Stoltzen SHC-001 User manual

Stoltzen 4K HDMI Controller
SHC-001
Version: V1.0
User Manual

Stoltzen 4K HDMI Controller

Stoltzen 4K HDMI Controller
SAFETY PRECAUTIONS
Please read all the instructions carefully before using this equipment.
1. Please use only the power supply / power cord packed together with this equipment.
Using other power supplies might cause fire, shock, or damage to the equipment.
2. Keep the power cord from being stepped on or pinched.
3. Use only accessories recommended by manufacturer.
4. Install / place this equipment in place with adequate ventilation.
5. Keep the unit away from water, excessive humidity, or sudden temperature changes.
6. Keep the unit away from fire, or heat source, including other units which may produce
heat.
7. Do not block any vents of the housing of the unit.
8. Do not spill any liquid on or into the unit.
9. Unplug the power cord before cleaning, and use dry clothes only.
10. Unplug the power cord when lightning or not used for a long period of time.
11. Do not attempt to open the unit, or do any adjustments not described in this manual.
12. Refer all servicing to qualified personnel.

Stoltzen 4K HDMI Controller
Contents
1. Introduction.................................................................................................................1
2. Package Contents ......................................................................................................1
3. Features......................................................................................................................1
4. Panel Descriptions......................................................................................................1
4.1 Front Panel........................................................................................................1
4.2 Rear Panel.........................................................................................................2
5. Connection Diagram...................................................................................................2
6. Operation - Programming and Setting........................................................................3
6.1 Program and Set the HDMI Controller via software (Microsoft Windows System
Only)........................................................................................................................3
6.2 Program and Set the HDMI Controller via RS232.............................................6
7. Specifications..............................................................................................................9

Stoltzen 4K HDMI Controller
1
1. Introduction
The Stoltzen SHC-001 is an HDMI controller that it provides intelligent automatically
control to your presentations. It detects HDMI signal comes in and then automatically
sends power on command to power on the projector; and when presentation is over it
sends power off command to shut off the projector in certain time as programmed.
It is such a smart system that is ideal for classroom, training room, board room, small
meeting room, etc.
2. Package Contents
1 x SHC-001 unit
1 x Power supply, DC 5V 1A
2 x Mount ears
2 x Screws (for the mount ears)
1 x User manual
3. Features
Programmable - Configure RS232 commands of different projectors
Timing Setting - Set different time for trigger the RS232 commands sending
Accurate Input Detection - Detect HDMI signal (not only +5V) to trigger commands
more correctly
Auto and Manual Trigger - Can send the commands automatically / manually
HDMI Input Setting - Set HDMI input active / inactive
HDMI Output Setting - Set HDMI output on / off
Support HDMI 1.4, resolution up to 4K@60Hz (4:2:0)
Support HDCP 2.2
4. Panel Descriptions
4.1 Front Panel

Stoltzen 4K HDMI Controller
2
○
1 Power LED - Lights when the unit is powered on.
4.2 Rear Panel
○
2 HDMI Output Port - Connects to the projector.
○
1 RS232-2 - Sends RS232 commands to control projector.
○
2 RS232-1 - Program / set the HDMI Controller.
○
3 HDMI Input Port - Connects to HDMI source device such as PC.
5. Connection Diagram
○
4 Power Input - Connects to the DC 5V power supply.

Stoltzen 4K HDMI Controller
3
6. Operation - Programming and Setting
6.1 Program and Set the HDMI Controller via software (Microsoft
Windows System Only)
Power on the HDMI Controller, connect it to a PC by RS232-1, open the software HDMI
Controller.exe on the PC, and now you can control it with the software.
6.1.1 Connection
Click the Com Setup button, select the right com port of your PC on the dropdown
menu. There are 24 com ports for selection.
Other settings
Connect Type - Serial
Baud Rate - 115200
Stop Bits - 1
Odd/Even - none
Click the Connect button, it changes to Disconnect, means the connection is
successful.

Stoltzen 4K HDMI Controller
4
6.1.2 Program
1) Select the right baud rate of the projector.
There are 11 baud rates for selection: 115200, 57600, 56000, 43000, 38400, 28800,
19200, 9600, 4800, 2400, 1200
2) Set the commands for power on and power off the projector
ex. Set Power On command of the projector PON[cr][lf], type PON\r\n, then click the
Set button, then command is set in the HDMI Controller.

Stoltzen 4K HDMI Controller
5
Note1: The commands can be Max. 128 Byte.
Note2: [cr] has to be changed to \r and [lf] has to be changed to \n when set in the
HDMI Controller.
After set the commands, click the Send button, it will send the command out through
RS232-2 to the projector right away.
If you want to set the Hex command, tick the Hex Format.
3) Set auto trigger time
After set the power on and power off commands, you can set the auto trigger time on
the dropdown menu. When it detects HDMI signal inputs / HDMI input signal disappears,
it will send out the power on / power off command in certain time automatically as set.
There are 7 times selectable for the auto power on setting, including Instant, 1 Second,
3 Seconds, 5 Seconds, 10 Seconds, 30 Seconds, 1 Minute;
And 6 for the auto power off setting, including Instant, 10 Seconds, 30 Seconds, 1
Minute, 3 Minutes, 5 Minutes
6.1.3 Setting and Control

Stoltzen 4K HDMI Controller
6
Current Setting
HDMI Input - Active: The HDMI Input is active, it accept HDMI signal input.
HDMI Input - Inactive: The HDMI Input is inactive, it does not accept HDMI signal input.
HDMI Output - On: The HDMI Output is on.
HDMI Output - Off: The HDMI Output is off.
Auto Trigger - Enable: It auto trigger to send power on / power off commands as set.
Auto Trigger - Disable: It does not auto trigger to send power on / power off commands
as set, only sends out the commands manually.
Default Setting
HDMI Input - Active: When re-power on the HDMI Controller, the HDMI Input is active,
accept HDMI signal input.
HDMI Input - Inactive: When re-power on the HDMI Controller, the HDMI Input is
inactive, it does not accept HDMI signal input.
HDMI Output - On: When re-power on the HDMI Controller, the HDMI Output is on.
HDMI Output - Off: When re-power on the HDMI Controller, the HDMI Output is off.
Auto Trigger - Enable: When re-power on the HDMI Controller, it is set as to auto trigger
to send power on / power off commands as set.
Auto Trigger - Disable: When re-power on the HDMI Controller, it is set as to does not
auto trigger to send power on / power off commands as set, only sends out the
commands manually.
6.1.4 ReFresh
The ReFresh button is for checking the setting status of the HDMI Controller.
6.2 Program and Set the HDMI Controller via RS232
It also can program and set the HDMI Controller by RS232.
Baud rate: 115200 Data bits: 8 Parity: none Stop bits: 1
# Command Function Response
1 SBR:x[cr][lf]
Set baud rate of the projector
x=115200, 57600, 56000, 43000, 38400,
28800, 19200, 9600, 4800, 2400, 1200
SBR:x[cr][lf]
2 CBR[cr][lf] Check the baud rate of the projector (set in
HDMI Controller) CBR:x[cr][lf]

Stoltzen 4K HDMI Controller
7
3 PONC:x[cr][lf]
Set the power on command of the projector
to HDMI Controller
x=the command (max. 128 Byte)
Note: when x includes [cr], [lf], have to
change [cr] to \r, [lf] changes to \n
PONC:x[cr][lf]
4 CPONC[cr][lf] Check the power on command of the
projector (set in HDMI Controller) CPONC:x[cr][lf]
5 PON[cr][lf] Send power on command (as set) to power
on projector PON[cr][lf]
6 PONATT:x[cr][lf]
Set the auto trigger time for power on
projector
x=I, 1S, 3S, 5S, 10S, 30S, 1M
I for Instant, S for second, M for minute
PONATT:x[cr][lf]
7 CPONATT[cr][lf] Check the auto trigger time of power on the
projector CPONATT:x[cr][lf]
8 POFFC:x[cr][lf]
Set the power off command of the projector
to HDMI Controller
x=the command (max. 128 Byte)
Note: when x includes [cr], [lf], have to
change [cr] to \r, [lf] changes to \n
POFFC:x[cr][lf]
9 CPOFFC[cr][lf] Check the power off command of the
projector (set in HDMI Controller) CPOFFC:x[cr][lf]
10 POFF[cr][lf] Send power off command (as set) to power
off projector POFF[cr][lf]
11 SPOFFATT:x[cr][lf]
Set the auto trigger time to power on
projector
x=I, 10S, 30S, 1M, 3M, 5M
I for Instant, S for second, M for minute
SPOFFATT:x[cr][lf]
12 CPOFFATT[cr][lf] Check the auto trigger time of power off the
projector CPOFFATT:x[cr][lf]
13 HIA[cr][lf] HDMI input active HIA[cr][lf]

Stoltzen 4K HDMI Controller
8
14 HII[cr][lf] HDMI input inactive HII[cr][lf]
15 CHI[cr][lf] Check the HDMI input channel status CHI:ACTIVE[cr][lf]
CHI:INACTIVE[cr][lf]
16 DHIA[cr][lf] Default HDMI input active DHIA[cr][lf]
17 DHII[cr][lf] Default HDMI input inactive DHII[cr][lf]
18 CDHI[cr][lf] Check the default setting of the HDMI input
channel status
CDHI:ACTIVE[cr][lf]
CDHI:INACTIVE[cr][lf]
19 ATE[cr][lf] Auto trigger enable ATE[cr][lf]
20 ATD[cr][lf] Auto trigger disable ATD[cr][lf]
21 CAT[cr][lf] Check the auto trigger status CAT:ACTIVE[cr][lf]
CAT:INACTIVE[cr][lf]
22 DATE[cr][lf] Default auto trigger enable DATE[cr][lf]
23 DATD[cr][lf] Default auto trigger disable DATD[cr][lf]
24 CDAT[cr][lf] Check the default setting of the auto trigger
status
DCAT:ACTIVE[cr][lf]
DCAT:INACTIVE[cr][lf]
25 HOON[cr][lf] HDMI output on HOON[cr][lf]
26 HOOFF[cr][lf] HDMI output off HOOFF[cr][lf]
27 CHO[cr][lf] Check the HDMI output status CHO:ACTIVE[cr][lf]
CHO:INACTIVE[cr][lf]
28 DHOON[cr][lf] Default HDMI output on DHOON[cr][lf]
29 DHOOFF[cr][lf] Default HDMI output off DHOOFF[cr][lf]
30 CDHO[cr][lf] Check the default setting of the HDMI
output status
CDHO:ACTIVE[cr][lf]
CDHO:INACTIVE[cr][lf]

Stoltzen 4K HDMI Controller
9
7. Specifications
Input 1 × HDMI
Outputs 1 × HDMI
Bandwidth 10.2Gbps
HDMI HDMI 1.4
HDCP HDCP 1.4, HDCP 2.2
HDMI Resolution Up to 3840x2160@60Hz (4:2:0)
RS232 2 x 3pin phoenix pole
Operating Temperature -10˚C ~ +50˚C / 14˚F ~ 122˚F
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Operating Humidity 20~ 90% RH (non-condensing)
Storage Humidity 20 ~90% RH (non-condensing)
Power Supply DC 5V 1A
Power Consumption Max. 0.83W
Chassis Material Aluminum
Dimensions W105 x D79 x H20 (mm) / W4.13 x D3.11 x H0.79 (inch)
Weight 123g / 0.27lb

Stoltzen 4K HDMI Controller

Stoltzen 4K HDMI Controller