StorCase Technology Data Express DE110 User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

StorCase® Technology
Data Express®
DE110
Removable
Ultra ATA133
Drive Enclosure
User's Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

i
PATA DE110 User's Guide - Rev. C03 StorCase Technolo y, Inc.
StorCase Technology, Inc.
17600 Newhope Street
Fountain Valley, CA 2708- 885
Phone [phone] Fax [phone]
StorCase® Technology
Data Express® DE110
Removable
Ultra ATA133
Drive Enclosure
User's Guide
Part No. D89-0000-0158 C03 October 2005
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ii
StorCase Technolo y, Inc. PATA DE110 User's Guide - Rev. C03
LIMITED WARRANTY
STORCASE TECHNOLOGY, Incorporated (StorCase) warrants that its products will be free
from defects in material and workmanship, subject to the conditions and limitations set forth
below. StorCase will, at its option, either repair or replace any part of its product that proves
defective by reason of improper workmanship or materials. Repair parts or replacement
products will be provided by StorCase on an exchan e basis, and will be either new or
reconditioned to be functionally equivalent to new.
This warranty does not cover any product dama e that results from accident, abuse, misuse,
natural or personal disaster, external power sur e or failure, or any unauthorized disassem-
bly, repair or modification. StorCase will not be responsible for any software, firmware or other
customer data stored within, or interfacin with a StorCase product.
Duration of Warranty
Seven-Year Warranty: The followin StorCase products are covered by this warranty for a
period of seven (7) years from the ori inal date of purchase from StorCase or its authorized
resellers: all Data Express® removable device enclosures and all Data Silo®, Data Stacker® and
InfoStation® external expansion chassis, except for those components inte rated into or
purchased separately for use with these products which are identified and covered by the three-
year or hard drive warranties described below. All StorCase interface cables and other
accessories specifically intended for use with the StorCase products identified above are also
covered by this (7) year warranty.
Three-Year Warranty: The followin components inte rated into or purchased separately for
use with StorCase Data Express, Data Silo, Data Stacker and/or InfoStation products are subject
to warranty for a period of three (3) years from the ori inal date of purchase from StorCase or
its authorized resellers: all RAID controllers, power supplies, fans and blowers.
Two-Year Warranty: The followin StorCase products are covered by this warranty for a
period of two (2) years from the ori inal date of purchase from StorCase or its authorized
resellers: all Rhino®JR fixed external expansion chassis (model types FJR) and all RhinoJR
removable device enclosures (model types RJR).
One-Year Warranty: All StorCase products identified as Reconditioned or Special Inventory
are covered by this warranty for a period of one (1) year from the ori inal date of purchase from
StorCase or its authorized resellers. Reconditioned products may only be exchan ed for
reconditioned products.
Hard Disk Drive Warranty: All hard disk drives purchased from StorCase or throu h its
authorized resellers, whether purchased separately or inte rated into StorCase products, are
subject to the warranty terms and conditions provided by the drive manufacturer.
Third Party Software Warranty: All third party software purchased from StorCase for use
with and/or as part of StorCase products is subject to the warranty terms and conditions
provided by the software manufacturer.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

iii
PATA DE110 User's Guide - Rev. C03 StorCase Technolo y, Inc.
Warranty Claim Requirements
To obtain warranty service, the defective product must be returned to your local authorized
StorCase dealer or distributor, or, with prior StorCase approval, to the StorCase factory
service center.
For defective products returned directly to StorCase, a Return Material Authorization (RMA)
number must be obtained by callin StorCase Customer Service at [phone]. The RMA
number must be prominently displayed on the outside of the return packa e. Shipments must
be frei ht-prepaid and insured, and must include the product serial number, a detailed
description of the problem experienced, and proof of the ori inal retail purchase date. Products
must be properly packa ed to prevent dama e in transit. Dama e resultin from improper
packa in will not be covered by this warranty. The StorCase factory service center is located
at 17650 Newhope Street, Receivin Dock, Gate #4, Fountain Valley, CA 92780, U.S.A.
Free Technical Support
StorCase provides free technical support. If you experience any difficulty durin the
installation or subsequent use of a StorCase product, please contact StorCases Technical
Support Department prior to servicin your system. This warranty covers only repair or
replacement of defective StorCase products, as described above. StorCase is not liable for,
and does not cover under warranty, any costs associated with servicin and/or installation
of StorCase products.
StorCase Technical Support can be reached in the U.S. at [phone] or toll-free at (888)
435-5460 (U.S. and Canada only). StorCase European Technical Support can be reached in
the U.K. at [phone].
Disclaimers
The foregoing is the complete warranty for the products identified above and
supersedes all other warranties and representations, whether oral or written.
StorCase expressly disclaims all warranties for the identified products, which are
not stated herein, including, to the extent permitted by applicable law, any implied
warranty of merchantability or fitness for a particular purpose. In no event will
StorCase be liable to the purchaser, or to any user of a StorCase product, for any
damages, expenses, lost revenues, lost savings, lost profits, or any other
incidental or consequential damages arising from the purchase, use or inability
to use a StorCase product, even if StorCase has been advised of the possibility
of such damages.
Copyri ht © 2005 StorCase Technolo y. All ri hts reserved. All re istered
trademarks are the property of StorCase Technolo y. All other lo os and trademarks
are properties of their respective companies.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

iv
StorCase Technolo y, Inc. PATA DE110 User's Guide - Rev. C03
Declaration of Conformity
StorCase Technolo y, Inc.
17600 Newhope Street
Fountain Valley, CA 92708
17600 Newhope Street
Fountain Valley, CA 92708
Data Express PATA DE110
S21B100, S21B101, S21B102, S21B103,
S21B104, S21B105
EN 50081-1: 1992 Generic Emission
- EN 55022/CISPR22 Class B
- EN 61000-3-2
- EN 61000-3-3
EN 55024: 1998 Generic Immunity
- EN 61000-4-2 - EN 61000-4-6
- EN 61000-4-3 - EN 61000-4-8
- EN 61000-4-4 - EN 61000-4-11
- EN 61000-4-5
CAN/CSA-C22.2 No. 950-95
UL 1950
EN 60950: 1992 EN 60950/A2: 1993
EN 60950/A1: 1993 EN 60950/A3: 1995
FCC Part 15, Class B
AS/NZS 3548 Information Technolo y Equipment
2001
Company Name:
Corporate Office Address:
Manufacturing Address:
Product Name:
Model Number:
Conforms to the followin standards:
EMC Directives:
(8 /336/EEC)
Safety Standards:
CSA (NRTL/C)
TUV
EMI Standards:
EMC Standards:
Year of Manufacture:
Si nature:___________________
Full name: Dieter Paul
Position: President
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

v
PATA DE110 User's Guide - Rev. C03 StorCase Technolo y, Inc.
Table of Contents
INTRODUCTION ........................................................................................................................ 1
Packa in Information ................................................................................................... 1
Serial Numbers ............................................................................................................... 1
Packa e Contents ......................................................................................................... 2
General Description ....................................................................................................... 3
Receivin Frame Front Panel .............................................................................. 4
Drive Carrier ........................................................................................................ 5
Receivin Frame Rear Panel............................................................................... 6
INSTALLATION ........................................................................................................................ 7
Preparation ..................................................................................................................... 7
Installin the Drive into the Carrier................................................................................ 8
Installin the Receivin Frame ...................................................................................... 9
Selectin the Unit ID Number ....................................................................................... 12
APPENDICES ...................................................................................................................... 15
Appendix A - Specifications/Dimensions ................................................................... 16
Appendix B - Optional Accessories ........................................................................... 18
Carryin Case .................................................................................................... 18
Reader's Comments ............................................................................................................... 19
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

vi
StorCase Technolo y, Inc. PATA DE110 User's Guide - Rev. C03
L st of F gures
Fi ure 1: Packa e Contents .............................................................................................. 2
Fi ure 2: DE110 Receivin Frame and Carrier ................................................................. 3
Fi ure 3A: Receivin Frame Front Panel ............................................................................. 4
Fi ure 3B: Receivin Frame Unit ID Number and Activity Display ..................................... 5
Fi ure 4: Drive Carrier ....................................................................................................... 5
Fi ure 5: Receivin Frame Motherboard (Rear View) ..................................................... 6
Fi ure 6: Drive Installation Assembly ................................................................................ 8
Fi ure 7: Drive Cover Installation ...................................................................................... 8
Fi ure 8: Receivin Frame Mountin Holes ...................................................................... 9
Fi ure 9: Unit ID Select Switch Location ........................................................................ 11
Fi ure A-1: DE110 Physical Dimensions............................................................................. 17
Fi ure B-1: Carryin Case ................................................................................................... 18
L st of Tables
Table 1: Unit ID Select Switch Settin s .............................................................................. 12
NOTICE: This User's Guide is subject to periodic updates without notice. While reason-
able efforts have been made to ensure the accuracy of this document,
StorCase Technolo y, Inc. assumes no liability resultin from errors or
omissions in this publication, or from the use of the information contained herein.
Please check the StorCase web site at http://www.storcase.com or contact
your StorCase representative for the latest revision of this document.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Introduction 1
PATA DE110 User's Guide - Rev. C03 StorCase Technolo y, Inc.
INTRODUCTION
Packag ngInformat on
The StorCase Technolo y Data Express® system is shipped in a container desi ned to provide
protection and prevent dama e durin shipment. The Data Express unit was carefully
inspected before and durin the packin procedure at the factory. Bent or broken connectors,
or evidence of other dama e to the Data Express should be reported to the shipper immediately.
Refer to Fi ure 1 for the packa e contents.
If the wron Data Express model has been received, please call your reseller or StorCase at
[phone] to arran e for a Return Material Authorization (RMA). StorCase cannot ac-
cept returns which do not display an RMA number on the outside of the packa e. Return the
unit with all the ori inal packin materials.
Before removin any component from its packa in , dischar e any static electricity by
touchin a properly rounded metal object.
Ser al Numbers
Both the DE110 receivin frame and carrier are labeled with serial numbers. These numbers
must be reported to the StorCase Customer Service Representative in order to receive a Return
Material Authorization (RMA) for warranty claims. Locate the serial number labels and record
the numbers in the spaces provided below.
Rece v ng Frame:
Dev ce Carr er:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

2Introduction
StorCase Technolo y, Inc. PATA DE110 User's Guide - Rev. C03
PackageContents
The DE110 packa e contents include the followin items. If any item is missin or dama ed,
contact your StorCase dealer for a replacement.
Figure 1: Package Contents
Data Express
Drive Carrier
Disk Drive
(Not Included)
Power Cable
I/O Cable
Drive Mounting
Hardware (4ea)
Philli s # 6-32 x
3/16 Flat HD
ID Select Cable
0151
Cable
Cover
(Provided)
Cable Cover
Screws (2 lcs)
# 6-32 x 3/16
Flat HD
1
0834a
3
2
4
5
6
7
8
One Data Express Ultra ATA/100
Removable Enclosure
Carrier &
Rec. Frame
Carrier
Onl
Rec. Frame
Onl
1. Drive Carrier
2. Receiving Frame
3. Drive Cover
4. #6-32 Phillips Machine Hd. Screws
5. #6-32 Phillips Flat Hd. Screws
6. Alignment Tool
7. Drive Lock Ke s
8. Spacer Plates
0834L
1
1
1
4
8
1
1 Set
2
1
1
8
4
1 Set
1
1
2
9. Insert Sheet 111
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Introduction 3
PATA DE110 User's Guide - Rev. C03 StorCase Technolo y, Inc.
Figure 2: DE110 Receiving Frame and Carrier
This User's Guide describes the steps required to install the DE110 removable enclosure inside
a computer peripheral bay or external expansion chassis. This uide supplements documen-
tation provided with the host computer system, operatin system, and the drive to be installed
within the carrier.
GeneralDescription
NOTE: For Ultra ATA133 (133MByte/sec) operation, an Ultra ATA133 controller and
hard drive(s), and appropriate 40-pin, 80-conductor cable are required.
The StorCase Technolo y Data Express® DE110 is a removable drive carrier and receivin
frame, desi ned to provide durable and reliable mountin for one (1) low-profile (up to 1" hi h)
3.5" Ultra ATA133 drive within a 5.25" half-hei ht peripheral slot (Fi ure 2). It is downward-
compatible with earlier technolo y IDE drives.
The Ultra ATA133 DE110 allows a drive to be removed and transported to another Ultra
ATA133 DE110-equipped computer or expansion chassis, and also provides the ability to
secure sensitive data by removin and storin the drive safely for future use.
Drive
Carrier
0834
Receiving
Frame
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

4Introduction
StorCase Technolo y, Inc. PATA DE110 User's Guide - Rev. C03
Figure 3A: Receiving Frame Front Panel
Rece v ngFrameFrontPanel
(Fi ures 3A & 3B)
Unit ID Number Indicator (Fi ures 3A & 3B) - This LED displays the physical
address of the DE110 device carrier if the carrier is Installed and ocked in the
receivin frame or if the carrier is removed from the receivin frame. If the carrier
is Installed but not ocked in the receivin frame, a "u" will be displayed to indicate
an unlocked condition. The unit ID number is selected by means of the unit ID select
switch inside the receivin frame usin a special ali nment tool supplied with the
DE110 (see Fi ure 9).
The Activity Indicator (Fi ures 3A & 3B) - A small dot next to the unit ID number
illuminates to indicate when the host computer is accessin the data on the DE110
carrier. This dot will flash durin communication with the host computer.
2.
Unit ID Number
Indicator
Activity Indicator
0840
Receiving Frame
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Introduction 5
PATA DE110 User's Guide - Rev. C03 StorCase Technolo y, Inc.
Figure 3B: Receiving Frame Unit ID Number and Activity Display
Dr ve Carr er
(Fi ure 4)
Key Lock/Drive Power Switch (Fi ure 4) - Performs three functions. The key
switch assures proper seatin of the drive carrier within the receivin frame, turns
power to the drive carrier ON and OFF, and prevents unauthorized removal or
installation of the carrier. For the computer to access data on the disk drive, the key
must be turned counterclockwise to the locked position.
Ke Lock/Drive
Power Switch
0841
Figure 4: Drive Carrier
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

6Introduction
StorCase Technolo y, Inc. PATA DE110 User's Guide - Rev. C03
Figure 5: Receiving Frame Motherboard
(Rear View)
DC Power
Connector
(P1)
P1
+5
+12
GND
12
Master Drive
Select (ID0)
(Factory-Installed
Jumper)
Cathode Anode
P13 P14
Remote
Activity LED
I/O Connector
(JP1)
JP1
0839
= Pin 1
W1
O tion Pin
Connector
(W1)
13 14
Slave Drive
Select (ID1)
34
Factory Reserved Pins
(No Jum er Installed)
Rece v ngFrameRearPanel
(Fi ure 5)
 I/O Connector (JP1) - The input/output connector provides a standard interface for all
IDE si nals (Fi ure 5).
 DC Power Connector (P1) - A standard 4-pin DC power connector is used to accept
DC power.
 Option Pins (W1)
Master/Slave Selection Jumper (ID0 & ID1) - Master Drive desi nation (jumper is
factory-installed on ID0). Chan e jumper position to Pins 3 & 4 (ID1) for Slave Drive
desi nation.
Forces Master/Slave Drive confi uration on the receivin frame, if jumper option on the
drive itself is confi ured for Cable Selection (recommended confi uration). Refer to
pa e 7 for further information.
If usin the Drive Select Method, this option is instead used to confi ure the unit ID display
only (refer to pa e 7 for further information).
Remote Activity LED (RLED) - These pins provide power for a remote LED device
activity indicator (Pin 13=Cathode, Pin 14=Anode).
 Factory Reserved Pins - These pins are reserved for factory use only - Do not install
jumper under any circumstances!
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PATA DE110 User's Guide - Rev. C03 StorCase Technolo y, Inc.
Installation 7
INSTALLATION
NOTES: A #2 Phillips screwdriver will be required durin this procedure.
Since specifications (specifically, pin assi nments) between drive manufac-
turers may vary, please refer to your drive manufacturer's documentation for
exact information re ardin Master/Slave and Cable Select confi uration.
Preparat on
While performin the steps in this section, work on a soft surface to prevent excessive shock
to the drive bein installed. Also refer to the manufacturer's documentation provided with the
drive.
1. Remove the drive from its protective packa in .
2. Plastic Drive Bezel: If the drive came equipped with a plastic front bezel, it must
be removed before installin the drive into the drive carrier.
3. Master/Slave Drive Selection: There are two ways to set the Master/Slave Drive
desi nation for the DE110 unit, as described below.
1. Cable Select Method (Recommended Method): In most cases, the drive will
be factory-confi ured as a Master Drive usin a jumper option on the drive itself.
StorCase however, recommends reconfi urin the drive for Cable Selection
instead. This can be done by confi urin the jumper option on the drive itself
(refer to the drive manufacturer's documentation for further information).
With Cable Selection, the Master/Slave desi nation is handled by the Master/
Slave Selection Jumper Option (ID0 & ID1) located on the receivin frame
motherboard (Fi ure 5). If necessary, reconfi ure jumper (jumper is factory-
installed on ID0 for Master Drive desi nation) on receivin frame motherboard
to ID1 for Slave settin . Skip method below and continue with the Installation
process.
2. Drive Select Method: In most cases, the drive will be factory-confi ured as
a Master Drive usin a jumper option on the drive itself. Reconfi ure the jumper
if necessary (refer to the drive manufacturer's documentation for exact
Master/Slave jumper settin s).
If necessary, reconfi ure jumper (jumper is factory-installed on ID0 for Master
Drive desi nation) on receivin frame motherboard to ID1 for Slave settin .
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

8Installation
StorCase Technolo y, Inc. PATA DE110 User's Guide - Rev. C03
Figure 6: Drive Installation Assembly
Drive
(Not Included)
Drive Carrier
Board
DC Power
Cable
#6-32 Phillips
Flat Hd. Screw
(4 each)
Drive
Carrier
0835
Install ng the Dr ve nto the Carr er
1. Attach the DC power cable (from the Drive Carrier Board) to the drive (Fi ure 6).
2. Carefully insert the drive into the carrier. Slide the drive towards the Drive Carrier
Board, so that the I/O connector on the drive mates with the connector on the Drive
Carrier Board (Fi ure 6). Make sure that the DC power cable is not pinched.
Turn the drive/carrier assembly over.
3. Fasten the drive into place with four (4) #6-32 Phillips F.H. screws (Fi ure 6). Some
drives may require minor adjustment before securin into carrier with screws.
4. Install the provided drive cover (Fi ure 7).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PATA DE110 User's Guide - Rev. C03 StorCase Technolo y, Inc.
Installation 9
Figure 7: Drive Cover Installation
0836
2 Slide the cover
towards the back
of the carrier
1 Insert this end
into the carrier
first
3 Secure with #6-32
Phillips Flat Hd.
screws (2 Total)
Install ngtheRece v ngFrame
NOTE: Use a #2 Phillips screwdriver for this procedure.
The drive should be installed into the carrier before installin the receivin frame into the
mountin bay of a computer or expansion chassis.
1. Turn OFF power to the computer.
2. Open the computer system accordin to the manufacturers instructions. If neces-
sary, temporarily remove any expansion boards that may make installation difficult.
3. With the drive carrier locked in place inside the receivin frame, install the DE110
into the 5.25 drive openin in the computer or expansion chassis. Use the appro-
priate uides to position the Data Express, and fasten it into place with the four (4)
#6-32 Phillips screws provided. Fi ure 8A illustrates the location of the mountin
holes. Mountin holes are provided on each side and the bottom of the receivin
frame to accommodate a variety of mountin confi urations. Use the mountin holes
which best suit the computer or expansion chassis confi uration. Note that bottom
mountin holes require self-tappin screws (not provided).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

10 Installation
StorCase Technolo y, Inc. PATA DE110 User's Guide - Rev. C03
Figure 8A: Receiving Frame Mounting Holes
Mounting
Holes
(Right)
Mounting
Holes
(Left)
0837
Mounting
Holes
(Bottom)
Front of Unit
4. Adjust the front of the receivin frame so the carrier slides freely in and out on the
receivin frame uides. The position of adjoinin peripheral units may require ad-
justment.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PATA DE110 User's Guide - Rev. C03 StorCase Technolo y, Inc.
Installation 11
5. Connect the I/O cable from the host adapter to the receivin frame. The Pin 1 i n d i ca t or
on the cable must be properly ali ned. Refer to Fi ure 5 for the correct Pin 1 location.
6. Connect the power cable from the DC power supply in the computer or expansion
chassis to the power connector on the DE110 receivin frame. Refer to Fi ure 5
for the DE110 receivin frame power connector location.
7. Replace any expansion boards that may have been removed earlier. Replace the
system cover accordin to the manufacturers instructions.
Spacer Plates (Opt onal)
NOTE: Dependin on the computer system, spacer plates may be positioned on the
receivin frame to utilize either top or bottom row of side-mountin holes
(Fi ure 8B).
The DE110 is desi ned to fit most computer systems with standard 5.25" peripheral slots.
The installation of the spacer plates (provided) may or may not be necessary.
Figure 8B: Spacer Plate Installation (Optional)
Spacer Plate
(2 Total)
OR
0869
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

12 Installation
StorCase Technolo y, Inc. PATA DE110 User's Guide - Rev. C03
8. Reconnect any system or peripheral cables removed earlier.
9. Turn ON power to the computer. If the installation has been successful, and all the
cables have been properly attached, the system should boot normally. Althou h the
computer may not reco nize the DE110 yet, the front panel display on the DE110
receivin frame should illuminate.
10. The new drive may need to be formatted or initialized prior to use with the operatin
system and applications software. Refer to the drive and/or computer manufac-
turer's documentation for formattin information.
Select ngtheUn tID Number
1. Verify that power is turned ON to the DE110 receivin frame by turnin on your
computer. A number will appear in the unit ID display window if the carrier is locked
in place.
2. Unlock the DE110 drive carrier and remove it from the receivin frame. A "u" will
be displayed initially when the unit is unlocked but will return to a number when the
carrier is removed from the receivin frame.
WARNING: Unlockin the carrier unit switches DC power OFF to the drive. Since
disk drives require a short amount of time to spin down, allow about
15 seconds before pullin the carrier unit out of the receivin frame
to avoid possible dama e to the drive.
3. Use the ali nment tool supplied with the DE110 to select the ID number of the disk
drive. Refer to Fi ure 9 for the location of the ID Select Switch inside the receivin
frame. Table 1 lists the valid unit ID numbers available for the drive.
NOTE: The unit ID number display is for ID display purposes only. The
Master/Slave settin must still be set on the drive itself (refer to
pa e 7 of this User's Guide for further information).
4. After you have selected an appropriate unit number, replace the DE110 carrier in
the receivin frame, and LOCK IT IN PLACE.
NOTE: The lock on the DE110 carrier functions as a lock and a DC power
switch for the carrier unit. The lock must be en a ed in order to
supply power to the carrier and installed drive.
5. Reboot the computer. The new disk is now ready for use, althou h it may have to
be formatted or initialized prior to use with your operatin system and applications
software.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com