ROTORCRAFT PE903 User manual

YOUR
MANUAL
Congratulations on the purchase of your ROTORCRAFT.
Valid from the date of shipment (see invoice date; a copy of
the invoice is to be enlcosed when making a claim), this
quality product is guaranteed against material and
construction
construction failure for 24 months. Batteries, watch strap,
glass and wear parts are excluded. Damage incurred through
incorrect usage, interference by a third party, incorrect battery
replacement and through other extreme interference such as
falls, impact, water, result in the loss of a guarantee claim.
We value your feedback, so let us know what you think.
GUARANTEE.
FOR MORE INFO ABOUT GUARANTEE
PLEASE VISIT ROTORCRAFTWATCHES.COM

SETTING THE TIME
Pull the crown out to the 2nd
click position.
Turn the crown clockwise to
set hour and minute hands.
After the time has been set,
push
push the crown back to the
Normal position.
1
2
3
HOW TO USE THE
CHRONOGRAPH
Press the Button A to start
chronograph. The chronograph
seconds dial at 6 and 12 o'clock starts
to rotate. When the chronograph
second hand moves 60 seconds
second hand moves 60 seconds
in a circle, the chronograph
minute at 9 o'clock moves in
minute increments clockwise,
and so on.
When the chronograph button
is pressed again, the chronograph
stops, and
stops, and the indicator of
chronograph second dial and
minute dial is the recording time.
After finishing timing, press the
reset button B to reset the
chronograph to zero.
Chrono 1/10 sec: The stopwatch
1/10 second hand moves for a
first minute. After one minute,
it indicates the measurement
time when it is stopped.
1
2
3
4
SETTING THE DATE
Pull the crown out to the 1st
click position.
Turn the crown clockwise to
set the date.
* If the date is set between
the hours of around 9:00 PM
and 4:00 AM, the date may not
change on the following day.
After the date has been set,
push the crown back to the
normal position.
1
2
3