Stauer 15442 User manual

WATCH DISPLAY TIMESETTING - BEFORE USE SET YOUR TIME ZONE
A - 24 HOUR
B - PUSH BUTTON
C - DISPLAY
D - RECESSED BUTTON
Hours and minutes are shown via the
analogue display. Date and second are shown
in the digital display.
1.Briefly press the push-button(B) to
change between the displays.The date
appears in the format: day at the right
and month at the left.
2. Press the push-button (B) briefly once
again. The seconds are shown at the left,
the “tower” symbol at the right.
Time and date:
If the wristwatch is out of the range of the
transmitter or the reception is disturbed, you
can set the time manually. If the signals are
received correctly, the “tower” symbol is
shown and setting time and date manually is
not possible.
1. Keep the push-button (B) and the recessed
button(D) pushed simultaneously for longer
than 3 seconds. This is how you change to
the setting mode for time and date. The
seconds flash in the display.
2. Press the push-button (B) briefly. The sec-
onds are set to zero. Briefly push the recessed
button (D); the minutes flash in the display.
Press the push-button (B) to set the min-
utes. In every setting menu the display
advances once step/value by pressing the
push-button (B) briefly. Keep the
push-button (B) pressed longer, and the dis-
play moves fast forward.
3.By pushing the recessed button (D) briefly
you change the setting menu in the follow-
ing order: > seconds > minutes > hours >
year > month > day > the display of date
without the possibility to adjust it > and
again seconds, etc.
If the time is displayed incorrectly without
undisturbed radio reception,the hands may
have to be adjusted by mechanical means.
1.Press the push-button for longer than 3
seconds. The hands move towards the
12:00 position.
2a.If the hands do not stop moving at 12:00,
briefly push the recessed button (D) once.
The large hand will advance in small steps.
Push the recessed button (D) briefly several
times to set the hands to exactly the 12:00
position.
2b.When the hands stop moving at the 12:00
position, quit this setting menu by pressing
the push-button (B) briefly.
3.Press the recessed button (D) on the left to
set your present time zone.
(e.g. E = Eastern Time, C = Central Time, etc.)
INSTRUCTION MANUAL
IMPORTANT
Stauer Titanium Atomic Watch
Carry out the desired settings. As soon as the
radio signal from the transmitter can be received
again, the watch adjusts automatically to the
present time.
Starting signal search manually:
Should the radio reception be disturbed, you can
start the signal manually.
1.Press the push-button (B) for longer than 3 sec-
onds. The hands move to the 12:00 position.
Then the symbols “SET” and “12” flash alter-
nately in the display. Should the hands not be
positioned to exactly 12:00 o'clock, you have to
adjust their position manually.
2. Put the watch on a steady surface for better recep-
tion. Before reception takes place, the hands auto-
matically go back to the time after 15 seconds or
after pushing the (B) button briefly. The watch
now switches to reception. If reception is dis-
turbed (for example by metallic objects or
unshielded electric appliances), the watch starts
automatically several times to receive time signals.
The watch adjusts automatically to the
internally stored time and attempts to
receive radio signals. After successful radio
reception the time will be set automatically.
Setting the time zone:
When traveling to countries where the time
deviates from Greenwich Mean Time or
Daylight Saving Time, you can set the
desired time zone manually. The setting is
carried out in hour steps.
1.Push the recessed button (D) for longer than
3 seconds. The present hour is shown at the
left of the display. At the right you can see
the presently set time zone, possibly with a
preceding negative sign.
2.Press the push-button (B) briefly. The time
zone advances by one hour. The hands
move towards the adjusted time and the dis-
play changes accordingly. With continued
ADJUSTING THE HANDS
brief pressing on the push-button (B), the
timezone advances by one hour.
3.To end the setting, briefly push the recessed
button (D) or wait for longer than 15 sec-
onds without pushing one of the buttons.
The watch switches over to normal display
of date and time. The watch uses the F-1
U.S. Atomic Clock in Boulder, Colorado.
Keep in mind the indications concerning
the time difference (see table) change during
the Daylight Saving Time.
Visit us at, www.stauer.com to learn
more about the fantastic benefits of owning
a Stauer Watch!
www.stauer.com