Sterling Bath/Shower System 71090110 User manual

Features
•Compression molded from our exclusive solid Vikrell
®
material
•Tongue-and-groove 4-piece modular design allows for
easy ″snap together″installation
•Durable high-gloss finish
•10-year consumer/3-year commercial limited warranty
•Installation with wall surrounds is the only
recommended installation
•15″(38.1 cm) bath depth (floor to top of threshold)
•60-1/4″(153 cm) x 31-1/2″(80 cm) x 73-1/2″
(186.7 cm) complete unit rough-in dimensions include
flanges
•60″(152.4 cm) x 30″(76.2 cm) x 72″(182.9 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ASTM E162
•ASTM E662
•CSA B45.5/IAPMO Z124
•HUD, UM Bulletin 73A
•NAHB Research Foundation, Inc.
60″(152.4 cm) BATH AND WALL
SURROUND
71090110
ALSO 71090120, 71090410, 71090420
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
71090110 60″(152.4 cm) bath and wall surround, left drain ❑0❑Other_____
71090120 60″(152.4 cm) bath and wall surround, right drain ❑0❑Other_____
71090410 60″(152.4 cm) bath and wall surround, 4 pack, left drain ❑0❑Other_____
71090420 60″(152.4 cm) bath and wall surround, 4 pack, right drain ❑0❑Other_____
Model Component Description Colors/Finishes
71091110 60″(152.4 cm) bath only, left drain ❑0❑Other_____
71091120 60″(152.4 cm) bath only, right drain ❑0❑Other_____
71091410 60″(152.4 cm) bath only, 4 pack, left drain ❑0❑Other_____
71091420 60″(152.4 cm) bath only, 4 pack, right drain ❑0❑Other_____
Model Wall Component Description Colors/Finishes
71094100 Complete wall set ❑0❑Other_____
ACCLAIMTM
Page 1 of 2
1020183-4-H
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING

Technical Information
Fixture*:
Basin area:
Bathing well 42″(106.7 cm) x 16-1/4″(41.3 cm)
Top area 56″(142.2 cm) x 23-3/4″(60.3 cm)
To overflow:
Water depth 12″(30.5 cm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71090110
71090120
71090410
71090420
58-1/2″(148.4 cm) 56-1/2″(143.5 cm)
71091110
71091120
71091410
71091420
58-1/2″(148.4 cm)* NA*
* Varies with alternative walls.
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if apron nailing-in flanges are to
be used.
Studs should be positioned roughly as shown.
Adjacent finished wall thickness must not exceed 9/16″
(1.4 cm).
15" (38.1 cm)
3" (7.6 cm)
1-1/2" (3.8 cm)
60" (152.4 cm)
4" (10.2 cm)
30" (76.2 cm)
Drain Cutout
2-3/4" (7 cm)
Overflow Detail
19" (48.3 cm)
6" (15.2 cm)
(Typical)
14"
(35.6 cm)
14"
(35.6 cm)
16"
(40.6 cm)
22-1/4"
(56.5 cm)
8"
(20.3 cm)
8"
(20.3 cm)
14-1/4"
(36.2 cm)
2" (5.1 cm) D.
Drain
3-1/2"
(8.9 cm)
8-3/4"
(22.2 cm)
18"
(45.7 cm)
60-1/8"(152.7 cm) Min
60-1/4" (153 cm) Max
31-1/2"
(80 cm)
31-1/2"
(80 cm)
30"
(76.2 cm)
54"
(137.2 cm)
73-1/2"
(186.7 cm)
1-1/2"
(3.8 cm)
Product Diagram
ACCLAIMTM
ACCLAIMTM 60″(152.4 cm) BATH AND WALL SURROUND
Page2of2
1020183-4-H