stilum intera 3 User manual

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten State: 26.09.16 p. 1
Mounting instructions for wendy house „intera 3“
Item No. 51 5522 401
Diagram 1: Overall view of play equipment

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten State: 26.09.16 p. 2
Mounting instructions for wendy house „intera 3“
Item No. 51 5522 401
1800
500
2350
2950
800
950
450
1600
850
600
150 100
550
400
Beton
Concrete
Füllmaterial
Filling
Erde/Grund
Ground
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
0179-00-00
18.03.2016
Fertigung:
Mattheis
1x
Gewicht:
8874952.6
intera3
Zust. Änderung Datum Name
Abmaße:
Fundament
MaM 18.07.2016 0179-02-06 aktualisiert a
1800
500
2350
2950
800
950
450
1600
850
600
150 100
550
400
Beton
Concrete
Füllmaterial
Filling
Erde/Grund
Ground
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
0179-00-00
18.03.2016
Fertigung:
Mattheis
1x
Gewicht:
8874952.6
intera3
Zust. Änderung Datum Name
Abmaße:
Fundament
MaM 18.07.2016 0179-02-06 aktualisiert a
play level
1. Select the play equipment location in consideration of the required safety
area (see Diagram 3: 3850mm x 5800mm).
2. Carry out excavation work for foundation as shown in Diagram 2a and 3a.
After excavation, compress the foundation oor.
Note: The wendy house is built in on the play level. Pay attention to items
marked „game level” of play equipment!
3. Set up 2 concrete foundations (LxWxH 1800 x 850 x 500 mm and
LxWxH 600 x 600 x 500 mm) acc. to the dimensions indicated in diagram 2
in the quality class C 20/25.
4. After a setting period of 10-14 days, depending on weather conditions and
foundation size - clean the surface of the foundations and start with the instal-
lation of the wendy house equipment.
5. Place the barrel at the main foundation and the bow at the smaller foundation
as shown in diagram 1 and 2 and do a rough align.
Note: Do not screw the base plates onto the foundations yet!
Diagram 2: Rear view with dimension details „intera 3“
Reinforcement plan:
Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten State: 26.09.16 p. 3
Mounting instructions for wendy house „intera 3“
Item No. 51 5522 401
5800
3850
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
0179-00-00
03.03.2016
Abmaße:
Fertigung:
Behnke
1x
Gewicht:
68728.0
intera3
Draufsicht
6. Connect the climbing net with the ton at one side and the bow at the other
side. Please fasten the parts using the screws including in the delivery.
7. Align the play equipment more on the foundations.
Note: The climbing net should be placed with tension.
8. Drill holes into all foundations and screw the play equipment into the founda-
tions with the included heavy-duty dowels.
9. Fill up and compress the holes between the foundation and the foundation
hole with the excavation.
10. Seal the foundation with the safety cover required for the height of fall
indicated.
Critical drop height: 500 mm.
Recommended surface material: grass, sand, wood chip, gravel,
synth. fall protection.
11. After 3 months, check the screws at the joints and retighten them if
necessary.
12. Do not allow children to use the equipment before the installation has been
nished.
Diagram 3: Top view „intera 3“

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten State: 26.09.16 p. 4
Mounting instructions for wendy house „intera 3“
Item No. 51 5522 401
Attention: If the play equipment has been incompletely installed or
partly dismantled when carrying out maintenance and repair work, this
may lead to particular risks of injury for the user. For this reason, make
clearly visible that the equipment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless
steel should not come with „normal“ steel parts in contact. Those steel
parts may rub off and leave small steel particles in combination with mois-
ture brown rust stains. If such corrosion occur on stainless steel parts,
they are ne to remove with an abrasive (240 grit).
Please take care when transporting and setting up the fact that the com-
ponents are made of stainless steel with no „normal“ steel parts in contact.
In order to preserve a good visual appearance of your stilum playground
equipment over a long period one should take care of maintenance of the
stainless surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall, should be frequent-
ly cleaned from dirt and deposits due to air pollution and dirt caused by the
atmosphere. Light soiling can easily be removed by using a high pressure
cleaner. For persistent deposits use a clean cloth moistened with a special
liquid cleaner (e.g. on phosphoric acid) and rinse off with clear water after
a short application time.
During cleaning with mild abrasive components, only wipe over stainless steel
surface in polishing direction. For heavily soiled surfaces, polishes can be
used (e.g. for cleaning chrome on cars) or for greasy and oily dirt alcoholic
cleaning agents and solvents (e.g. ethyl alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the
surface again. Do not use any chloride or hydrochloric containing cleaning
products nor scouring powder, bleaching - or silver polish cleaner. Cleaning
intervals depend on type and degree of soiling as well as on demands made
on optical characteristics. Therefore cleaning is advisable at intervals of six to
twelve months – whereby in the case of strong soiling it is appropriate to clean
the playground equipment at intervals of 3 to 6 months.