Subaru B9 TRIBECA WX 2007 User manual

FW-2
Foreword
FOREWORD
1. Foreword
A: FOREWORD
These manuals are used when performing mainte-
nance, repair or diagnosis of Subaru B9 TRIBECA.
Applicable model:
2007MY WX*****
The manuals contain the latest information at the
time of publication. Changes in the specifications,
methods, etc. may be made without notice.
asieps_tobira.book 2 ページ ２０１２年２月１０日 金曜日 午後３時２６分

HOW TO USE THIS MANUALS
HU
Page
1. How to Use This Manuals ..........................................................................2
asieps_tobira.book 1 ページ ２０１２年２月１０日 金曜日 午後３時２６分

HU-2
How to Use This Manuals
HOW TO USE THIS MANUALS
1. How to Use This Manuals
A: HOW TO USE THIS MANUALS
1. STRUCTURE
Each section consists of SCT that are broken down
into SC that are divided into sections for each com-
ponent. The specification, maintenance and other
information for the components are included, and
the diagnostic information has also been added
where necessary.
2. CONTENTS
The first page has an index with tabs.
asieps_tobira.book 2 ページ ２０１２年２月１０日 金曜日 午後３時２６分

HU-3
How to Use This Manuals
HOW TO USE THIS MANUALS
3. COMPONENT
Illustrations are provided for each component. The information necessary for repair work (tightening torque,
grease up points, etc.) is described on these illustrations. Information is described using symbol.
To order parts, refer to parts catalogue.
Example:
HU-00017
(14)
(9)
(8)
(7)
(6)
(10)
(4) (10)
(22)
(11)
(19)
(17)
(15)
(13)
(12)
(18)
(16)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(11)
(10)
(9)
(12)
(13)
(19)
(18)
(20)
(17)
(16)
(24)
(10)
(25)
(5)
(4)
(4)
(4)
(3)
(3)
(3)
(2)
(1)
(21)
(15)
(23)
T7
T2
T2
T2
T2
T2
T2
T4
T5
T5
T8
T6
T6
T6
T11
T10
T1
T1
T3
T3
T3
T1
T9
T4
T5
T5 T3
T4
T3
T2
T4
T2
T1
T3
(20)
(21)
(23)
(22)
(10)
(24)
(25)
(26)
(35)
(34)
(27)
(14)
(28)
(29)
(31)
(32)
(37)
(30)
(33)
(36)
T3
T2
T1 ....
,
: Selective part
: Replacement part
: Sealing point
: Should be lubricated with oil.
: Should be lubricated with grease.
: Tightening torque
asieps_tobira.book 3 ページ ２０１２年２月１０日 金曜日 午後３時２６分

HU-4
How to Use This Manuals
HOW TO USE THIS MANUALS
4. SPECIFICATION
If necessary, specifications are also included.
5. INSPECTION
Inspections to be carried out before and after maintenance are included.
6. MAINTENANCE
• Maintenance instructions for serviceable parts describe work area and detailed step with illustration. It also
describes the use of special tool, tightening torque, caution for each procedure.
• If many serviceable parts are included in one service procedure, appropriate reference is provided for each
parts.
Example:
(A) Component (D) Cautions (G) Tightening torque
(B) Process (E) Tool number of special tool (H) Illustration
(C) Reference (F) Name of special tool
HU-00020
1) Remove the manual transmission assembly
from vehicie. <Ref. to MT-33, REMOVAL, Manual
Transmission Assembly.>
15.Main Shaft Assembly for Sin-
gle-Range
A: REMOVAL
11) Tighten the lock nuts to the specified torque us-
ing ST1 and ST2.
NOTE:
Secure the lock nuts in two places after tightening.
ST1 498937000 TRANSMISSION HOLDER
(A)
(B)
(C)
(D)
(G)
(E) (F)
(H)
Tightening torque:
118 N m (12.0 kgf-m, 86.8 ft-lb)
ST1
ST2
ST2 499987003 SOCKET WRENCH (35)
asieps_tobira.book 4 ページ ２０１２年２月１０日 金曜日 午後３時２６分

HU-5
How to Use This Manuals
HOW TO USE THIS MANUALS
7. DIAGNOSIS
Tables showing a step-by-step process make it easy to conduct diagnosis.
8.SIUNITS
Measurements in these manuals are according to the SI units. Metric and yard/pound measurements are
also included.
Example:
Tightening torque:
44 N·m (4.5 kgf-m, 33 ft-lb)
The figure used in these manuals are described in the SI units and conventional units are described in ( ).
Item SI units Conventional unit Remarks
Force N (Newton) kgf 1 kgf = 9.80655 N
Mass (Weight) kg, g kg, g
Capacity 2, m2or cm32or cc 1 cc = 1 cm3= 1 m2
To r q u e N · m k g f - m , k g f - c m 1 k g f - m = 9 . 8 0 6 5 5 N · m
Rotating speed rpm rpm
Pressure kPa (kilopascal) kgf/cm21 kgf/cm2= 98.0655 kPa
mmHg1mmHg=0.133322kPa
Power W PS 1 PS = 0.735499 kW
Calorie W·h cal 1 kcal = 1.16279 W·h
Fuel consumption rate g/kw·h g/PS·h 1 g/PS·h = 1.3596 g/kW·h
asieps_tobira.book 5 ページ ２０１２年２月１０日 金曜日 午後３時２６分

HU-6
How to Use This Manuals
HOW TO USE THIS MANUALS
9. EXPLANATION OF TERMINOLOGY
•List
AAI : Air Assist Injection M/B : Main Fuse & Relay Box
A/B : Airbag MD : Mini Disc
ABS : Anti-lock Brake System MFI : Multi Point Injection
A/C : Air Conditioner MP-T : Multi-Plate Transfer
A/F : Air Fuel Ratio MT : Manual Transmission
ALT : Generator NA : Natural Aspiration
ASSY : Assembly NC : Normal Close (Relay)
AT : Automatic Transmission NO : Normal Open (Relay)
AT F : Au t o m a t i c Tr a n s m i s s i o n F l u i d OP : Option Parts
AUX : Auxiliary P/S : Power Steering
BATT : Battery P/W : Power Window
CD-R/RW : CD Recordable/Rewritable PCD : Pitch Circle Diameter
CPU : Central Processing Unit PCV : Positive Crankcase Ventilation
DOHC : Double Overhead Camshaft RH : RH (Right Hand)
DVD : Digital Versatile Disc Rr : Rear
ECM : Engine Control Module (ECM) SOHC : Single Overhead Camshaft
EGR : Exhaust Gas Recirculation SRS : Supplemental Restraint System
ELR : Emergency Locking Retractor
EX : Exhaust SSM : Subaru Select Monitor
F/B : Fuse & Joint Box ST : Special Tool
FL : Fusible Link SW : Switch
Ft : Full-time AWD TCS : Traction Control System
FWD : Front Wheel Drive TGV : Tumble Generator Valve
GPS : Global Positioning System T/M : Transmission
H/U : Hydraulic Unit ViS-C : Viscous Coupling
IG : Ignition VSV : Vacuum Switching Valve
INT : Intermittent VTD : Variable Torque Distribution
ISC : Idle Speed Control W/H : Wiring Harness
LH : LH (Left Hand) Pr : Primary
LSD : Limited Slip Differential 2ndr : Secondary
asieps_tobira.book 6 ページ ２０１２年２月１０日 金曜日 午後３時２６分

SPECIFICATIONS
SPC
Page
1. B9 TRIBECA ..............................................................................................2
asieps_tobira.book 1 ページ ２０１２年２月１０日 金曜日 午後３時２６分

ID-2
Identification
IDENTIFICATION
1. Identification
A: IDENTIFICATION
1. IDENTIFICATION NUMBER AND LABEL LOCATIONS
The V.I.N. (Vehicle Identification Numbers) is used to classify the vehicle.
•POSITIONING OF THE PLATE LABEL FOR IDENTIFICATION
•ENGINE •AUTOMATIC TRANSMISSION
(1) Emission control label (5) Emission control label FMVSS
label (U.S. model)
CMVSS label (Canada model)
(6) Radio noise label
(2) Vehicle identification number
(VIN)
(3) Model number label
(4) Tire inflation pressure label
(Driver’s side)
ID-00161
(2)
(6)
(1)
(2)
(4)
(5)
(3)
(1) Engine serial number (Punch mark)
(2) Engine type (Crankcase upper side)
ID-00059
(2)
(1)
(1) AT type label
(2) Transmission serial number label
ID-00067
(2)
(1)
asieps_tobira.book 2 ページ ２０１２年２月１０日 金曜日 午後３時２６分

ID-3
Identification
IDENTIFICATION
•REAR DIFFERENTIAL
•MODEL NUMBER LABEL
(1) Type (label)
ID-00114
(1)
%QNQT %QFG
%QFG
FG
EQWNGWT
6TKO
ICTPKVWTG
%QFG
%QFG
6[RG
FG
6TCPUOKUUKQP
/QFGNG
FG
DQVGU XKVGUUG
'PIKPG
/QFGN
6[RG
/FGNG
%QPEGOG
#RRNKGF
/QFGNG
FG
OQVGWT
1RVKQP %QFG
%QFG FQRVKQP
ID-00160
asieps_tobira.book 3 ページ ２０１２年２月１０日 金曜日 午後３時２６分