Stem audio Table1 User manual

Speaker

Volume Up

Speaker

Volume Down

All Stem endpoints can be used as solo standalone devices

or in unison with other devices within the Stem ecosystem.

If you plan on using this device as an individual unit, then

follow the standalone setup instructions. If you plan on

using multiple Stem devices in your room, then skip ahead

to the multiple device setup instructions.

LED

Light Ring

Speaker

9 Beamforming

Microphones

Mute

To mute Table’s microphones during a call, press

located on the top of the device. When muted, the

light ring on the device will slowly pulse red. To

unmute, just press again.

Ethernet

Kensington Lock

USB

Microphone

Mute

User Manual

Table

Optimized for tabletops and flat surfaces, the Stem Table is

a high-quality conference speakerphone that turns any

environment into a professional conference room. Equipped

with nine microphones that perform real beamforming and

an innovative downward-facing speaker for amplified

performance, Table takes the quality of your meetings to the

next level.

Overview Standalone Setup (option 1) Multi-Device Setup (option 2)Setting Up

1. Place the device in the desired location in the room.

Using an Ethernet cable, connect the device to a network

that supports PoE+.

Note: If your network doesn’t support PoE+, you should

purchase a separate PoE+ injector or PoE+ enabled switch.

This connection provides the device

with power, data, and other IoT and SIP capabilities.

If you need video conferencing capabilities, use the USB

type B cable provided and connect the device to your PC.

Lastly, we recommend you complete setting up your

room via the Stem ecosystem platform.For more

information on setting up your room, you can visit

stemaudio.com/manuals or stemaudio.com/videos

Note: The ecosystem platform is available on the Stem

Control or in iOS, Windows, and Android apps. You can

also access the platform through your web browser by

typing in the product’s IP address.

That’s it! Table is all set up to work as a standalone device.

Place the device in the desired location in the room.

Using an Ethernet cable, connect the device to a network

that supports PoE+.

Note: If your network doesn’t support PoE+, you should

purchase a separate PoE+ injector or PoE+ enabled switch.

This connection provides the device

with power, data, and other IoT and SIP capabilities.

You must complete setting up your room via the Stem

ecosystem platform.For more information on setting up

your room, you can visit stemaudio.com/manuals or

stemaudio.com/videos

Note: The ecosystem platform is available on the Stem

Control or in iOS, Windows, and Android apps. You can

also access the platform through your web browser by

typing in the product’s IP address.

That’s it! Table is all set up to work within the Stem

ecosystem.

The Directional Array

During a call, Table uses proprietary beamforming

technology to locate a legitimate voice source and to

steer an array towards it. This allows Table to focus on

the speaker in the room and cancel out all other noise.

The beamforming process is dynamic as it adjusts the

direction of the array when the source of sound changes

or moves. In a call, when a voice is detected in the room,

one or multiple blue lights located in the light ring will

indicate which direction Table’s audio beam is focusing

on. This is the direction that will be heard best by the far-

end of the call (the person you are talking to).

Using Table

Volume Control

Speaker

Change the speaker volume by using to increase,

or to decrease the volume.

model: table1

When setting up multiple Stem devices in a room, make

sure you have a Hub. All communications between the

device and the far-end will be done through the Hub, so

no USB connection is needed.

Speaker

Volume Up

Speaker

Volume Down

All Stem endpoints can be used as solo standalone devices

or in unison with other devices within the Stem ecosystem.

If you plan on using this device as an individual unit, then

follow the standalone setup instructions. If you plan on

using multiple Stem devices in your room, then skip ahead

to the multiple device setup instructions.

LED

Light Ring

Speaker

9 Beamforming

Microphones

Mute

To mute Table’s microphones during a call, press

located on the top of the device. When muted, the

light ring on the device will slowly pulse red. To

unmute, just press again.

Ethernet

Kensington Lock

USB

Microphone

Mute

User Manual

Table

Optimized for tabletops and flat surfaces, the Stem Table is

a high-quality conference speakerphone that turns any

environment into a professional conference room. Equipped

with nine microphones that perform real beamforming and

an innovative downward-facing speaker for amplified

performance, Table takes the quality of your meetings to the

next level.

Overview Standalone Setup (option 1) Multi-Device Setup (option 2)Setting Up

1. Place the device in the desired location in the room.

Using an Ethernet cable, connect the device to a network

that supports PoE+.

Note: If your network doesn’t support PoE+, you should

purchase a separate PoE+ injector or PoE+ enabled switch.

This connection provides the device

with power, data, and other IoT and SIP capabilities.

If you need video conferencing capabilities, use the USB

type B cable provided and connect the device to your PC.

Lastly, we recommend you complete setting up your

room via the Stem ecosystem platform.For more

information on setting up your room, you can visit

stemaudio.com/manuals or stemaudio.com/videos

Note: The ecosystem platform is available on the Stem

Control or in iOS, Windows, and Android apps. You can

also access the platform through your web browser by

typing in the product’s IP address.

That’s it! Table is all set up to work as a standalone device.

Place the device in the desired location in the room.

Using an Ethernet cable, connect the device to a network

that supports PoE+.

Note: If your network doesn’t support PoE+, you should

purchase a separate PoE+ injector or PoE+ enabled switch.

This connection provides the device

with power, data, and other IoT and SIP capabilities.

You must complete setting up your room via the Stem

ecosystem platform.For more information on setting up

your room, you can visit stemaudio.com/manuals or

stemaudio.com/videos

Note: The ecosystem platform is available on the Stem

Control or in iOS, Windows, and Android apps. You can

also access the platform through your web browser by

typing in the product’s IP address.

That’s it! Table is all set up to work within the Stem

ecosystem.

The Directional Array

During a call, Table uses proprietary beamforming

technology to locate a legitimate voice source and to

steer an array towards it. This allows Table to focus on

the speaker in the room and cancel out all other noise.

The beamforming process is dynamic as it adjusts the

direction of the array when the source of sound changes

or moves. In a call, when a voice is detected in the room,

one or multiple blue lights located in the light ring will

indicate which direction Table’s audio beam is focusing

on. This is the direction that will be heard best by the far-

end of the call (the person you are talking to).

Using Table

Volume Control

Speaker

Change the speaker volume by using to increase,

or to decrease the volume.

model: table1

When setting up multiple Stem devices in a room, make

sure you have a Hub. All communications between the

device and the far-end will be done through the Hub, so

no USB connection is needed.

Speaker

Volume Up

Speaker

Volume Down

All Stem endpoints can be used as solo standalone devices

or in unison with other devices within the Stem ecosystem.

If you plan on using this device as an individual unit, then

follow the standalone setup instructions. If you plan on

using multiple Stem devices in your room, then skip ahead

to the multiple device setup instructions.

LED

Light Ring

Speaker

9 Beamforming

Microphones

Mute

To mute Table’s microphones during a call, press

located on the top of the device. When muted, the

light ring on the device will slowly pulse red. To

unmute, just press again.

Ethernet

Kensington Lock

USB

Microphone

Mute

User Manual

Table

Optimized for tabletops and flat surfaces, the Stem Table is

a high-quality conference speakerphone that turns any

environment into a professional conference room. Equipped

with nine microphones that perform real beamforming and

an innovative downward-facing speaker for amplified

performance, Table takes the quality of your meetings to the

next level.

Overview Standalone Setup (option 1) Multi-Device Setup (option 2)Setting Up

1. Place the device in the desired location in the room.

Using an Ethernet cable, connect the device to a network

that supports PoE+.

Note: If your network doesn’t support PoE+, you should

purchase a separate PoE+ injector or PoE+ enabled switch.

This connection provides the device

with power, data, and other IoT and SIP capabilities.

If you need video conferencing capabilities, use the USB

type B cable provided and connect the device to your PC.

Lastly, we recommend you complete setting up your

room via the Stem ecosystem platform.For more

information on setting up your room, you can visit

stemaudio.com/manuals or stemaudio.com/videos

Note: The ecosystem platform is available on the Stem

Control or in iOS, Windows, and Android apps. You can

also access the platform through your web browser by

typing in the product’s IP address.

That’s it! Table is all set up to work as a standalone device.

Place the device in the desired location in the room.

Using an Ethernet cable, connect the device to a network

that supports PoE+.

Note: If your network doesn’t support PoE+, you should

purchase a separate PoE+ injector or PoE+ enabled switch.

This connection provides the device

with power, data, and other IoT and SIP capabilities.

You must complete setting up your room via the Stem

ecosystem platform.For more information on setting up

your room, you can visit stemaudio.com/manuals or

stemaudio.com/videos

Note: The ecosystem platform is available on the Stem

Control or in iOS, Windows, and Android apps. You can

also access the platform through your web browser by

typing in the product’s IP address.

That’s it! Table is all set up to work within the Stem

ecosystem.

The Directional Array

During a call, Table uses proprietary beamforming

technology to locate a legitimate voice source and to

steer an array towards it. This allows Table to focus on

the speaker in the room and cancel out all other noise.

The beamforming process is dynamic as it adjusts the

direction of the array when the source of sound changes

or moves. In a call, when a voice is detected in the room,

one or multiple blue lights located in the light ring will

indicate which direction Table’s audio beam is focusing

on. This is the direction that will be heard best by the far-

end of the call (the person you are talking to).

Using Table

Volume Control

Speaker

Change the speaker volume by using to increase,

or to decrease the volume.

model: table1

When setting up multiple Stem devices in a room, make

sure you have a Hub. All communications between the

device and the far-end will be done through the Hub, so

no USB connection is needed.

Speaker

Volume Up

Speaker

Volume Down

All Stem endpoints can be used as solo standalone devices

or in unison with other devices within the Stem ecosystem.

If you plan on using this device as an individual unit, then

follow the standalone setup instructions. If you plan on

using multiple Stem devices in your room, then skip ahead

to the multiple device setup instructions.

LED

Light Ring

Speaker

9 Beamforming

Microphones

Mute

To mute Table’s microphones during a call, press

located on the top of the device. When muted, the

light ring on the device will slowly pulse red. To

unmute, just press again.

Ethernet

Kensington Lock

USB

Microphone

Mute

User Manual

Table

Optimized for tabletops and flat surfaces, the Stem Table is

a high-quality conference speakerphone that turns any

environment into a professional conference room. Equipped

with nine microphones that perform real beamforming and

an innovative downward-facing speaker for amplified

performance, Table takes the quality of your meetings to the

next level.

Overview Standalone Setup (option 1) Multi-Device Setup (option 2)Setting Up

1. Place the device in the desired location in the room.

Using an Ethernet cable, connect the device to a network

that supports PoE+.

Note: If your network doesn’t support PoE+, you should

purchase a separate PoE+ injector or PoE+ enabled switch.

This connection provides the device

with power, data, and other IoT and SIP capabilities.

If you need video conferencing capabilities, use the USB

type B cable provided and connect the device to your PC.

Lastly, we recommend you complete setting up your

room via the Stem ecosystem platform.For more

information on setting up your room, you can visit

stemaudio.com/manuals or stemaudio.com/videos

Note: The ecosystem platform is available on the Stem

Control or in iOS, Windows, and Android apps. You can

also access the platform through your web browser by

typing in the product’s IP address.

That’s it! Table is all set up to work as a standalone device.

Place the device in the desired location in the room.

Using an Ethernet cable, connect the device to a network

that supports PoE+.

Note: If your network doesn’t support PoE+, you should

purchase a separate PoE+ injector or PoE+ enabled switch.

This connection provides the device

with power, data, and other IoT and SIP capabilities.

You must complete setting up your room via the Stem

ecosystem platform.For more information on setting up

your room, you can visit stemaudio.com/manuals or

stemaudio.com/videos

Note: The ecosystem platform is available on the Stem

Control or in iOS, Windows, and Android apps. You can

also access the platform through your web browser by

typing in the product’s IP address.

That’s it! Table is all set up to work within the Stem

ecosystem.

The Directional Array

During a call, Table uses proprietary beamforming

technology to locate a legitimate voice source and to

steer an array towards it. This allows Table to focus on

the speaker in the room and cancel out all other noise.

The beamforming process is dynamic as it adjusts the

direction of the array when the source of sound changes

or moves. In a call, when a voice is detected in the room,

one or multiple blue lights located in the light ring will

indicate which direction Table’s audio beam is focusing

on. This is the direction that will be heard best by the far-

end of the call (the person you are talking to).

Using Table

Volume Control

Speaker

Change the speaker volume by using to increase,

or to decrease the volume.

model: table1

When setting up multiple Stem devices in a room, make

sure you have a Hub. All communications between the

device and the far-end will be done through the Hub, so

no USB connection is needed.

Speaker

Volume Up

Speaker

Volume Down

All Stem endpoints can be used as solo standalone devices

or in unison with other devices within the Stem ecosystem.

If you plan on using this device as an individual unit, then

follow the standalone setup instructions. If you plan on

using multiple Stem devices in your room, then skip ahead

to the multiple device setup instructions.

LED

Light Ring

Speaker

9 Beamforming

Microphones

Mute

To mute Table’s microphones during a call, press

located on the top of the device. When muted, the

light ring on the device will slowly pulse red. To

unmute, just press again.

Ethernet

Kensington Lock

USB

Microphone

Mute

User Manual

Table

Optimized for tabletops and flat surfaces, the Stem Table is

a high-quality conference speakerphone that turns any

environment into a professional conference room. Equipped

with nine microphones that perform real beamforming and

an innovative downward-facing speaker for amplified

performance, Table takes the quality of your meetings to the

next level.

Overview Standalone Setup (option 1) Multi-Device Setup (option 2)Setting Up

1. Place the device in the desired location in the room.

Using an Ethernet cable, connect the device to a network

that supports PoE+.

Note: If your network doesn’t support PoE+, you should

purchase a separate PoE+ injector or PoE+ enabled switch.

This connection provides the device

with power, data, and other IoT and SIP capabilities.

If you need video conferencing capabilities, use the USB

type B cable provided and connect the device to your PC.

Lastly, we recommend you complete setting up your

room via the Stem ecosystem platform.For more

information on setting up your room, you can visit

stemaudio.com/manuals or stemaudio.com/videos

Note: The ecosystem platform is available on the Stem

Control or in iOS, Windows, and Android apps. You can

also access the platform through your web browser by

typing in the product’s IP address.

That’s it! Table is all set up to work as a standalone device.

Place the device in the desired location in the room.

Using an Ethernet cable, connect the device to a network

that supports PoE+.

Note: If your network doesn’t support PoE+, you should

purchase a separate PoE+ injector or PoE+ enabled switch.

This connection provides the device

with power, data, and other IoT and SIP capabilities.

You must complete setting up your room via the Stem

ecosystem platform.For more information on setting up

your room, you can visit stemaudio.com/manuals or

stemaudio.com/videos

Note: The ecosystem platform is available on the Stem

Control or in iOS, Windows, and Android apps. You can

also access the platform through your web browser by

typing in the product’s IP address.

That’s it! Table is all set up to work within the Stem

ecosystem.

The Directional Array

During a call, Table uses proprietary beamforming

technology to locate a legitimate voice source and to

steer an array towards it. This allows Table to focus on

the speaker in the room and cancel out all other noise.

The beamforming process is dynamic as it adjusts the

direction of the array when the source of sound changes

or moves. In a call, when a voice is detected in the room,

one or multiple blue lights located in the light ring will

indicate which direction Table’s audio beam is focusing

on. This is the direction that will be heard best by the far-

end of the call (the person you are talking to).

Using Table

Volume Control

Speaker

Change the speaker volume by using to increase,

or to decrease the volume.

model: table1

When setting up multiple Stem devices in a room, make

sure you have a Hub. All communications between the

device and the far-end will be done through the Hub, so

no USB connection is needed.

Speaker

Volume Up

Speaker

Volume Down

All Stem endpoints can be used as solo standalone devices

or in unison with other devices within the Stem ecosystem.

If you plan on using this device as an individual unit, then

follow the standalone setup instructions. If you plan on

using multiple Stem devices in your room, then skip ahead

to the multiple device setup instructions.

LED

Light Ring

Speaker

9 Beamforming

Microphones

Mute

To mute Table’s microphones during a call, press

located on the top of the device. When muted, the

light ring on the device will slowly pulse red. To

unmute, just press again.

Ethernet

Kensington Lock

USB

Microphone

Mute

User Manual

Table

Optimized for tabletops and flat surfaces, the Stem Table is

a high-quality conference speakerphone that turns any

environment into a professional conference room. Equipped

with nine microphones that perform real beamforming and

an innovative downward-facing speaker for amplified

performance, Table takes the quality of your meetings to the

next level.

Overview Standalone Setup (option 1) Multi-Device Setup (option 2)Setting Up

1. Place the device in the desired location in the room.

Using an Ethernet cable, connect the device to a network

that supports PoE+.

Note: If your network doesn’t support PoE+, you should

purchase a separate PoE+ injector or PoE+ enabled switch.

This connection provides the device

with power, data, and other IoT and SIP capabilities.

If you need video conferencing capabilities, use the USB

type B cable provided and connect the device to your PC.

Lastly, we recommend you complete setting up your

room via the Stem ecosystem platform.For more

information on setting up your room, you can visit

stemaudio.com/manuals or stemaudio.com/videos

Note: The ecosystem platform is available on the Stem

Control or in iOS, Windows, and Android apps. You can

also access the platform through your web browser by

typing in the product’s IP address.

That’s it! Table is all set up to work as a standalone device.

Place the device in the desired location in the room.

Using an Ethernet cable, connect the device to a network

that supports PoE+.

Note: If your network doesn’t support PoE+, you should

purchase a separate PoE+ injector or PoE+ enabled switch.

This connection provides the device

with power, data, and other IoT and SIP capabilities.

You must complete setting up your room via the Stem

ecosystem platform.For more information on setting up

your room, you can visit stemaudio.com/manuals or

stemaudio.com/videos

Note: The ecosystem platform is available on the Stem

Control or in iOS, Windows, and Android apps. You can

also access the platform through your web browser by

typing in the product’s IP address.

That’s it! Table is all set up to work within the Stem

ecosystem.

The Directional Array

During a call, Table uses proprietary beamforming

technology to locate a legitimate voice source and to

steer an array towards it. This allows Table to focus on

the speaker in the room and cancel out all other noise.

The beamforming process is dynamic as it adjusts the

direction of the array when the source of sound changes

or moves. In a call, when a voice is detected in the room,

one or multiple blue lights located in the light ring will

indicate which direction Table’s audio beam is focusing

on. This is the direction that will be heard best by the far-

end of the call (the person you are talking to).

Using Table

Volume Control

Speaker

Change the speaker volume by using to increase,

or to decrease the volume.

model: table1

When setting up multiple Stem devices in a room, make

sure you have a Hub. All communications between the

device and the far-end will be done through the Hub, so

no USB connection is needed.

Light Ring Activity

Slow red pulsing

Rapid red pulsing

(approx. two seconds)

Solid red ring

Full blue ring

turning off clockwise

Partial blue ring shifting

Directional blue light

Device Status

Single blue light

circulating counterclockwise

Device is muted

Device is being pinged

Device error

Device is booting up

Device is restarting

Device is adapting &

testing the environment

Direction of voice

pickup in progress

The Ecosystem

Ceiling

Wall

Hub Table Control

The following warranty statement is effective for all Stem Audio products as of May 1st, 2019. Stem

Audio warrants that this product is free of defects in both materials and workmanship. Should any part

of this product be defective, the Manufacturer agrees, at its option, to repair or replace with a like-new

replacement any defective part(s) free of charge (except transportation charges) for a period of two

years for all products. This warranty period begins on the date the end-user is invoiced for the product,

provided the end-user provides proof of purchase that the product is still within the warranty period

and returns the product within the warranty period to Stem Audio or an authorized Stem Audio dealer

according to the Product Return and Repair Policy listed below. All inbound shipping costs are the

responsibility of the end-user, Stem Audio will be responsible for all outbound shipping costs.

Product Return and Repair Policy

1. Return to seller if purchased through an authorized dealerProof of purchase date from reseller

within the warranty period must be provided by the end-userSeller may, at its discretion, provide an

immediate exchange or repair or may return the unit to the manufacturer for repair

2. Return to Manufacturer

a. An RMA (return merchandise authorization) number must be obtained by the end user from Stem

Audio

b. The end-user must return the product to Stem Audio with proof of purchase (showing purchase

date) for a warranty claim, and display the RMA number on the outside of the shipping package.

THIS WARRANTY IS VOID IF:

The product has been damaged by negligence, accident, act of God, or mishandling, or has not been

operated in accordance with the procedures described in the operating and technical instructions; or;

The product has been altered or repaired by other than the manufacturer or an authorized service

representative of the Manufacturer; or; Adaptations or accessories other than those manufactured or

provided by the Manufacturer have been made or attached to the product which, in the determination

of the Manufacturer, shall have affected the performance, safety or reliability of the product; or; The

product’s original serial number has been modified or removed.

NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE, APPLIES TO THE PRODUCT.

MANUFACTURER’S MAXIMUM LIABILITY HEREUNDER SHALL BE THE AMOUNT PAID BY THE END

USER FOR THE PRODUCT.

The manufacturer shall not be liable for punitive, consequential, or incidental damages, expenses, or

loss of revenue or property, inconvenience, or interruption in operation experienced by the end-user

due to a malfunction in the purchased product. No warranty service performed on any product shall

extend the applicable warranty period. This warranty extends only to the original end-user and is not

assignable or transferable. This warranty is governed by the laws of the State of California.

For more information or technical support please refer to our website www.stemaudio.com, email us at

customerservice@stemaudio.com, or call(949) 877-7836.

USB: USB Type B

Ethernet: RJ45 connector (requires PoE+)

Frequency response: 50Hz – 16KHz

Broadcast level (peak): 90dB SPL @ 1Khz from 1m (5 watts RMS)

Noise cancellation: > 15dB (without pumping noise)

100% full duplex – no attenuation (in either direction) during full duplex

High-end performance conforms to ITU-T G.167

Acoustic echo cancellation: > 40dB with conversion speed of 40dB/sec

Residual echo is suppressed to the environment noise level, preventing artificial

ducking of signal

Nine high-quality beamforming microphones

One speaker: 4 watts (RMS)

Direction-finding algorithm (determines the presence and direction of a speaker)

Beamforming algorithm (forms and directs audio beams towards a defined

direction)

Automatic voice-level adjustment (AGC)

Weight: 2.5 lbs. (1.1 kg)

Dimensions: Diameter: 7.75 in. (19.7 cm)Height: 3 in. (7.6 cm)

Power Consumption: PoE+ 802.3 at Type 2

Operating Systems: Windows 98 and up / Linux / MacOS.

AS/NZS CISPR 32:2015

EN 55032:2012/AC:2013

VCCI 32-1

FCC 15.109:2019

FCC 15.109(g):2019

ICES-003:2016 updated April 2017

Connectors

Specs

Complies with:

Light Ring Guide Warranty

Website:

Email: customerservice@stemaudio.com

Telephone: (949) 877-STEM (7836)

Product Quickstart Guides:

Product Setup Videos:

Need Some Help?

stemaudio.com/videos

stemaudio.com/manuals

stemaudio.com

Product Specs