Stoltzen SHE70K User manual

Stoltzen SHE70K
HDBaseT Extender Set 70m, 4K
All Rights Reserved
Version: SHE70K_2016V1.0
User Manual

Stoltzen SHE70K HDBaseT Extender Set
Preface
Read this user manual carefully before using this product. Pictures shown in this manual
is for reference only, different model and specifications are subject to real product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till July 2016.Any changes of functions
and parameters since then will be informed separately. Please refer to the dealers for
the latest details.
All product function is valid till 2016-7-21.
Trademarks
Product model, Stoltzen and its logo Stoltzen are trademarks of Stoltzen. Any other
trademarks mentioned in this manual are acknowledged as the properties of the
trademark owner. No part of this publication may be copied or reproduced without the
prior written consent of Stoltzen.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

Stoltzen SHE70K HDBaseT Extender Set
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

Stoltzen SHE70K HDBaseT Extender Set
Contents
1. Introduction.................................................................................................................1
1.1 Introduction to SHE70K.....................................................................................1
1.2 Features ............................................................................................................1
1.3 Package List......................................................................................................1
2. Introduction of Product Appearance............................................................................2
2.1 Appearance of SHE70T.....................................................................................2
2.2 Appearance of SHE70R ....................................................................................3
3. System Connection.....................................................................................................4
3.1 Usage Precautions............................................................................................4
3.2 System Diagram................................................................................................4
3.3 Connection Procedure.......................................................................................4
3.4 Application.........................................................................................................5
3.5 Twisted Pair Cable Connection..........................................................................5
4. Specification ...............................................................................................................6
4.1 Supported Resolution........................................................................................7
5. Panel Drawing ............................................................................................................8
6. Troubleshooting & Maintenance .................................................................................9
7. After-sales Service....................................................................................................10

Stoltzen SHE70K HDBaseT Extender Set
1
1. Introduction
1.1 Introduction to SHE70K
The extender set consists of a transmitter and receiver pair. HDMI signals are input into
the transmitter and HDBaseT technology is used to transmit the signals to the receiver
up to 70 m via a Cat5e/Cat6 cable. The receiver then outputs the HDMI signal.
Bi-directional IR is also transmitted across the Cat5e/Cat6 cable. The extender set
supports PoC, which can be used to power the receiver via the Cat5e/Cat6 cable. This
eliminates the need for power at the receiver end.
1.2 Features
Supports full HD: Delivers high-resolution image (1080p 3D, 4Kx2K)
Maximum transmission distance is 230 ft. (70 m) for 1080p and 131 ft. (40m) for
4Kx2K over single CAT5e/CAT6 cable
High Bandwidth: 10.2Gps.
HDTV Compatible, use HDMI 1.4 and HDCP2.2 compliant.
Support PoC & CEC.
Uses HDBaseT technology for extended capability and reliability
Bi-directional IR control
LED indicators show work status.
Note: Please use a CAT5e cable with low impedance (Shielded twisted pair will be
better and should be well grounded)for good transmission effect.
1.3 Package List
1 x SHE70K (including SHE70T and SHE70R)
4 x detachable mounting ears
4 x screws
8 x plastic cushions
1 x power adapter (DC 12V 1A)
1 x user manual
Notes:Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.

Stoltzen SHE70K HDBaseT Extender Set
2
2. Introduction of Product Appearance
2.1 Appearance of SHE70T
1) HDMI IN: Connect to HDMI source.
2) IR IN: Connect to an IR receiver, the IR signal received from this port can only
send out via SHE70R.
3) IR OUT: Connect with IR emitter, the sent IR signals are received by SHE70R.
4) Power Indicator: illuminate when power up
5) DC 12V: Connect with power supply, energize both SHE70T and SHE70R (PoC
solution) synchronously.
6) TP OUT: Connect to the TP IN socket on the SHE70R via CAT5e/ CAT6 cable.

Stoltzen SHE70K HDBaseT Extender Set
3
2.2 Appearance of SHE70R
1) HDMI Out: Connect to HDMI display.
2) IR IN: Connect to an IR receiver, the IR signal received from this port can only
send out via SHE70T.
3) IR OUT: Connect with IR emitter, the sent IR signals are received by SHE70T.
4) Power Indicator: illuminate when power up
5) TP IN: Connect to the HDBaseT port on the SHE70T via CAT5e/ CAT6 cable.
Note: SHE70K boasts 2 indicators to show real-time operation information:
Indicator
Function
Details
Green
Show input signal
connection
Connected:
HDCP Compliant: Illuminate;
Not HDCP Compliant: Blink.
Disconnected: Off
Yellow
Indicate linking status of
the transmitter and the
receiver
Connected: Illuminate
Disconnected: Off

Stoltzen SHE70K HDBaseT Extender Set
4
3. System Connection
3.1 Usage Precautions
1) System should be installed in a clean environment and has a prop temperature and
humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated and
safety.
3) All devices should be connected before power on.
4) The Cat5e/Cat6 terminations for HDBaseT devices should be a straight-thru TIA/EIA
T568B standard.
3.2 System Diagram
3.3 Connection Procedure
Step1.Connect HDMI source (such as Blue-ray DVD) to HDMI In port of the transmitter
with an HDMI cable.
Step2.Connect TP OUT port of the transmitter to TP IN port of the receiver through a
CAT5e/CAT6 cable.
Step3.Connect a HDMI displayer (such as HDTV) to HDMI Out port of the receiver with
HDMI cable.
Step4.When using the bi-directional IR control, do the following.
a) Connect the IR emitter at either end to the IR OUT port on either the
transmitter or the receiver.
b) When using a powered IR receiver, connect via a 3.5 mm stereo plug to the
IR IN on either the receiver or the transmitter.
Step5.Connect with DC 12V power adaptor to the power port of SHE70T, SHE70R will
be energized synchronously with PoC solution.
HDTV
DVD
IR Remote
CAT5e/CAT6
SHE70T
SHE70R

Stoltzen SHE70K HDBaseT Extender Set
5
3.4 Application
SHE70K has a good application in various occasions, such as computer realm,
monitoring, big screen displaying, meeting room, education and bank & securities
institution etc.
3.5 Twisted Pair Cable Connection
The Cat5e/Cat6 terminations for HDBaseT devices should be a straight thru
TIA/EIAT568B standard. TIA/EIA T568A standard is NOT recommended.
Note: To make a better transmission, cable connectors MUST be metallic, the shielded
layer of cable MUST be connected to the connector’s metal shell.
TIA/EIA T568A
TIA/EIA T568B
Pin
Cable color
Pin
Cable color
1
green white
1
orange white
2
green
2
orange
3
orange white
3
green white
4
blue
4
blue
5
blue white
5
blue white
6
orange
6
green
7
brown white
7
brown white
8
brown
8
brown
1st
Ground
4--5
1st
Ground
4--5
2nd
Ground
3--6
2nd
Ground
1--2
3rd
Group
1--2
3rd
Group
3--6
4th
Group
7--8
4th
Group
7--8

Stoltzen SHE70K HDBaseT Extender Set
6
4. Specification
Model
Spec
SHE70T
SHE70R
Input
Input Signal
1 HDMI,1 IR
1 IR, 1 RJ-45
Input Connector
HDMI female
3.5mm mini jack
3.5mm mini jack
RJ-45
Video Signal
HDMI1.4
HDMI1.4
Audio
Digital audio, transmit
through HDMI audio
Digital audio, transmit
through HDMI audio
Output
Output
1 RJ-45, 1 IR
1 HDMI, 1 IR
Output Connector
RJ-45
3.5mm mini jack
HDMI female
3.5mm mini jack
Video signal
HDMI1.4
HDMI1.4
Transmission Mode
HDBaseT
HDBaseT
General
Resolution Range
800x600@60Hz~4K×2K
Transmission Distance
Maximum distance 230 ft. (70 m)
SNR
>70dB@ 100MHz-100M
Bandwidth
10.2Gbps
THD
＜0.005%@1KHz
HDMI Standard
Support HDMI1.4, and HDCP2.2
Impedance
75Ω
Temperature
0~ 50℃
Reference Humidity
10% ~ 90%
Power Supply
DC 12V, 1A
Power Consumption
9.6W
Dimension (W*H*D)
61.6 x 24.3x 120.6 mm
61.6 x 24.3x 120.6 mm
Weight
0.28Kg
0.28Kg
NOTE: All nominal levels are at ±10%.

Stoltzen SHE70K HDBaseT Extender Set
7
4.1 Supported Resolution
Format
Resolution
HDMI
480I, 480P, 576I, 576P, 720P, 1080I, 1080P, 4Kx2K, 1080P 3D
DVI
640x480@60Hz, 640x480@72Hz, 640x480@75Hz, 800x600@60Hz,
800x600@72Hz, 800x600@75Hz, 1024x768@60Hz, 1024x768@70Hz,
1024x768@75Hz, 1280x720@60 Hz, 1280x1024@60Hz,
1280x1024@75Hz, 1600x1200@60Hz, 1920x1080@60Hz,
1920x1200@60Hz.
Note: SHE70K supports 4k&1080p 3D HDMI signal, please adopt quality HDMI cables
compliant with HDMI1.4 for reliable transmission when using.

Stoltzen SHE70K HDBaseT Extender Set
8
5. Panel Drawing
5-1 SHE70T
5-2 SHE70R
HDMI IN IR IN IR OUT
DC 12V TP OUT
LINK HDCP
24.30 mm
61.60 mm
120.60 mm
120.60 mm 24.30 mm
61.60 mm
IR IN IR OUTHDMI OUT
TP IN
LINK HDCP

Stoltzen SHE70K HDBaseT Extender Set
9
6. Troubleshooting & Maintenance
No image on display:
Ensure that the display device has been set to the correct input.
Ensure that the HDMI cables used for both the source/transmitter and the
receiver/display are properly connected and are working. Test the HDMI cables
directly from a source to display and ensure their operation.
Ensure that the Cat5e/Cat6 cable has not been damaged and that it has been
terminated correctly with T568B on both ends. A temporary length of Cat5e/Cat6
can be used for testing to ensure that the devices are all compatible and working
properly.
Ensure proper grounding of the power supply.
Known issues with HDMI 1.2 source devices:
Older compatibility (HDMI 1.2) may result in HDBaseT transmission issues.
Please contact Technical Support of Stoltzen for a solution to these issues.
Color lose or poor picture quality:
Ensure that the HDMI cables used for both the source and transmitter and the
receiver and display are properly connected and are of good quality. Test the
HDMI cables directly from a source to display and ensure their picture quality.
Ensure proper grounding of the power supply.
If the static becomes stronger or picture quality becomes worse when connecting
the video connectors, this may be due to improper grounding.
Check the grounding and make sure all the components are properly grounded
to a common ground. Improper grounding may cause damage to the receiver.
If your problem persists after following the above troubleshooting steps, seek further
help from authorized dealer or our technical support.

Stoltzen SHE70K HDBaseT Extender Set
10
7. After-sales Service
If there appear some problems when running the device, please check and deal with the
problems reference to this user manual.Any transport costs are borne by the users
during the warranty.
1) Product Limited Warranty: We warrant that our products will be free from defects
in materials and workmanship for three years, which starts from the first day you
buy this product (The purchase invoice shall prevail).
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence
that the unit is within the Warranty period must be presented to obtain warranty
service.
2) What the warranty does not cover:
Warranty expiration.
Factory applied serial number has been altered or removed from the product.
Damage, deterioration or malfunction caused by:
Normal wear and tear
Use of supplies or parts not meeting our specifications
No certificate or invoice as the proof of warranty.
The product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
Damage caused by force majeure.
Servicing not authorized
Any other causes which does not relate to a product defect
Delivery, installation or labor charges for installation or setup of the product
3) Technical Support: Email to our after-sales department or make a call, please
inform us the following information about your cases.
Product version and name.
Detailed failure situations.
The formation of the cases.
Remarks: For any questions or problems, please try to get help from your local
distributor, or contact Customer Support at www.stoltzen.com.