Stiga Stig 300 User manual
EN
Stig 300
Stig 600
Stig 1200
Instruction manual
ii INDEX EN
INDEX
1. MODELS AND TECHNICAL DATA 1
1.1. MODELS...................................................................................................................................................... 1
............................................................................................................... 2
2. SAFETY 3
2.1. SAFETY INFORMATION ............................................................................................................................. 3
2.2. SAFETY INSTRUCTIONS ........................................................................................................................... 5
......................................................................................................................5
2.2.2. FUNCTIONS .........................................................................................................................................................5
.......................... 7
3. INTRODUCTION 8
....................................................................................................................... 8
3.1.1. PURPOSE OF THE MANUAL................................................................................................................................8
...................................................................................8
................................................................................................................................ 9
....................................................................................................................................9
3.2.2. MAIN COMPONENTS ........................................................................................................................................ 10
..............................................................................................................................................11
................................................................................................................ 12
............................................................. 13
4. INSTALLATION 14
..................................................................................... 14
4.2. INSTALLATION COMPONENTS............................................................................................................... 14
4.3. ISTALLATION REQUIREMENTS CHECK................................................................................................. 15
.................................................................................................................................. 15
............................... 15
.......................................... 17
......................................................................... 19
................................................................................................................... 19
............................................................................................................................ 21
.................................................................. 23
4.5. COMPONENTS INSTALLATION............................................................................................................... 23
.................................................................................................. 24
................................................................................................................ 25
.................................................................................................................... 26
4.5.4. RESISTOR INSTALLATION FOR SMALL PERIMETERS.................................................................................. 28
.................................................................... 29
...............................................................................................................................30
5. FUNCTIONS 39
........................................... 39
.................................................................... 40
................................................. 41
............................................................................................................................ 41
iiiEN INDEX
................................................................................................................... 42
................................................. 42
...... 43
.................................................. 45
....................................................................................................... 45
.................................................................................... 46
............................................................................ 46
................................................................................................................. 47
..............................................................................................................................47
........................................................................................................... 48
6. MAINTENANCE 49
6.1. SCHEDULED MAINTANANCE ................................................................................................................. 49
.............................................................................................................................. 50
....................................................................................................... 52
............................................................................. 53
....................................................................................................................... 53
......................................................................................................... 55
8.1. TRANSPORT .............................................................................................................................................57
..................................................................................................................................................57
8.3. DISPOSAL.................................................................................................................................................57
9. ACCESSORIES 58
.......................................................................................................................... 59
11. EC DECLARATION OF CONFORMITY 60
1EN 1. MODELS AND TECHNICAL DATA
1. MODELS AND TECHNICAL DATA
1.1. MODELS
This manual refers to the models Stig 300, Stig 600, Stig 1200.
2EN
1. MODELS AND TECHNICAL DATA
1.2.
SPECIFICATIONS UNIT OF
MEASURE
Dimensions (WxHxD) [mm] 413 x 252 x 560 413 x 252 x 560 413 x 252 x 560
Weight of the robot lawn mower [kg] 7.4 7.6 8
Cutting height (Min-Max) [mm] 20-60 20-60 20-60
Blade diameter [mm] 180 180 180
Cutting speed [rpm] 2850+/-50 2850+/-50 2850+/-50
Speed of movement [m/min] 22 22 22
Maximum slope % 45 45 45
Maximum slope along the perimeter % 20 20 20
Type of electric traction motor - Brushless Brushless Brushless
Type of cutting system - 4 pivoting cutting
blades
4 pivoting cutting
blades
4 pivoting cutting
blades
Cutting device code - 322104105/0 322104105/0 322104105/0
Type of electric cutting motor - Brushless Brushless Brushless
Sound power level detected [dB] (A) 57 57 57
Uncertainty of noise emissions, KWA [dB] (A) 1.47 1.47 1.47
Sound power level guaranteed [dB] (A) 59 59 59
Acoustic level audible by the
operator
[dB] (A) 46.3 46.3 46.3
IP rating of the robot lawn mower - IPX5 IPX5 IPX5
IP rating of the charging station - IPX1 IPX1 IPX1
IP rating of the power supply - IP67 IP67 IP67
Robot lawn mower operating
ambient temperature [° C]
°C 0 - 50 0 - 50 0 - 50
Charging station operating ambient
temperature [° C]
°C -10 - 50 -10 - 50 -10 - 50
Power supply ambient operating
temperature [° C]
°C -10 - 50 -10 - 50 -10 - 40
Work capacity [m²] 300 600 1200
Power supply
- Input: 100-240vac
1.2 A
Output: 30Vcc 2A
Input: 100-240vac
1.2 A
Output: 30Vcc 2A
Input: 100-240vac
1.2 A
Output: 30Vcc 2A
Battery model - 25.2 - 25.9 V
2 Ah
25.2 - 25.9 V
2.5 Ah
25.2 - 25.9 V
5 Ah
Charging time [min] 60 80 150
Bluetooth - 4.2 4.2 4.2
3EN 2. SAFETY
2. SAFETY
2.1. SAFETY INFORMATION
In the design of the device, special attention has been paid to aspects that can cause risks to the safety
and health of people.The purpose of this information is to sensitize users to prevent any risk, avoiding
behaviours that do not comply with the regulations reported.
4EN
2. SAFETY
5EN 2. SAFETY
2.2. SAFETY INSTRUCTIONS
2.2.1.
a. Read the instructions carefully, learn the controls and the correct use of the machine.
b. Never allow children, persons with reduced physical, sensory or mental capabilities, or lack of expe-
rience and knowledge, or persons unfamiliar with these instructions, to operate the machine. Local
regulations may limit the age of the operator.
c. The operator, or user, is to be held responsible for accidents or hazards involving third parties or third
party equipment.
a. Make sure that the automatic system of perimeter delimitation is installed correctly as indicated.
b. Periodically check the area where the machine is used and remove stones, sticks, cables and any other
foreign objects that may interfere with its operation.
c. Periodically carry out a visual inspection of the blades, blade bolts and of the cutting unit to check that
they are not worn out or damaged.Replace worn out or damaged blades and bolts in pairs to maintain
the balance of the machine.
d. Warning signs must be placed around the working area of the machine if it is used in public areas or
areas open to the public. Signs must read as follows: “Warning! Automatic lawn mower! Keep away
from the machine! Children must be supervised!”
2.2.2. OPERATION
a. Do not operate the machine with defective guards or safety devices that are not present, for example
without protections.
b. Do not put hands or feet near or under the rotating parts. Always keep away from the drain opening.
c. Do not touch any moving parts of the machine until they have come to a complete stop.
d. Always wear sturdy shoes and long trousers when operating the machine.
e. Never lift or transport the machine when the motor is running.
f. Remove the disabling device from the unit:
- Before removing an obstruction;
- Before checking, cleaning or working on the machine.
g. Do not leave the machine in operation unattended in the presence of pets, children or other people
nearby.
a. Tighten all nuts, bolts and screws securely for safe operation of the machine.
b. Frequently check the robot lawn mower for wear or deterioration.
c. For safety reasons it is necessary to replace worn out or damaged parts.
d. Make sure that the blades are replaced only with suitable spare parts.
e. Make sure the batteries are recharged using the correct charger recommended by the manufacturer.
Incorrect use can cause electric shock, overheating or leakage of corrosive liquid from the battery.
f. In case of electrolyte leaks, wash with water / neutralizing agent and consult a doctor in case of contact
with eyes, etc.
g. Machine maintenance must be carried out in accordance with the manufacturer's instructions.
6EN
2. SAFETY
NOTE: It is recommended to use only original products supplied by the manufacturer. Non-
original or inadequate products can cause damage to the robot lawn mower or can be
dangerous for people, animals and things.
a. The battery should only be installed and / or removed from the robot lawn mower by the retailer or a
service centre.
b. Store the unused battery in a safe place away from sources of heat or objects that can cause short
circuits (pegs, screws, metal objects of various kinds).
c.
d. Transport the battery and the battery charger in the original packaging.
NOTE: Safeguarding the environment must be a relevant and priority aspect of machine use, of
a. Dispose of packaging and damaged parts as required by local regulations in the country of use.
b. Dispose of electrical equipment (robot lawn mower, battery, power supplies, etc.) as per European
Directive 2020/19 / EU and in compliance with the national standards. For further information on the
disposal, contact your retailer or a domestic waste collection service.
c. Separate collection of products and packaging is recommended.
7EN 2. SAFETY
2.3.
• Safety key
1. Press the “STOP” (A) button to stop the robot lawn mower safely and open the protective cover (B).
2.
3. Close the protective cover (B).
4.
C
A
B
8 EN
3. INTRODUCTION
3. INTRODUCTION
3.1.
3.1.1. PURPOSE OF THE MANUAL
This manual is an integral part of the device and it is intended to provide the information necessary for its
use.
Keep this manual for the entire life of the device, so that it is always available in case of need.
The recipient of the manual is the user of the device, who is required to carefully read the information
contained therein and apply it rigorously to protect people's safety and to avoid damage.
The information is drawn up in the original language of the manufacturer (Italian) and translated into any
other languages for legislative and/or commercial needs.
The following symbols have been adopted to highlight important texts.
NOTE: The texts shown in this form indicate technical information of particular importance,
which should not be ignored.
3.1.2.
For better readability of the user manual, it is recommended to keep the smartphone in an horizontal
position, as shown in the picture.
1.2 Panoramica del prodotto
1.2.1 Descrizione generale
Il robot rasaerba (1) è progettato e costruito per rasare automaticamente
l’erba di giardini in qualunque ora del giorno e della notte.
In funzione delle diverse caratteristiche della supercie da rasare, il robot
può essere programmato in modo da lavorare su più aree.
In fase di lavoro, il robot eettua la rasatura dell’area delimitata dal lo
perimetrale (2).
1.2 Panoramica del prodotto
1.2.1 Descrizione generale
Il robot rasaerba (1) è progettato e costru
l’erba di giardini in qualunque ora del gio
In funzione delle diverse caratteristiche d
può essere programmato in modo da lav
In fase di lavoro, il robot eettua la rasatu
perimetrale (2).
9EN 3. INTRODUCTION
3.2.
3.2.1.
The robot lawn mower (A) is designed and built to automatically cut garden grass at any time of day and
night.
programmed to work on several areas delimited by the perimeter cable.
When operating, the robot lawn mower mows the area delimited by the perimeter cable (B).
When the robot lawn mower detects the perimeter cable (B) or encounters an obstacle (C) it changes
trajectory randomly.
Based on the random operation principle, the robot lawn mower mows the delimited lawn automatically
and completely.
Any other usage may be hazardous and harm persons and/or damage things. Improper use includes (for
example, but not limited to): transporting people, children or animals on the machine; being transported by
the machine; using the machine to pull or push loads; using the machine for cutting non-grass vegetation.
A
C B
A
10 EN
3. INTRODUCTION
(A) Robot lawn mower
() Charging base
(C) Starter kit
(D) Battery (inside the robot lawn mower)
(E) Charging base power supply
(C1) Instruction manual
(C2
(C3
(C4) Charging Base connectors
(C5) App Lock Label
(C6) Joint for perimeter cable
(C7) Safety key
3.2.2. MAIN COMPONENTS
APP LOCK
AC1 C2 C3
C
BC4 C5 C6
C7
D E
11EN 3. INTRODUCTION
•
(F) Perimeter cable
(
(H) joint for perimeter cable
(I) Charging base connectors
See Chapter 9 “Accessories”
3.3.
Below all the steps to perform the correct unpacking are described:
1. Open the box of the robot lawn mower;
2. Take out the " Starter Kit” box;
3. Take out the upper containment carton;
4. Take out the robot lawn mower;
5. Take out the charging base.
1 2 3
4 5
FGH I
12 EN
3. INTRODUCTION
3.4.
Below all the symbols on the robot lawn mower are listed:
0
13EN 3. INTRODUCTION
3.5.
The criteria used for the preparation of this document are described below.
1. Topic title (A)
2. Requirements and equipment for carrying out the procedure (B)
3. Description of the procedure (C)
4. Descriptive pictures of the procedure (D)
5. App section title (E)
6. App navigation procedure (F)
All the symbols on the Battery are shown below:
11IT 2. SICUREZZA
2.3. ISTRUZIONI DI SICUREZZA PER IL FUNZIONAMENTO
Requisiti e attrezzatura:
• Consolle di comando
• Chiave di sicurezza
Procedura:
1. -
mette il funzionamento del Robot.
2.
di protezione (C) della consolle di comando (D).
3.
Robot.
4.
5.
i sensori di inclinazione (Inclinometro) arrestano il robot.
6.
A
B
C
D
IT28 3. INSTALLAZIONE
NOTA:
Le immagini riportate per questa sezione sono puramente indicative.
Dalla pagina (A) è possibile raggiungere le seguenti sezioni:
• Prelogin
• Concierge
• Onboarding
• Sing Up
•
3.10.2. PRELOGIN
1. Premere sul campo (B) per accedere alla pagina di visualizzazione dei rivenditori (C).
2. Autorizzare l’App all’uso del GPS del telefono.
3. Premere sul campo del rivenditore desiderato (D) per accedervi.
4. Premere sul campo di ricerca (E) per eseguire una eventuale ricerca libera del rivenditore.
E
F
14 EN
4. INSTALLATION
4. INSTALLATION
4.1.
4.2. INSTALLATION COMPONENTS
(A) Charging Base
(B) Power supply
(C) Perimeter cable (included in the installation Kit)
(F) Joint for perimeter cable (included in the installation Kit)
See Chapter 9 “Accessories”
ABC
DF GE
15EN 4. INSTALLATION
4.3. VERIFICATION OF THE INSTALLATION REQUIREMENTS
Below the procedures to check the necessary requirements and prepare the garden before proceeding
with the installation are described.
4.3.1.
• Carry out a survey of the entire area for a correct detection of the state of the garden, of any
obstacles and areas to be excluded.
• Check that the lawn to be mowed is uniform, free of holes, stones or other obstacles and, if
necessary, carry out the appropriate environmental decontamination works.
NOTE: Level the ground so that no puddles form as a result of rain.
of the robot lawn mower: 20-60 mm. If necessary, prepare the garden using a traditional lawn
mower.
4.3.2.
1.
largest portion of the garden and near an electrical outlet.
2. Make sure there is enough space to install the charging base on a straight section of the perimeter
cable (B), so that the distance of the base from any curves is at least X = 200 cm; the ground must
A
C
B
xx
16 EN
4. INSTALLATION
4. Prepare the power supply installation area (B) so that in no weather conditions it can be immersed in
water.
NOTE: It is preferable and recommended to install the power supply (B) in a closed
compartment protected from atmospheric agents, in a position that is not easily accessible by
unauthorized persons such as children (X> 160 cm).
3. Make sure that the area chosen for installing the charging base (D) is at least 400 cm away from the
charging base (E) of a possible second robot lawn mower.
D
E
B
x
This manual suits for next models
2
Table of contents
Languages:
Other Stiga Lawn Mower manuals
Stiga
Stiga TURBO 48 S ROLLER User manual
Stiga
Stiga MULTICLIP 48 RENTAL User manual
Stiga
Stiga TORNADO 51 SE User manual
Stiga
Stiga stig User manual
Stiga
Stiga PLUS User manual
Stiga
Stiga MP2 500 Li D48 Series User manual
Stiga
Stiga 8211-0288-01 User manual
Stiga
Stiga TURBO 48 S ROLLER User manual
Stiga
Stiga DECK VILLA 107 M EL User manual
Stiga
Stiga CR 434 Series User manual
Stiga
Stiga Park series User manual
Stiga
Stiga VILLA 14 HST User manual
Stiga
Stiga MULTICLIP 50 RENTAL User manual
Stiga
Stiga Park series User manual
Stiga
Stiga TORNADO 45 TORNADO 45 User manual
Stiga
Stiga Turbo 47 S Ethanol Combi User manual
Stiga
Stiga EL 340 User manual
Stiga
Stiga PARK COMPACT User manual
Stiga
Stiga 110 Combi Pro User manual
Stiga
Stiga Park series User manual
Popular Lawn Mower manuals by other brands
Snapper
Snapper 12.5 Gear Operator's manual
Mowox
Mowox PM 4030 P Original operating instructions
Cub Cadet
Cub Cadet CC 550 ES Operator's manual
Flymo
Flymo VISIMO VM032 Important information
Gravely
Gravely 885005 - 40" Mower Owner's/operator's manual
Snapper
Snapper HWPS26700BV Safety instructions & operator's manual