Stoll Milan Fire Table Operation manual

Milan Fire Tables
Assembly & Installation
Installation & User Guide
Installer please leave this with homeowner

Thank You!
Thank you for purchasing a Stoll Fire Table! We are condent this quality
product will last you for years to come. If you need further help or additional
information regarding installation, please reach out to your local dealer for
assistance.
Shell Assembly
Lay the countertop face down on a soft/non-abrasive surface to ensure it does not
scratch.
Using the provided self-tapping screws, attach both side panels and the end panel to the
countertop. Install the side panels so the gas valve punch-out is near the access drawer
section for ease of access. Screw hole locations are pre-drilled in each panel and the
correlating edge of the countertop to ensure proper alignment.
Included Parts & Tools
The following parts and tools are included with your Fire Table.
Side Panels: 2
End Panel: 1 (The end panel and drawer panel both contain handle cutouts. The drawer
panel is slightly smaller, and does not have pre-drilled holes along the top)
Drawer Face Panel: 1 (See note above)
Drawer Bottom Plate: 1
Countertop: 1
Corner Bracket: 4
Self-Tapping Metal Screws: 50
Leveling Legs: 4
Fire Table Assembly

Fasten the corners of each panel together using the provided screws.
Shell Assembly Continued
Once all of the panels have been installed, insert 2 of the corner brackets into the
remaining section, and fasten in place as shown.

The drawer slides are pre-installed on each side of the access drawer. Remove the outer
slide bracket from each side, and install them in place inside the opening for the access
drawer. Hole locations are pre-drilled in each panel to ensure proper alignment.
Access Drawer Assembly
Leveling System
Install the leveling legs through the threaded grommets in each corner.

Access Drawer Assembly
Fasten 2 corner brackets to the drawer face panel as shown. Then install the corner
brackets and face panel on the bottom drawer plate.

Access Drawer Installation
Turn the re table over and place it on the leveling legs. Install the assembled drawer by
inserting the drawer slides into the corresponding slide trays.

Burner & Gas Valve Installation
Your countertop is pre-cut to the specications provided for your specic burner. Following
the instructions provided by the burner manufacturer, install your burner into the countertop.
Each Fire Table comes with a knock-out for a standard gas valve coupling, and a knock-out
for an electric ignition switch (if applicable). Locate and remove the gas valve knock-out. If
your burner has an electric ignition system, remove the ignition knock-out as well. Fold out the
valve post wings as shown, and install the gas shutoff valve.

This product can expose you to chemicals
including Carbon Black, which is known to
the state of California to cause Cancer.
For more information go to
www.P65Warnings.ca.gov
• Excessive heat can cause damage to the nish. If the appropriate windshield is not used,
damage caused by overheating is considered abuse and is not covered under warranty.
• Your Fire Table can be cleaned using a damp cloth and soap or mild household cleaner,
or rubbing alcohol for tougher stains. To avoid damage to the nish, abrasive cleaning
products and cleaners containing ammonia or other harsh chemicals should be avoided.
For 3rd party burners and components, please follow the manufacturers instructions for
cleaning and maintenance.
• It is recommended to wax your Fire Table at least once a year to help protect the nish
against wear and fading. Any common car wax can be used.
Operation & Maintenance
Warranty
Your Stoll Products are covered by a 3 year limited warranty. For more information, please
visit www.stollindustries.com/resources. All warranty claims must be placed through your
local dealer.
If you purchased a burner through Stoll Industries, it is warrantied by Firegear Outdoors.
Stainless steel burners and pans are covered by a lifetime warranty, and additional
components such as gas valves are covered by a 5 year warranty. Please contact Firegear
Outdoors for any issues or warranty claims related to these products, and not Stoll
Industries.
Firegear Outdoors: 800-966-8126 ~ info@regearoutdoors.com
Photos of Completed Products
We would love to see pictures of your nished and installed project! Please send images to
[e-mail]. High quality images will likely be featured on our social media
or website!