STILFORD PROFESSIONAL 2 ERGONOMIC EXTRA HEAVY DUTY CHAIR... User manual
PROFESSIONAL 2 ERGONOMIC EXTRA
HEAVY DUTY CHAIR
1/10
JBPROFM2BK
ASSEMBLY INSTRUCTIONS
Weight capacity: 160kgs
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
1CTN
15
2/10
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
• Please check you have all hardware before assembly.
• If you are missing any hardware, please contact Kyvas on (03) 9310 3011 or email
• Please ensure you have the name of the item, required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
.
NOTE
• Do not tighten screws before all screws are in the right place.
• Do not use this product unless all bolts, screws and knobs are firmly secured.
• Check that all bolts, screws and knobs are securely tightened at least every 4 months.
CAUTION
• If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
• Failure to follow these warnings could result in serious injury
WARNING
• CHILDREN MUST BE SUPERVISED.
DANGER
Assembly Video
• To view an assembly video, go to https://www.officeworks.com.au
• Search the product by item code or name:
• Click on the icon to watch the video.
Tools Required
CAUTION: Do not use tools other than those required, as this can damage your new item.
Please ensure drill is set to torque 5Nm.
(03) 9310 3011
G
(5/16" x 3/4") H(1/4" x 1-1/4")
x 1
x 3 x 6
I
3/10
x1
x1 x5
x1 x2
x1
FRONT
D
E
E
F
4/10
Note: Turn over the Star Base (E) and insert Gas Lift (D) into the centre hole of Star Base (E).
Note: Push the castors (F) firmly into hole at the end of each leg.
H
6 Pcs
1/4" x 1-1/4" Bolt
used to complete
this step.
C-R C-L
B
D
B
Note: Place assembled seat on the Gas Lift (D). Push down firmly until connection is secure.
5/10
H
I
Torque 5 Nm
C-L
C-R
FRONT
H
6IKey
Only applicable for when using a drill. Set torque to 5Nm.
Do not tighten Screws fully until you have completed assembly.
Note: Align Back Cushion (A) with Seat Cushion (B) by GENTLY inserting J-bar into the rear
hole of the Seat Plate (B) as shown and TIGHTEN by using 3 x screws (G). When using
a drill set the torque to 5Nm to avoid over-tightening. Before using your chair, ensure that
all the screws are tightened fully for safety.
Note: Extend the J-bar by holding the backrest with one hand and pull the bottom of J-bar
with other hand.
G
3 Pcs
5/16" x 3/4" Bolt
used to complete
this step.
6/10
A
B
A
J-bar
J-bar
A
G
I
6
Remark: For assembly the J-bar needs to be
extended as shown in the diagram.
Torque 5 Nm
Your Professional 2 Ergonomic Extra Heavy Duty Chair is now complete and ready for use.
IMPORTANT NOTE: Periodically check and re-tighten screws
7/10
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
.
Care Instructions
7
• Vacuum regularly.
• To maintain the appearance of non-upholstered parts, wipe the surface with a clean cloth
dampened with a mild soap solution.
• Spot clean with upholstery shampoo or dry powdered cleaner only. Test on a concealed area
before proceeding. Apply proprietary cleaning products strictly according to instructions.
• Do not saturate fabric or interior with water or other cleaning products.
• Treat spills immediately with an absorbent cloth by blotting the spill.
• Persistent stains may require treatment by a professional cleaner.
• Do not use detergents, solvents or abrasive cleaners.
• Keep away and protect from direct sunlight and heat.
• Avoid contact with skin, in particular during high temperatures and humidity.
• Piling may occur as a result of daily wear. This is not a manufacturing fault and can be
removed by using a Fabric Pill Remover. De-pilling removes unsightly loose surface fibres
and does not affect fabric performance.
• Clean, check and tighten parts regularly.
8/10
45-70cm
Neck
Wrists
Shoulders
Low Back
CORRECT SITTING POSTURE
COMPUTER WORKSTATION ERGONOMICS
MONITOR
Adjust distance and height: top of the monitor at
eye-level and slightly tilted.
ARMS
Relax shoulders. Forearms parallel to the floor.
Minimal bend at the wrist.
CHAIR
Your back should be straight and well supported.
LEGS
Thighs parallel to the floor.
FEET
Parallel to the floor. Use a footrest if necessary.
The human body is not designed to do repetitive tasks or maintain a posture for extended periods of time. However,
in most workplace situations this is hard to avoid.
Not maintaining correct posture or taking regular breaks can contribute to common conditions such as headaches,
neck pain, back pain/stiffness and wrist and forearm pain. This is not the fault of the product.
To help support your body at your workstation and minimise pain and strain please refer to the above diagram.
TAKE
BREAKS
EVERY 25
MINS
90-120°
90-120°
90-120°
SETTING UP YOUR WORKSTATION
WRONG SITTING POSTURE
Seat Slide
-
-
SEAT
SLIDE
9/10
Adjustable Tilt Tension Control
4
7
5
6
7
1
3
2
4
1
2
3
5
6
HOW TO USE YOUR CHAIR
Arm Height
Seat Tilt
Gas-Lift Height
Back Height
Back Tilt
10/10
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
Warranty 15 years
Product Warranty – valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as
intended for 15 years from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the Warranty Period,
Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:
to cosmetic damage;
to damage caused by consumables used in connection with the product (such as
cleaning products);
where the product has not been used in accordance with all provided instructions;
to damage arising from fair wear and tear;
where the product has not been subject to reasonable use;
where the product has been intentionally or negligently damaged; and/or
if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your receipt or
proof of purchase to your nearest Officeworks store or contact 1300 633 423.
This warranty is provided in addition to any rights you may be entitled to under the
Competitions & Consumer Act 2010.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
●
●
●
●
●
●
●
Other manuals for PROFESSIONAL 2 ERGONOMIC EXTRA HEAVY DUTY CHAIR...
1
Table of contents
Other STILFORD Indoor Furnishing manuals
STILFORD
STILFORD JBST3DPDWE/BK User manual
STILFORD
STILFORD S2 User manual
STILFORD
STILFORD JBSMOD12WE User manual
STILFORD
STILFORD STRND90WEK User manual
STILFORD
STILFORD ASHTON 3 JBASH3PED User manual
STILFORD
STILFORD STPROESSMB User manual
STILFORD
STILFORD JBSCR75WBK User manual
STILFORD
STILFORD STP12RMWEK User manual
STILFORD
STILFORD STRND12WEK User manual
STILFORD
STILFORD STPR15FBKT User manual
STILFORD
STILFORD S2RT7560 User manual
STILFORD
STILFORD ASHTON ASHBKCSEKT User manual
STILFORD
STILFORD STPMR24WEK User manual
STILFORD
STILFORD ELECTRIC HEIGHT ADJUSTABLE DESK S2 User manual
STILFORD
STILFORD S2 Electric Sit Stand Desk User manual
STILFORD
STILFORD JBSPCS12WN User manual
STILFORD
STILFORD ASHTON JBASH2DCAB User manual
STILFORD
STILFORD PROFESSIONAL 2 ERGONOMIC EXTRA HEAVY DUTY CHAIR... User manual
STILFORD
STILFORD Professional Meeting Room Table 1200... User manual
STILFORD
STILFORD JBSTBK18OA User manual
Popular Indoor Furnishing manuals by other brands
Furniture of America
Furniture of America YNJ-2081C35 Assembly instructions
J.Burrows
J.Burrows JBPROESSMW Assembly instructions
Home Decorators Collection
Home Decorators Collection FG-SHL5PCFC Use and care guide
Tresanti
Tresanti ODP34128 manual
Pearl
Pearl Roselyn user manual
BUT
BUT 4894223210447 Assembly instructions
