Advantech EKI-2701MPI-R Installation and operation manual

1 Startup Manual
Overview
The EKI-2701MPI-R with high power PoE extender
is designed to extend the connection easily without
redeploying cables and power up to 30 watts with
each PD device. It enables
connections of Ethernet equipment to extend the
distance of network communications. The
EKI-2701MPI-R expands power and data, allowing
PD device to be powered via an external PoE
extender as if it had a local power supply.
Packing List
Before installation, please make sure that you have
received the following:
 1 x EKI-2701MPI-R Extender
 1 x Wall-mount kit
If anything is missing or damaged, contact your
distributor or sales representative immediately.
Datasheet
For more detailed information, please refer to the full
manual which can be found on the Advantech’s
website.
Notes
For more information on this and other Advantech
products, please visit our websites at:
http://www.advantech.com/products
For technical support and service:
http://www.advantech.com/support/
This startup manual is for EKI-2701MPI-R
1st Edition
Nov. 2018
Specifications
General
 Compatibility: IEEE 802.3, 802.3u, 802.3x,
802.3af/at, 802.3ab, HDBaseT
 LAN: 10/100/1000Base-T (X)
 Transmission Distance: Up to 100 m
 Transmission Speed: Up to 1000Mbps
 Connectors:
- PoE Input: RJ-45
- Data IN/OUT: RJ45 (P1~P4)
 LED Indicators: PWR, PoE Status, Link/Activity
 Power:
- Power Consumption: Max. 65 W
(Full load PoE+)
- Power Input: 50 ~ 57 VDC (Single input)
- Power Output 60W
 Dimensions (W x H x D):
48.6 x 140 x 95 mm (1.91" x 5.51" x 3.74")
 Enclosure: IP40
 Operating Temperature: -40 -75°C (-40~167°F)
 Storage Temperature: -40 ~ 85°C (-40 ~ 185°F)
 Humidity: 10 ~ 95% (non-condensing)
 EMC: CE, FCC
 Warranty: 2 years
Overview

Din-rail Mounting
Startup Manual 2