Strata DK24 User manual

To set up a Two CO Line
Connection:
b While on an outside call established
on a CO button, press the CONW
IRNSbutton.
b Press another CO button and dial a
telephone number.
b Press theCONFRRNS button after
the called parly answers.
b PresstheCONFlTRNS button
again, then hang up.
b The two outside parties are
conversing.
0
lsl
Q U I C K
REFE-RENCE
G U I D E
STRATA DK
24/56/96

To enter a Forced
Account Code:
b Access an outside line by dialing a
line access code or pressing a
CO or PL button.
) Enter the Forced Account Code.
b Listen for dial tone.
b Dial a telephone number.
To enter a Voluntary
Account Code:
) After seizing a CO line or while on
a call: Press the ACCNT button;
or dial * 5 0; or press the CONW
TRNS button and dial 4 6.
) Enter the Account Code
To activate Automatic
Busy Redial:
) After dialing an outside telephone
number, press the ARR button,
or press the CONFmNS button
and dial 4 4.
) Your telephone will signal you
when the called number becomes
not busy.
) To cancel Automatic Busy Redial,
press the ARR button, or press
the INT button and dial 4 4.
To activate Automatic
Callback:
) After dialing a busy station or
station in the Do Not Disturb
mode, press the ACE button or
dial 4.
) -Hang up. The system will call you
back when the station becomes
available.
To redial the Last
Number Dialed:
) Lift the handset and press any
available CO button.
) Press the RDL (or #) button.
To “Save” a number to
redial later: -
) Any time after dialing a telephone
number and before disconnecting
the call, press the SAVE button.
To redial a “Saved”
number:
) Access an outside line, then press
the SAVE button.
To store a Speed Dial
number:
) Press the RDL (or #) button, then
the SDS (*) button.
b Press the SD button you want to
store the telephone number on, or
dial a Speed Dial access code
(1 0 - 4 9 for Station Speed
Dial, 6 0 - 9 9 for System
Speed Dial) where you want to
store the number.
b Enter the telephone number, then
press the RDL (or #) button.
To make a call with
Speed Dial:
b Access an outside line.
b Press a SD button, or press the
SDS (or *) button and dial a
Speed Dial access code
(1 0 - 4 9 for Station Speed
Dial, 6 0 - 9 9 for System Speed
T)iall.

To leave a Message
Waiting Indication at
another station:
) After reaching a busy or
unanswered station, press the
MWfiL button.
To answer a Message
Waiting Indication at your
station:
) The Message Waiting Indication is
indicated by a flashing MWlFL
LED.
) Lift the handset, press the INT
button, then press the Mw/FL
button to call back the station or
voice mail device that left the
indication.
To make a Busy Override
or Executive Override
call:
) To make a Busy Override call, dial
2 after dialing a busy station.
) To make an Executive Override
(barge-in) call, dial 3 after
reaching a busy station.
To make a Page
announcement:
.
) Lift the handset and press the BIT
button.
b To page all stations in the All Call
Page group, dial 3 0; station
groups, dial 3 1 m 3 4; the All Call
Page group with external page
zones optionally included, dial
3 9; external page zones, dial
35-38.
To set Call Forward with
a Call Forward button:
) Press a Call Forward button:
CFAC, CFB, CFBA, or CFB/NA.
b Enter the station number to which
calls will forward.
bPress the Call Forward button
again. -
To set Call Forward with
an access code:
) Press the BIT button and dial a
Call Forward access code: Call
Forward-All Calls, 6 0 4; Call
Forward-Busy, 6 0 2; Call
Forward-No Answer, 6 0 3; Call
Forward-Busy/No Answer, 6 0 4.
b Enter the number of the station to
which calls will forward.
b Press the SPKR button.
To cancel Call Forward:
) Press the same Call Forward
button that you used to set Call
Forward; or press the INT
button, dial 6 0 1, then press the
SPKR button.
To Park a call:
) While on a call, press the CONF/
TRNS button and dial 4 1.
To retrieve the Parked
call:
b Press the BIT button and dial 4 2.

To Pick Up a call:
) Press the PKUP button or dial 5.
b To pick up a call that is ringing or
held at a station, dial the station
number; for an intercom page or
ringing door phone, dial 3 0; on
an external page, dial 3 5; for a
CO line on hold, dial 7 0 1 -
7 3 6; for any ringing CO line,
dial 9.
To Transfer a call:
b While on a call, press the CONW
TRNS button and dial a station
number.
F If the station is idle: Wait for the
station to answer, make a voice
announcement and hang up.
b If the station is busy: Hang up.
To make a Conference
Call:
b While on a call, press the CONW
TRNS button.
b To add an outside line to the call,
access an outside line and dial a
telephone number; to add a
station to the call, dial a station
number.
b Press the CONF/TRNS button
after the called party answers. All
parties are conferenced together.
To activate/deactivate
Do Not Disturb:
b To activate, press the DND button
so that the LED lights; to
deactivate, press the button again
so that the LED turns off.
To place a call on
Exclusive Hold:
b Press the HOLD button twice.
) No one can accidentally pick up
your call.
To receive a Handsfree
Answerback call:
b You will hear a single warning tone
followed by the caller’s voice.
F Without lifting the handset, speak
toward the telephone at a normal
voice level to answer the caller.
To use Handsfree
Monitoring:
b While holding down the SPKR
button during a call, place the
handset on-hook.
) Release the SPKR button.
b Lift the handset to resume the
conversation.
To make an outside call:
b Press a CO or PL button; or, press
the INT button and dial a line
access code (7 0 I- 7 3 6,
8 1 -8 8, or 9).
b Dial a telephone number, and lift
the handset when the called party
answers.
To make a call to another
station:
F Lift the handset and press the NIT
button.
b Dial a station number.