Leupold RX-600 Series User manual

RX®-600 and RX-750 Series
Rangefinders
Complete Operation Manual

Leupold &Stevens
P.O. Box 688
Beaverton, OR 97075 USA
1 (800) LEUPOLD (538-7653)
Leupold &Stevens
14400 NW Greenbrier Parkway
Beaverton, OR 97006 USA
[phone]
Part # 59860 Artwork # 59736
www.leupold.com

Introduction .................................................. Page 1
Specifications ................................................. Page 8
Operation .................................................... Page 9
Cleaning/Maintenance......................................... Page 28
Helpful Hints for Using the Leupold
RX-600 / RX-750 Digital Laser Rangefinders ....................... Page 29
Warranty / Repair ............................................. Page 31
Table of Contents

1
Congratulations! You have purchased a Leupold
®
RX-600 / RX-750 Series digital
laser rangefinder that has been designed by Leupold’s engineers and designers
to be the best rangefinder on the market and to provide you with years of
solid performance in the field. Following are detailed instructions regarding the
proper use and employment of your RX rangefinder. To ensure top performance
for the life of the product, please read these instructions before operating your
RX-600 / RX-750.
Your new Leupold RX rangefinder is a revolutionary, range-finding device
that incorporates advanced digital electronics with state-of-the-art ballistics
algorithms. RX-600 / RX-750 features include inclinometer, multiple reticle
options, and Last Target Mode. However the truly innovative and unique
feature is True Ballistic Range
®
(TBR), which is available on the RX -750 model.
TBR algorithms were developed by the same engineers who developed Sierra
Infinity
®
Exterior Ballistics Software and who helped develop navigation and
guidance systems for ICBMs and other missiles with far more demanding
trajectory requirements than a hunting bullet. TBR is a marriage of laser ranging,
an inclinometer, and an advanced computerized ballistics program. The result
is distance measurements accurate within a yard, no matter the angle at which
the laser is fired. Bullets and arrows travel in a ballistic arc, yet conventional
Introduction

2
rangefinders only provide a linear distance to your target. TBR delivers the
ballistic equivalent range to the target, accounting for the effects of inclines or
declines on the path of your bullet or arrow. Other features that are provided for
firearms are outputs that display either MOA adjustments, or inches /centimeters
of holdover at that specific distance. TBR eliminates any potentially significant
error, and provides a precise range for your aiming calculations. TBR is matched
to seven rifle ballistics groups and three archery ballistics groups, allowing use
with most popular firearms and bows.
HOW THE RX-600 / RX-750 WORKS
The RX-600 and RX-750 are top-quality 6x22mm monoculars that incorporate the
additional benefit of a state-of-the-art laser rangefinder capable of measuring
the distance of a deer-sized animal from 5 yards to 400 yards (RX-600), 500 yards
(RX-750), an inanimate object from 5 yards to 500 yards (RX-600), 600 yards (RX-
750), and a reflective target from 5 yards to 600 yards (RX-600), 750 yards (RX-
750). The rangefinders emit a series of invisible, infrared energy pulses that are
reflected off the selected target back to the optical unit. State-of-the-art circuitry
and precision computing circuits are used to calculate the distance by measuring
the time it takes for each pulse to travel from the RX-600 / RX-750 to the object
and back.

3
The Leupold RX-600 and RX-750 6x22mm rangefinders employ an eye safe
FDA Class 1 and CE Class 3A laser in their operation. Even so, there are a few
precautions that are important to remember:
Do not depress the POWER button while aiming at a human eye or while•
looking into the optics from the objective side
Do not leave the rangefinders within the reach of small children•
Do not take the product apart as it has a self-protection device in the•
electronic control module and may cause an electric shock
Do not attempt to use any power source other than a CR2 battery•
(or equivalent) — the RX-600 and RX-750 rangefinders are designed to
prohibit accessing any other external power supply
Safety and Operation Precautions

4
RX-600/750 Features at a Glance
POWER
FOCUS
Laser Radiation: FDA Class 1 / CE Class 3A•
Measurement Range: 5 yds – 600 / 750 yds•
Measuring Time: Less than 1 second•
Auto Power Off after 7 seconds•
Power: CR2 battery or equivalent•
Battery Life: At least 3,000 measurements•
Accuracy: +/- 1 yard/meter•
The RX-600 / 750 are weatherproof•
-/+
RX-I
MODE
BATTERY

5
BAT TERY POWER STATUS INDICATOR
To determine your battery’s power level, look for the following indicators:
FULL – A full battery bar indicates your battery is at or near peak capacity.
HALF – A half-full bar indicates your battery has reached half-capacity.
LOW – If the battery bar is empty, yet there is still data displayed above the bar, the
battery is nearing the end of its life and should be replaced.
NO POWER – If the battery bar is empty, and there is no data displayed above the
bar, your battery is dead and you must replace it. The battery status bar will flash
and the unit will shut down when no power remains.
MEASURING DISTANCE WITH THE RX-600 / 750
Measurement of distance with the RX-600 / 750 is a very simple operation:
View the object of interest through the monocular.1.
Depress the POWER button to power up the unit.2.
Align the reticle over the object being viewed.3.
Depress the POWER button again – this will cause the laser to activate.4.
Read the distance as shown in the image field.5.

6
CONTINUOUS MEASUREMENT OF A MOVING TARGET / SCAN MODE:
Follow the instructions for “Measuring distance…” as explained previously.1.
Once the target has been measured, continue to hold down the POWER2.
button and follow the object as it moves.
The distance will automatically update as long as the POWER button is3.
continuously depressed.
This procedure can also be used to obtain the range of multiple animals4.
or objects; simply move the reticle from one target to another while
holding down the POWER button.
CLEARING THE LAST DISTANCE OBTAINED:
The last range reading does not need to be cleared before reading another
object’s distance. For that reason, there is no reset button. Simply aim at the
new object using the reticle, depress the POWER button and hold until the new
range reading is displayed.

7
Following is a reference table listing the ranges of the various models under
different conditions:
Surface texture, color, size, and shape of the target all affect reflectivity, which
in turn affects the maximum range of the instrument. As a rule of thumb,
brightly colored targets are much more reflective than darker targets. Tan
game coats are more reflective (and thus provide a more solid reading) than a
black roof. A shiny surface is more reflective than a dull surface. Smaller targets
are more difficult to range than larger targets. Light conditions, haze, fog, rain,
and other environmental conditions can all affect ranging performance. Any
factor which degrades air clarity will reduce the maximum effective range. The
sun generates infrared energy that can degrade ranging performance in bright
conditions or when ranging towards the sun.
MAXIMUM RANGE
CONDITION RX-600 RX-750
Reflective Target (yd/m)
600/550 750/685
Trees (yd/m)
500/455 600/550
Deer (yd/m)
400/365 500/455

8
Specifications
The RX-600 and RX-750 Series of digital laser rangefinders provides a variety of
useful modes to tailor performance to the conditions you experience in the field.
Model features are identified on the following pages.
RX-600 RX-750
Magnification
6× 6×
Inclinometer
No Yes
TBR (True Ballistic Range)
No Yes
Last Target Mode
No Yes
Line of Sight Distance (LOS)
Yes Yes
Yards / Meters Mode
Yes Yes
Scan Mode
Yes Yes
Battery Life >3,000 Actuations >3,000 Actuations
Weight
7.0 oz 7.0 oz
Dimension (Inches) 4.2 x 3.0 x 1.6 4.2 x 3.0 x 1.63
Battery Status Indicator
Yes Yes
Warranty
1 Year 1 Year
Weatherproof
Yes Yes
Accurate +/- 1 Yard @ <100 yds.
Yes Yes

9
QUICK SET MENU™
Operation
*Display shown with all possible modes visible
R
F
L
B
O
W
L
A
S
T
T
G
T

10
QUICK START MENU
When you initially push the POWER button, the unit is ready for scanning. To
enter the Quick Set MenuTM, press and hold the MODE button for at least 1
second.
To manipulate a function, press the MODE button until that function is
displayed, then use the POWER button to change the setting. If this is the last
function to be changed, you can allow the rangefinder to sit idle for 20 seconds
which will cause an automatic power-off, saving all selections. If additional
functions require manipulation, simply press MODE to continue through the
Quick Set Menu. Pressing and holding MODE for 1 second at any time will
save all changes, exit the Quick Set Menu, and prepare the rangefinder for
immediate use.
Note: Activating certain modes automatically disables other modes. For example
activating the yards mode will automatically deactivate the meters mode.

11
FUNCTION 1: RIFLE MODE (RFL)
(RX-750 MODEL ONLY)
TBR calculates the equivalent horizontal range
(level fire range) from which you can determine the
correct aim for the conditions. For example, if you
are shooting a .270 caliber, 130 grain bullet at 3,050
feet per second up a 30° incline at 400 yards, direct
line of sight, the TBR output will be 372 yards. The
first step in correctly using TBR is to Practice, Practice,
Practice. Anytime you handle a firearm or bow, you
are ultimately responsible for your projectile.
The inclinometer output is shown beside the LOS. The inclinometer output
will be disabled when RFL or BOW mode is turned off.
For rifle users, adjustment or holdover information can also be displayed. The
available settings are as follows: BAS outputs the equivalent range to use with
Leupold’s Ballistic Aiming System®reticles or the equivalent horizontal range,
Hold displays the inches or centimeters to hold over the intended point of
impact, and MOA displays the minute of angle correction to “dial” into your
scope.
R
F
L

12
For rifle users, RFL mode is comprised of three TBR
functions: HOLD, MOA, and BAS. One of these modes
must be selected. To select the desired function, navigate
through the Quick Set Menu until RFL is reached (activate
if necessary). While the RFL icon is highlighted and the
word “SEt” is shown in the upper display, press and release
POWER repeatedly to scroll through HOLD, MOA, and BAS
respectively; press MODE when the desired function is
displayed. For information regarding BOW settings, please
see pages 22-23.
BAS displays the equivalent horizontal range, which is based
upon the ballistics group and sight-in distance you will
choose in a later mode. This is the range you will want to use
when shooting, rather than the line of sight distance, which
may contain gross errors depending upon the shot angle.
Readings will be displayed with equivalent horizontal range.
The upper display shows the True Ballistic Range and the
lower display shows the line-of-sight distance to the target.
HOLD will display the appropriate amount of holdover to
use, which is based upon the ballistics group and sight-in
R
F
L
R
F
L
R
F
L

13
distance you will choose in a later mode. The upper display
shows whether you should hold Hi or Low, and the number
of inches or centimeters to be used for proper correction. For
example, a reading of “Hi, 8” means you should hold 8 inches
above the intended point of impact if measuring in yards. If
measuring in meters, you should hold 8 centimeters above the
intended point of impact. The lower display shows the line-of-
sight distance to the target.
MOA mode will show the minute-of-angle adjustment for
your target which is based upon the ballistics group and sight-
in distance you will choose in a later mode. The upper display
shows whether you should dial the scope’s adjustments Up
or Down, and the number of MOA to be used for proper
correction. For example, a reading of “Up, 4” means you
should dial 4 MOA in the up direction, then aim directly at
the intended point of impact. The lower display shows the
line-of-sight distance to the target.
NOTE: True Ballistic Range is available only in the RX-750
R
F
L
R
F
L
R
F
L

14
TBR (TRUE BALLISTIC RANGE): RIFLE
R
F
L

15
TBR (TRUE BALLISTIC RANGE): BOW
40 Yards (line of sight) at a 40° decline
B
O
W

16
FUNCTION 2: SEVEN RIFLE BALLISTICS GROUPS
(RX-750 MODEL ONLY)
TBR includes ballistics settings for seven rifle cartridge groups, which are displayed
as A, B, C, AB, AC, BC, and ABC. For example, if your cartridge type is in Group
A, the displayed reading will account for the shot angle and provide the
proper distance for holdover purposes (see following chart). You must choose
one of the seven groups, based on your cartridge and ballistics information.
TBR performance groups organize load performance in a way that generally
provides less than 2.5 inches (1/2 minute of angle) of error in aiming out to
500 yards. The cartridge table shows a common assortment of factory loads
organized in their TBR performance groups. If you are shooting a similar bullet
weight and muzzle velocity that falls into the provided selections, you can use
that mode with full confidence.

17
TBR PERFORMANCE GROUPS: CARTRIDGE TABLE
TBR
Group
Sight-In
Distance Cartridge Name Bullet Weight (grains)
Muzzle Velocity
(feet per second)
A300
Yards
.270 Weatherby Magnum 100 3760
Lazzeroni 7.21 Firebird 140 3640
.30-.378 Weatherby 165 3500
.30-.378 Weatherby 180 3450
.300 Weatherby Magnum 150 3450
B300
Yards
.240 Weatherby 87 3520
.240 Weatherby 100 3400
.270 Weatherby Magnum 130 3200
.270 Weatherby Magnum 150 3245
.270 Winchester Short Magnum 130 3250
7mm Shooting Times Westerner 140 3330
7mm Shooting Times Westerner 160 3050
7mm Weatherby Magnum 139 3340
7mm Weatherby Magnum 175 3070
7mm Winchester Short Magnum 140 3310
.300 Remington Ultra Magnum 180 3250
.300 Remington Ultra Magnum 200 3025
.300 Weatherby Magnum 180 3120
.300 Winchester Magnum 150 3280
.300 Winchester Magnum 180 2960
.300 Winchester Short Magnum 150 3300
.300 Winchester Short Magnum 180 3025
.338 Remington Ultra Magnum 180 3030
C200
Yards
.204 Ruger 32 4225
.204 Ruger 40 3090
.22-250 Remington 55 3650
.223 Remington 40 3700
continued on next page