Steam Rhino 60 User manual

Rhino
Advanced mod
60W
USER MANUAL
Product sold to minor is prohibited

Thank you for choosing STEAM Rhino MOD.
STEAM Rhino 60W Mod is an advanced vaping system designed to meet your critical demand in
vaping. Made with full solid metal enclosure to ensure durability, the circuitry inside is also based
on the latest technology to give you the best protection and performance possible.
Before using this product, please read the manual carefully to enjoy the most out of this product.
Congratulations!
One unit - STEAM Rhino 60 MOD Device
One unit - LG LGDBHE21865 Li Ion battery (installed)
One unit - High Transfer Micro USB cable
One unit - User Manual
Package Content
* LGDBHE21865 Li Ion battery is installed to the device. A round sticker is placed to the bottom (negative
end) of the battery for shipping safety. Please remove the sticker before using the device.
Warning
STEAM Rhino battery MOD products are intended for use by adults only. Please keep all components away
from children or pets. Improper use or modication of this device is prohibited and could cause risk.
Electronic Cigarette products are not intended for use by non smokers, persons of illegal smoking age, women
who are pregnant or breastfeeding, or persons with or at risk of heart disease, high blood pressure,
hypertension, diabetes, or taking medicine for depression or asthma. Consult a physician if you are experiencing
any sign of discomfort from using electronic cigarettes and stop using this product immediately.
510 Connector
Vape button
Up button
Down button
OLED Screen
Battery
Cap
Micro USB port
Buttons and Functions

5~60W Wattage Adjustable
3~10V Voltage Adjustable
Supports Sub Ohm Atomizers to 0.2Ω
Short Circuit protection
Temperature monitoring protection 70º
Circuit Overload Protection
Battery Low Voltage Protection
Atomizer Short protection
Pass-Through Micro USB port to charge the battery and use the device simultaneously.
A Micro USB port is located on the bottom of the RHINO. This pass through port allows you to charge
your battery and use the device at the same time.
A high transfer Micro USB cable is included with your new RHINO unit.
The 18650 battery inside can also be removed to charge separately using a quality18650 Li-Ion charger,
if desired.
For best performance, we strongly recommend using the high output 18650 batteries supplied with the
device, or other high quality 18650 batteries with equivalent performance .
Charging the Device
Features
Current output
setting
Battery level
60W
0.5Ω
Atomizer
Resistance
Main Screen (Vape Ready)
This is the main screen displayed when you vape (unless turned OFF). The main screen shows some of the
most notable information you will need.

To enter menu, click on the Vape button 3 times within 1 second. You should see
1 System
ON/OFF
There are 5 selections in the menu. Use the Up or Down button to scroll to the previous or next selection.
Once the selection is shown on the OLED screen, click on the Vape button to enter the selection, then use
the Up or Down button to change the setting. Click on the Vape button again to conrm the setting.
If no activity on the buttons for 3 seconds, the system will automatically resume to Vape Ready status (Main
screen).
Navigating Around the Menu
1 System
ON/OFF
This function turns the system ON and OFF. If turned OFF, the Vape button will not respond in Vape Ready
status.
This function turns the OLED display ON and OFF. When the display is turned OFF, nothing will show on
the OLED display when the Vape button is pressed during vaping.
This function allows you to switch between Voltage mode and Wattage mode. Once mode is set, the Main
Screen will indicate the current value set in Voltage or Wattage. You can use the Up or Down button to
adjust the value.
This function indicates the pus you have taken since the last reset. To reset the pu record, click on the
Up or Down button once the pu number is shown, when screen shows Clear, press the Vape button to
reset the pu counter to 0.
This function allows you to exit the menu to Vape Ready mode. No activity on the buttons for 3 seconds
will also exit the menu.
2 Display
ON/OFF
3 Wattage
Voltage
4 Pu
Record
Exit
Menu Selections

To prevent the Up or Down button from being pressed accidentally, you can lock the Up and Down
buttons by pressing both buttons simultaneously for 3 seconds.
To unlock the Up and Down buttons, press both buttons again for 3 seconds to unlock.
When the Up and Down buttons are locked, the Vape button will remain functional.
System shut down is useful when you are not vaping for a longer period of time, or carrying the device i
n your pocket.
To quickly shut down the system, press the Vape button and the Down button simultaneously for 3
seconds.
To switch the system back ON, press the Vape button and the Down button simultaneously again for
3 seconds.
Lock and Unlock Up/Down Button
Quick Shut Down
For more product information, please visit us at
www.steamecig.com
Thank you for choosing STEAM products!