SunBriteTV SB-7574UHD User manual

Veranda Outdoor Television
Quick Start Guide SB-7574UHD
Planning the Location Veranda All-Weather TVs are best viewed in
fully shaded environments.
Sources/What to Watch
Weather Proong
• After all connections are made, all wires
must exit the media bay from the bottom.
• Up to 5 wires can exit the media bay while
still maintaining the weatherproof feature.
Note: Leave a drip loop as the wires enter the
compartment.
• Tighten the thumb screws completely to
weatherproof the TV.
• Signals can be sent from any source using
an HDMI, Component, or digital antenna
connection.
• Refer to the operator’s manual for detailed
instructions.
Component input: use the
included adapter cables as
shown.
Note: The audio cable can
also be used for analog audio
out.
Audio
Video
(Video)Composite
input:
Use the Green RCA
connector only
Wires
Drip Loop
Media Bay
Thumb Screws

SETUP
• Use the TV remote to access the setup menu and run initial installation.
• Select Language, Location and Time Zone, and default TV settings for the TV location.
• Select the corresponding input source and follow on screen instructions to complete
setup.
• Refer to the operator’s manual for detailed instructions.
CONTROL
The Veranda can be controlled via the included remote or universal remote.
IR codes are available at: https://www.sunbritetv.com/support/product-support/product-faq.
© 2017 SunBriteTV-Veranda Outdoor Television Rev:171007_2038
Veranda Outdoor Television
Quick Start Guide SB-7574UHD