Sterling 60" (152.4 cm) Bath/Shower System with Backer Boards... User manual

Features
•Compression molded from our exclusive solid Vikrell
®
material
•Bath and integral apron eliminates installation step
•Tongue-and-groove 4-piece modular design allows for
easy ″snap together″installation
•Durable high-gloss finish
•10-year consumer/3-year commercial limited warranty
•Wall surround allows for attachment of grab bars
•60″(152.4 cm) x 31-1/4″(79.4 cm) x 73-1/4″(186.1
cm) complete unit rough-in dimensions includes
flange
•60″(152.4 cm) x 30″(76.2 cm) x 72″(182.9 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ASTM E162
•ASTM E662
•CSA B45.5/IAPMO Z124
•HUD, UM Bulletin 73A
•NAHB Research Foundation, Inc.
60″(152.4 cm) BATH/SHOWER
SYSTEM WITH BACKER BOARDS
61030116
ALSO 61030126
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
61030116 60″(152.4 cm) bath/shower and wall surround with backer boards, left drain ❑0❑Other_____
61030126 60″(152.4 cm) bath/shower and wall surround with backer boards, right drain ❑0❑Other_____
Model Wall Component Description Colors/Finishes
61034106 Complete wall set with backer boards ❑0❑Other_____
ADVANTAGETM
Page 1 of 2
1065808-4-B
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING

Technical Information
Fixture*:
Bathing well 56-3/4″(144.1 cm) x 25-1/4″(64.1 cm)
Top area 60″(152.4 cm) x 30-5/8″(77.8 cm)
To overflow:
Water depth 9-3/8″(23.8 cm)
Capacity 42 gal (159 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
61030116
61030126
56-3/4″
(144.1 cm)
57″
(144.8 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Attach grab bars at the specified backer board locations only.
60"
(152.4 cm)
73-1/4"
(186.1 cm)
1-5/8"
(4.1 cm)
30"
(76.2 cm)
31-1/4"
(79.4 cm)
18"
(45.7 cm)
17-5/16"
(44 cm)
17"
(43.2 cm)
7-3/4"
(19.7 cm)
22-1/4"
(56.5 cm)
31-1/4"
(79.4 cm)
4-1/8"
(10.5 cm) 1-1/4"
(3.2 cm)
1-1/4"
(3.2 cm)
15"
(38.1 cm)
3-1/2"
(8.9 cm)
17"
(43.2 cm)
30" (76.2 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
2" (5.1 cm)
D. Drain
Drain Cutout
8"
(20.3 cm)
4"
(10.2 cm)
Recommended Support
Clip or Roofing Nail
Location (5 Total)
14-1/4"
(36.2 cm)
8"
(20.3 cm)
3-1/2"
(8.9 cm)
10"
(25.4 cm)
1"
(2.5 cm)
22"
(55.9 cm)
Back Wall
End Wall
Backer board locations
Note: Right and left end walls are
the same, only mirrored.
2" (5.1 cm)
19"
(48.3 cm)
3-1/2" (55.9 cm)
2"
(5.1 cm)
46"
(116.8 cm)
18"
(45.7 cm)
Grab Bar
24"
(61 cm)
Grab Bar
24" (61 cm) -
36" (91.4 cm)
Grab Bar
14" (35.6 cm)
2-1/2" (6.4 cm)
Overflow
Detail
Product Diagram
ADVANTAGETM
ADVANTAGETM 60″(152.4 cm) BATH/SHOWER SYSTEM WITH BACKER BOARDS
Page2of2
1065808-4-B