stilum Lilly User manual

Mounting instructions for toddler element „Lilly“
Item-No. 51 5556 401
© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 10.07.2019 p. 1
Diagram 1: Overall view of the play equipment

Mounting instructions for toddler element „Lilly“
Item-No. 51 5556 401
© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 10.07.2019 p. 2
Diagram 2: Side view with dimension details „Lilly“
Play level
concrete foundation
1. Select the play equipment location in consideration of the required safety
area (see diagram 3: Ø 3700 mm).
2. Carry out excavation work for the foundation as shown in diagram 2.
After excavation compress the foundation oor.
Note: The play equipment is built in at play level.
3. Set up the concrete foundation acc. to the dimensions indicated with central,
horizontal reinforcement.
4. After a setting period of 10-14 days, depending on weather conditions and
foundation size, clean the surface of the foundations. Place the equipment
onto the foundation.
5. Screw it onto the foundation using the heavy duty dowels included in the
delivery.
6. Seal the foundation with the safety cover required for the height of fall indica-
ted. Set up impact-absorbing playground surfacing according to EN 1176-1.
Critical drop height: 300mm
Recommended surface material: grass, sand, wood chip, gravel, synth. fall
protection.
7. Do not allow children to use the equipment before the installation has been
nished.
Reinforcement plan: Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C20/25
420
645
80
262
255
B
B
B-B
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
Lilly
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:10
A3
Gewicht
Name
Name
Fundamentplan
1207-00-00
33.7 Maßstab
Schramm 22.03.18
A Fundament verkleinert 10.07.19 SI
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende

Mounting instructions for toddler element „Lilly“
Item-No. 51 5556 401
© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 10.07.2019 p. 3
Diagram 3: Top view „Lilly“
Extent of the minimum
zone = safety area
3700
1528
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
Lilly
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:20
A3
Gewicht
Name
Name
Draufsicht
1207-00-00
33.7 Maßstab
Schramm 22.03.18
A Fallraum vergrößert 10.07.19 SI
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to par-
ticular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are ne with an abrasive
(240 grit) to remove.
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.