Sterling Bath/Shower Whirlpool System 76090110 User manual

Features
•Compression molded from our exclusive solid Vikrell
®
material
•Tongue-and-groove 4-piece modular design allows for
easy ″snap together″installation
•Durable high-gloss finish
•5 Jets
•10-year consumer/3-year commercial limited warranty
•Pump with air switch and grounding-type plug-in cord
•15″(38.1 cm) bath whirlpool depth (floor to top of
threshold)
•60-1/4″(153 cm) x 31-1/2″(80 cm) x 73-1/2″
(186.7 cm) complete unit rough-in dimensions include
flange
•60″(152.4 cm) x 30″(76.2 cm) x 72″(182.9 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ASME A112.19.7
•ASTM E162
•ASTM E662
•CSA B45.5/IAPMO Z124
•NAHB Research Foundation, Inc.
•UL 1795
60″(152.4 cm) WHIRLPOOL BATH
AND WALL SURROUND
76090110
ALSO 76090120
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
76090110 60″(152.4 cm) whirlpool bath and wall surround, left drain ❑0❑Other_____
76090120 60″(152.4 cm) whirlpool bath and wall surround, right drain ❑0❑Other_____
Model Component Description Colors/Finishes
76091110 60″(152.4 cm) whirlpool bath only, left drain ❑0❑Other_____
76091120 60″(152.4 cm) whirlpool bath only, right drain ❑0❑Other_____
Model Wall Component Description Colors/Finishes
71094100 Complete wall set ❑0❑Other_____
ACCLAIMTM
Page 1 of 2
1016903-4-K
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING

Technical Information
Fixture*:
Basin area:
Bathing well 44″(111.8 cm) x 16″(40.6 cm)
Top area 56″(142.2 cm) x 23-1/2″(59.7 cm)
To overflow:
Water depth 12″(30.5 cm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Model door maximum
width
door maximum
height
76090110
76090120
58-1/2″(148.6 cm) 56-1/2″(143.5 cm)
* Varies with alternative walls.
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Pump is supplied with a grounding-type plug-in cord. Locate
the outlet behind the whirlpool, and within 24″(61 cm) of the
pump.
Pump access opening is required.
Do not disassemble the pump or piping as this could void the
warranty.
Size the drain cutout to fit the drain assembly that will be
used.
Studs should be positioned roughly as shown.
Adjacent finished wall thickness must not exceed 9/16″
(1.4 cm).
3" (7.6 cm)
30" (76.2 cm)
15" (38.1 cm)
60" (152.4 cm)
8-3/4" (22.2 cm)
30" (76.2 cm) 16" (40.6 cm)
4" (10.2 cm)
Drain Cutout
2-3/4" (7 cm)
Overflow Detail
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
19"
(48.3 cm)
18"
(45.7 cm)
73-1/2"
(186.7 cm)
54"
(137.2 cm)
1-1/2"
(3.8 cm)
1-1/2"
(3.8 cm)
1-1/2"
(3.8 cm)
31-1/2"
(80 cm)
22-1/4"
(56.5 cm)
8"
(20.3 cm)
14"
(35.6 cm)
6" (15.2 cm)
(Typical)
Access
Opening
3-1/2"
(8.9 cm)
Pump
Motor
Location
31-1/2"
(80 cm) 2" (5.1 cm) D.
Drain
14-1/4"
(36.2 cm)
8"
(20.3 cm)
18" (45.7 cm) W
x 15" (38.1 cm) H
Access Panel
Product Diagram
ACCLAIMTM
ACCLAIMTM 60″(152.4 cm) WHIRLPOOL BATH AND WALL SURROUND
Page2of2
1016903-4-K