STAUFF OCS I User manual

Oil Quality Display (OCS I-Displays)
QUICK START GUIDE
WHAT’S IN THE BOX
Quick Start
Guide
Calibration
Certificate
1. Configuration
2. Installation
Configuration parameters:
►Warning and alarm levels
►Temperature units
►Datalog interval
►Rate of change interval
►Bluetooth on/off
1
2
6
3
5
4
3. Activation steps
Check installation
Power on
Wait for 1 minute
Check output
DEFAULT CONFIGURATION
(Quality warning thresholds are configurable)
1200
1000
250
0
500
Sensor in air / No oil detected
NOTE: Cables are sold separately
New
Good
Worn
Severely worn / Needs replacing
End of life
Alarm (HIGH)
TDN Oil quality
Warning (HIGH)
Warning (LOW)
Alarm (LOW)
RS485A
RS485B
Oil quality
Oil Temperature
OCS I-Displays port for power and data
+
-
OCS I-DISPLAY
OCS
4. Troubleshooting
1. Check configuration (step 1)
2. Refer to manual
3. [email protected]
Allow configuration cable
to update drivers.

OCS Display
OCS
OCS
OCS I-CAB-Display
3rd Party Options
4-20 mA
OCS Display
OCS
OCS-USB Interface / 2
External power supply
connection
OCS-USB Interface / 2
OCS I-CAB-Display
PC / Laptop
PC / Laptop
External power supply
connection
OCS
4-20 mA
CANbus
Modbus