Sterling Plumbing 72040106 User manual

Features
•Compression molded from our exclusive solid Vikrell
®
material
•10-year consumer/3-year commercial limited warranty
•Tongue-and-groove 3-piece modular design allows for
easy ″snap together″installation
•Durable high-gloss finish
•Tile design
•Wall surround allows for attachment of grab bars
•40-1/4″(102.2 cm) x 40-1/4″(102.2 cm) x 80-3/8″
(204.2 cm) unit rough-in dimensions include flange
•39″(99.1 cm) x 39″(99.1 cm) x 79-1/8″(201 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ASTM E162
•ASTM E662
•CSA B45.5/IAPMO Z124
•HUD, UM Bulletin 73A
•NAHB Research Foundation, Inc.
39″NEO-ANGLE SHOWER BASE,
SURROUND & BACKER BOARDS
72040106
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72040106 39″(99.1 cm) neo-angle shower base and wall surround with backer boards ❑0❑Other_____
Model Component Description Colors/Finishes
72041100 39″(99.1 cm) neo-angle shower base only ❑0❑Other_____
Model Wall Component Description Colors/Finishes
72044106 Complete wall set with backer boards ❑0❑Other_____
INTRIGUETM
Page 1 of 2
1065818-4-B
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING

Technical Information
Model door maximum
width
door maximum
height
72040106 15-7/8″(40.3 cm) x
27-3/8″(69.5 cm) x
15-7/8″(40.3 cm)
74″(188 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
installation.
Attach grab bars at the specified backer board locations only.
17-7/16"
(44.3 cm)
17-7/16"
(44.3 cm)
40-1/4"
(102.2 cm)
40-1/4" (102.2 cm)
14"
(35.6 cm)
14"
(35.6 cm)
12"
(30.5 cm)
12" (30.5 cm)
2" (5.1 cm) Drain Hole
8" (20.3 cm) 8" (20.3 cm)
31" (78.7 cm)
1-1/4" (3.2 cm)
27-3/8"
(69.5 cm)
39"
(99.1 cm)
4-7/8"
(12.4 cm)
40-1/4"
(102.2 cm)
80-3/8"
(204.2 cm)
Recommended Roofing
Nail Locations (4 total)
74-1/4"
(188 cm)
5-1/2" (14 cm) D.
Drain Cutout
Backer board locations
Left End Wall
22" (55.9 cm)
1" (2.5 cm)
below Grout
Line
10" (25.4 cm)
3.5" (8.9 cm)
18" (45.7 cm) 3" (7.6 cm)
from Corner
Note: Right end wall is the same as left end wall, only mirrored.
18"
(45.7 cm)
Grab Bar
24" (61 cm)
Grab Bar
Product Diagram
INTRIGUETM
INTRIGUETM 39″NEO-ANGLE SHOWER BASE, SURROUND & BACKER BOARDS
Page2of2
1065818-4-B