strex SP148 User manual
LED STRIP
INSTRUCTION MANUAL SP148
STREX
Thanks for choosing Strex! Read the manual carefully, for
correct and safe operation of the product. Always follow these
instructions for safe usage.
If you have any questions about the product or encounter
English
LED STRIP LIGHTS IR Remote controller IR Receiver
PACKAGE CONTENTS
INSTALLATION
OR
OR
OR
Power Supply 4-PIN
Installation Steps
STEP 1:
Connect the 4-pin connectors of the
strip and IR receiver arrow to arrow
STEP 2:
Connect the IR receiver to the DC wire
44 KEY
24 KEY
with 2 outputs
with one output
Arrow to arrow
STEP 3:
Tear off the plastic on the adhesive
tape and stick the strip to any smooth,
clean and dry surface
Please make sure the surface is
smooth, dry and clean. DO NOT stick
the led strip on surfaces, such as
wool, fabrics, dust, rough plastic
and frosted glass
STEP 4:
Stick the LED strip and press it down with
force, repeat this step untill the whole LED
strip has been placed correctly
STEP 5:
Installation has been finished. Use the
IR remote to turn on and control your
LED lighting.
Please be careful not to tear off the adhesive tape
Please pull out the transparent film from
the bottom of the IR remote to ensure
the battery is powered properly.
Pull out the
transparent film
Make sure the IR remote aims at the IR
receiver within the sensing distance. The
angle of the IR receiver is 120 degrees
and the sensing distance is 8 meters.
Please use the control within this range
for the best functionality .
Do not connect to the power supply before
proper installation.
Please make sure to spread of the light
strip before connecting to the power
supply.
IR REMOTE CONTROLLER INDICATION
How to use the DIY function on the remote controller?
When the DIY button is pressed for the first time, the control will enter DIY color
mode. You can create a own color for every single DIY key. Pressing the DIY key
again will make you leave the DIY color mode. The strip automatically saves the
color that you created. The next time this key is pressed, it will show the color
you saved the last time.
There are 6 DIY keys so you can save up to 6 colors. All modes are independent and
have no effect on each other. For example: If you press DIY key 1 first and DIY key
2 afterwards, DIY key 1 will be invalid, until key 2 is pressed once again.
44 KEY Remote
1. LED brightnesss adjustment UP
2. LED brightness adjustment down
3. Pause/continue
4. ON/OFF
5. LED color buttons (20 colors)
Red/green/blue/white/orange/light green/
dark blue/milk white/dark yellow/cyan
/lyons blue/white pink/yellow/light blue
/purple/green white/light yellow/sky blue
/ brown/blue white
6. Quick button: speed up color changing
under jump3, jump7, fade7 and flash modes
7. Slow button: speed up color changing
under jump3, jump7, fade7 and flash modes
8. Auto button: speed up color changing
under jump3, jump7, fade7 and flash modes
9. Flash button: Flash on and off
10. Fade 7 button: Gradually fade 7 colors
11. Fade 3 button: Gradually fade 3 colors
12. Jump 7 button: Gradually jump 7 colors
13. Jump 3 button: Gradually jump 3 colors
14. DIY buttons: 6 DIY color memory buttons
15. Adjust buttons: Increase/decrease RGB
1 2 3
4
5
6
7
8
9
10
111213
14
15
24 KEY Remote
1. LED brightnesss adjustment UP
2. LED brightness adjustment down
3. OFF button
4. ON button
5. LED color buttons (16 colors)
Red/green/blue/white/orange/pea green
/ dark blue/dark yellow/cyan/brown/
yellow/light blue/pink/straw yellow/sky blue
/purple
6. Flash on/off
7. Strobe button: Fast changing lighting
8. Fade button: Fade to next color every
3 seconds
9. Smooth button: Fade to next color every
0.5 second
1
2 3
4
5
6
7
8
SMOOTH 9
Specifications
Safety tips
Working
environment
Input voltage
Life Span
Temperature
range
Working
Humidity
SMD 3258 RGB
SMD 5050 RGB
-25 C ~ 60 C
0% ~ 80% RH
DC 12V
25000 hrs
50000 hrs
1. Please ensure the power is off before wiring and installation
2. Supply voltage of this product is DC 12V never connect to DC 24V or AC 220V
3. Never connect to wires directly in case of short circuit
4. Please connect several strips in parallel and choose a multi-ports adapter if you
want to usethe strips together
5. To ensure normal work of the ship, please use the voltage indicated on the box
6. If the power supply is damaged, do not attempt to repair it yourself. Please leave
it to a professional technician.
7. Please do not light the strip on for over 5 seconds when its still rolled up.
8. Please do not use this product in open air or humid environments
9. To avoid any damage to the strip, please do not use chemical solvent during
cleaning
© Strex 2021
STREX
Manual information
All rights reserved. No part of this publication may be reproduced, distributed, or
transmitted in any form or by any means, including photocopying, recording, or
other electronic or mechanical methods, without the prior written permission of the
publisher, except in the case of brief quotations embodied in critical reviews and
certain other noncommercial uses permitted by copyright law. For permission
requests at the address below.
SBD Trading B.V. (Strex Europe)
Noorwegenstraat 6-A4
7418BC Deventer
The Netherlands
Troubleshooting
Strip does not light on after
installation
Strip does not light on after
progamming DIY keys
2 Strips with different colors
Check the connector and if the
led strip has acces to power.
Check if the plastic film has been
removed on the remote.
Replace the battery remote.
Check if the shear connection is
correct
Check if the 2 strips are connected
in parallel
Table of contents
Other strex Lighting Equipment manuals
