Sungale AD1500 User manual

1
QUICK START GUIDE
Model: AD1500
2
Welcome
Congratulations on your purchase of Sungale digital photo frame.
This quick-start-guide will help you setup and start using the player
as quickly as possible.
Step 1- Take out battery's insulating tab of remote control
Please take out the battery's insulating tab first before using it.
Insert the DC Adaptor to the DPF player, then connect the adaptor
power cord to a standard wall outlet.
After power connection, the frame will slide show pictures, press
EXIT to enter into the main menu interface as follow:
Step 2- Plug in the player
Step 3-Turn on the player
You can select and enter into the “NAND” menu as below then
display the files in the memory.

34
Support
3. Contact Sungale Support team
If you encounter an issue, resolve the issue in the following order.
1. Refer to the User's Manual.
Go to www.sungale.com and click “Support”, then click “Manual
Download” at the left side. You will find user manual with related
model number (AD1500). Click “Manual Download-EN” to
download the user manual
2. Visit the support site.
For manual download and FAQs: www.sungale.com
Toll Free Call in the USA: 800-473-5156
Service email: [email protected]
Step 4-Connect to PC
Connect the device to computer with the USB cable, copy and paste
the files to the storage of unit. After the file transfering, please Safely
Remove Hardware from the PC, and then directly unplug the USB
connection, then find and enjoy the files from the NAND Menu.
Note: For the first time you connect this device to your computer, you
might be asked to install driver of your device so that it can be
recognized by your computer. Please follow the installation guide or
contact your computer service provider for help.
Step 5-Insert the source(Memory card/USB
removable storage device)
Press MENU to display the function/root menu for the functions.
When the unit is in function/root menu, press the navigation buttons
to select the desired content.
Insert the memory card or USB removable storage device to the
digital photo frame. Select the appropriate function/root menu.
Step 6-Remove control operation
SD/SDHC