stereo labs ZED User manual

ZED Box
Powered by NVIDIA® Jetson™
Quick Start Guide
8Features
1. Micro USB port
2. USB 3.0 port
3. HDMI port
4. USB 2.0 port
5. Power status LED
6. Network PoE+ port
7. +12V AC/DC
Power adapter port
Product support and manuals
Getting started
Help center
Contact Stereolabs
Computer model
Store
© 2021 Stereolabs 2021-10
stereolabs.com/docs
stereolabs.com/developers
stereolabs.com/hc
[email protected]
ZED Box
NVIDIA® Jetson™ Xavier NX (XNX)
NVIDIA® Jetson™ TX2-NX (TX2NX)
7Install the ZED Box with brackets
Screw the brackets
to the ZED Box
Screw the ZED Box
to the wall *
* Screws for the wall are
not included
stereolabs.com/store/
1 2 3 4 5 6 7

3Connect to your display
Connect to your display
using the HDMI port
4Connect your keyboard and mouse
1Plug in the power supply
Connect the provided
power supply to the jack
connector if you do not
use PoE+ feature
5Complete the operating system setup 6Connect your sensor
Connect your keyboard
and mouse using the 2.0
USB port and a USB hub
NVIDIA® Jetson™ embeds Linux for Tegra.
To access the operating system, use the following access credentials :
Identifier : user
Password : admin
Warning : Your sensor
needs to be connected to
the USB 3.0 port of the
ZED Box
2Connect to your network
Connect to your network
using the PoE+ Ethernet
port. PoE+ switch is
needed to power the
system in this way