defects or damages arising from misuse, abuse, alteration, or normal wear and
tear.
Limitation of Liability
In no event shall the liability to StarTech.com Ltd. (or its officers, directors, employees or
agents) for any damages (whether direct or indirect, special, punitive incidental,
consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss,
arising out of related to the use of the product exceed the actual price paid for
the product.
Some states do not allow the exclusion or limitation of incidental or consequential
damages. If such laws apply, the limitations or exclusions contained in this statement
may not apply to you.
VS810R.qxd 6/12/03 10:24 AM Page 5

Revised:June 9, 2003
VS810R.qxd 6/12/03 10:24 AM Page 6