Stenner Pumps Econ Installation manual

1. Select dry loc tion to mount p nel to void w ter intrusion. When selecting the
loc tion, note the w ter flow direction s indic ted on the flow meter. Loc tion
should llow mounting h rdw re to be nchored into studs or concrete to support
the weight of the p nel.
2. Isol te nd depressurize the w ter system.
3. M rk loc tion of l g bolt holes 14 1/4" bove center line of the horizont l pipe.
4. Secure w ll mount br cket to w ll studs using the included l g bolts or other
suit ble h rdw re. H ng p nel on to w ll mount br cket.
5. For convenience, the p nel h s 3/4" NPT (or 1" NPT) connections on the inlet nd
outlet. Connect the inlet nd outlet of the p nel to the w ter system.
6. Cut necess ry length of suction tubing nd connect to the suction side of the
pump. Secure the weighted str iner to one end nd secure the tubing to the pump
tube fitting with the provided nut nd ferrule. DO NOT use wrenches or thre d se l
t pe. Connection needs to be finger tightened.
7. Plug pump power cord into n ppropri te recept cle s specified in the pump
m nu l. Follow the wiring directions for your model nd pplic tion.
8. Prime the pump, per the instruction m nu l, nd observe the liquid being dr wn
from the solution t nk. When it re ches the injection point, discontinue priming.
9. Pressurize the system slowly, check for le ks, nd verify pump oper tion.
When pressurizing the system, gradually allow water to flow.
Shocking the meter by over speeding it with high flow rates can damage the
internal assembly.
Ensure the piping is properly aligned and supported both
upstream and downstream of the panel.
It is the installer’s responsibility to comply with all national and local plumbing
and electrical codes.
Limited W rr nty: This w rr nty pplies to the p nel system nd mounting items only. The Pump is covered
under sep r te w rr nty st ted in the product m nu ls included. The component m nuf cturers’ w rr nties
pply to the flow ssembly p rts such s meter, fittings, etc. Stenner Pump Comp ny will for period of one
(1) ye r from the d te of purch se (proof of purch se required) rep ir or repl ce – t our option – ll
defective p rts. Stenner Pump Comp ny is not responsible for ny remov l or inst ll tion costs. Stenner
Pump Comp ny will incur shipping costs for w rr nty products shipped from our f ctory in J cksonville,
Florid . Any t mpering with m jor components, chemic l d m ge, f ulty wiring, we ther conditions, power
surges, or products not used with re son ble c re nd m int ined in ccord nce with the instructions will
void the w rr nty. Stenner Pump Comp ny limits its li bility solely to the cost of the origin l product. We
m ke no other w rr nty expressed or implied.
W ll Mount Br cket
4
8
7
55
ECON METER SYSTEM START- P INSTR CTIONS
TO BE INSTALLED AND MAINTAINED BY PROPERLY TRAINED PROFESSIONAL INSTALLER ONLY. READ MAN AL & LABELS
FOR ALL SAFETY INFORMATION & INSTR CTIONS.
WARNING
Jacksonville, Florida USA www.stenner.com Stenner Pump Company All Rights ReservedSTENNER PUMP COMPANY
INSEMS 022619
This inform tion is not intended for specific pplic tion purposes. Stenner Pump Comp ny reserves the right to m ke ch nges to prices, products, nd specific tions t ny time without prior notice.

1. Seleccione un loc lid d sec donde inst l r el p nel p r evit r l intrusión de
gu . Al seleccion r l ubic ción, teng en cuent l dirección de flujo indic d en
el medidor de gu . L ubic ción deberá permitir l utiliz ción de h rdw re p r
segur r un mont je firme que soporte el peso del p nel.
2. Aísle y despresurice el sistem de gu .
3. M rque l ubic ción de los tornillos de soporte 14 y 1/4 pulg d s (36.2 cm) sobre
l líne horizont l de l tuberí .
4. Asegure el soporte de p red los gujeros m rc dos utiliz ndo los tornillos incluidos
u otros que se n p r este propósito. Cuelgue el p nel en el soporte de p red.
5. P r su convenienci , el p nel tiene conexiones de rosc de 3/4" NPT (o 1" NPT)
en mbos extremos; de entr d y s lid . Conecte los extremos de entr d y de s lid
l tuberí .
6. Corte l sección neces ri del tubo de succión y desc rg y conéctelo l extremo
de succión del c bez l del dosific dor. Utilice los c squillos y tuerc de conexión
incluidos. NO utilice pinz s o cint de tuberí ; solo juste con sus dedos. Inst le el
filtro con pes en el otro extremo del tubo de succión.
7. Enchufe el dosific dor en un receptáculo propi do como se especific en el
m nu l de instrucciones del dosific dor. Sig l s instrucciones de conexiones de su
modelo y plic ción.
8. Cebe el dosific dor como indic el m nu l y observe el líquido l ser succion do
del t nque. Cu ndo el líquido lleg l punto de inyección, deje de ceb r.
9. Presurice el sistem lent mente, cheque por pérdid s y verifique l oper ción
del equipo.
Al presurizar el sistema, permita un flujo de agua gradual. n
aumento de flujo repentino puede producir un shock del medidor y dañar partes
internas del sistema.
Asegúrese que la tubería esté alineada y sostenida correctamente
de ambos lados del panel.
Es la responsabilidad del instalador el cumplir con todos los códigos de
plomería y eléctricos locales y nacionales.
G r ntí Limit d : Est g r ntí se plic l p nel y su mont je sol mente. El dosific dor está b jo g r ntí
sep r d especific d en el m nu l incluido. L g r ntí de componentes de fábric cubren l s p rtes de
corriente de flujo como ser el medidor, l s conexiones, etc. Por un periodo de un (1) ño de l fech de
compr (se exige comprob nte de compr ), Stenner Pump Comp ny rep r rá o reempl z rá, su criterio,
tod s l s piez s defectuos s. Stenner no es respons ble de los costos de retiro o inst l ción. Stenner p g rá
los costos de envío de los productos en g r ntí desde nuestr fábric en J cksonville, Florid . Tod
m nipul ción de los componentes princip les, d ño c us do por productos químicos, c bles defectuosos,
condiciones climátic s, sobrec rg s de energí o productos que no se utilicen y m nteng n con debido
cuid do de cuerdo con l s instrucciones, nul rán l g r ntí . Stenner limit su respons bilid d
exclusiv mente l costo del producto origin l. No otorg mos ningun otr g r ntí , expres o implícit
Soporte de P red
4
8
7
55
INSTR CCIONES DE INICIO DEL SISTEMA DE PANEL ECON
ADVERTENCIA
INSTALACION DEBE SER REALIZADA Y MANTENIDA POR PROFESIONALES DEBIDAMENTE ENTRENADOS. LEA EL MAN AL
Y LAS ETIQ ETAS PARA OBTENER LAS INSTR CCIONES Y LA INFORMACION DE SEG RIDAD.
Jacksonville, Florida USA www.stenner.com Stenner Pump Company Derechos ReservadosSTENNER PUMP COMPANY
INSEMS 022619
Est inform ción no está previst con fines de plic ciones específic s. Stenner Pump Comp ny se reserv el derecho de efectu r c mbios en los precios, productos y especific ciones, en cu lquier momento y sin previo viso.
Table of contents
Languages:
Popular Measuring Instrument manuals by other brands

ROHDE & GRAHL
ROHDE & GRAHL R&S ZPH Series manual

GE
GE JXSOUSV1 owner's manual

Rohde & Schwarz
Rohde & Schwarz FS-K30 Software manual

Total Control Systems
Total Control Systems 700-20 Engineering manual

Endress+Hauser
Endress+Hauser Liquiline System CA80AM Brief operating instructions

Amprobe
Amprobe TMA10A user manual