SUNITEC ENTERPRISE CO BT-02A2 User manual

Product Specification and User Manual
®
SUNITEC ENTERPRISE CO., LTD.
Tong-Fu-Yu Ind, Ku-Keng, Guan-Lan, Bao-An District, Shenzhen 518110, China.
TEL:86-755-28088244/28089953 FAX:86-755-28088153
Email:
User Manual
Product Name: Bluetooth Speakerphone
Product Model. BT-02A2
Customer NOKIA
Document version V1.0
Product Development Department DATE
Prepared By: 2006-07-28
Approved By: 2006-07-28
BT-02A2 www.sunitec.com.tw 第1页, 共1页

Product Specification and User Manual
®
DOCUMENT CHANGE HISTORY
Version Date Person Remarks
Draft V0.1 2006-05-31 yuanshun
V1.0 2006-07-28 yuanshun First release
BT-02A2 www.sunitec.com.tw 第2页, 共2页

Product Specification and User Manual
®
1. Product Features:
This versatile Bluetooth speakerphone is specially designed for user to enjoy convenience and freedom
of wireless Communication. Dual capacity of use on desk-top like a Conference Speakerphone and in-car
like a Hands-Free Car kit. Unique Privacy Handset/Mute control button allows user to use this kit like a
normal handset for private Communication purpose. Advanced built-In Dual-Mic.(BEAM FOAMING)
with D.S.P. solution for Echo Cancellation & Noise Suppression gives you impeccable full duplex sound
quality you’ve never dreamed of.
2. Product Specifications:
Bluetooth compliance: Bluetooth v1.2
Supports Headset and Handsfree profiles.
Output Power: Class 2 device.
Operating range: Up to 10m.
Operating frequency: 2.402GHz~2.480GHz.
Support Multiple paired. (Up to 8 Bluetooth Phone can be paired).
Up to 10 hours talk time and 500 hours standby time.
Charger time: 2 hours.
Charger in Voltage: DC 5V 400mA.
Battery Type: BL-5B 820mA
Size: L 126 * W 47 * H 16 mm
Weight: 80g
3. Product Appearance:
4. Button Functionality:
Buttons Functions Description
“MFB”Button
Power ON/OFF
Pairing
Answering Call/End Call/Cancel Call
Reject Call
Voice Dial
Last No. Redial
“Volume” Buttons
Volume adjustment
Transfer Call
Restore to Factory Default Setting
“Mode” Button Privacy Handset switch
Passkey Code 0000
BT-02A2 www.sunitec.com.tw 第3页, 共3页

Product Specification and User Manual
®
5. Operating Functionality
Turning On/Off the Speakerphone
Turning On: Speakerphone is under off mode: Press and hold the MFB for 3 seconds until you hear a
short beep. The LED will flash blue for 3 seconds.
Turning Off: Speakerphone is under standby mode: Press and hold the MFB for 3 seconds until you hear
a long beep. The LED will flash red for 3 seconds.
IMPORTANT: Press the MFB again each time you turn on the speakerphone to react the paring so that
the connection in between the speakerphone and paired mobile handset is resumed.
Pairing to Phone:
Prior to using the speakerphone for the first time, you must pair it with a Bluetooth-enabled mobile handset.
The following steps describes pairing instruction for a typical Bluetooth-enabled mobile handset.
(a) Place the speakerphone and mobile handset no more than 1 meter apart.
(b) Ensure the speakerphone is under OFF mode.
(c) Press and hold the MFB for 6 seconds until you hear a long beep. The LED will flash red and blue
alternatively. It’s now ready for pairing.
(d) Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details.
Mean while, the handset will search for accessible Bluetooth devices.
(e) Select “BT-02A2” from the list.
(f) Enter the pre-programmed passkey “0000” and press “OK” to pair the speakerphone and the handset.
When pairing is completed, you may hear a long beep and LED will flash blue 3 times. Now the
speakerphone is under standby mode with LED flashes blue every 3 seconds.
(g) Press “Return” to go back to your handset’s main menu. (For most of the mobile handset models, a
headset icon will be shown on the screen.) You should now be able to make and receive calls through
the speakerphone. Please place the mobile handset to the speakerphone no more than 10 meters.
(Obstruction could cause shorter sensing distance.)
IMPORTANT: Under the pairing mode, if the pairing cannot be completed within 2 minutes, the
speakerphone’s LED will flash off and speakerphone will be under off mode. Please repeat step (c) to (g)
to pair the speakerphone and mobile handset again.
Connection/Link between Speakerphone and Mobile Handset:
After pairing is completed, speakerphone is always under standby mode. Before you place or answer a call, if
the headset ICON is not shown on phone screen, please follow the simple steps to activate the Bluetooth
connection/link through your handset or speakerphone until the headset ICON is on the screen.
(a) On Handset: Select “BT-02A2” from the paired list on your handset screen.
(b) On Speakerphone: Short press MFB and select “Accept” on handset screen to accept connection.
IMPORTANT: Whenever Bluetooth connection/link is removed, for example: power off on
speakerphone/mobile handset or out of 10 meter sensing distance, please activate connection/link as
suggested.
Disconnection between Speakerphone and Mobile Handset:
You may connect your speakerphone with another Bluetooth handset. Please follow the simple steps to
disconnect the speakerphone with the pre-paired handset.
(a) Power off the speakerphone.
(b) Select “disconnecting” to remove previous connection from your handset list.
BT-02A2 www.sunitec.com.tw 第4页, 共4页

Product Specification and User Manual
®
Using the Speakerphone
Once pairing is completed, you may access the following functions. Some of the below-mentioned function is
only accessible for handsets supported with Hands-Free Profile.
(a) Answering a Call:
To answer a call, wait for the speakerphone to ring, then short press the MFB to accept the call or answer
the call via your mobile handset in the normal way.
(b) Ending a Call:
Short press the MFB, to end your call or end the call via your mobile handset in the normal way. Mean
while you can hear a short beep from the speaker.
(c) Reject a Call:
When you hear the ringing tone, press and hold the MFB for 3 seconds until you hear a short beep.
(d) Voice Dialing:
If your mobile handset is voice dialing enabled, under standby mode, press the MFB and when you hear a
beep, say the voice tag.
IMPORTANT: Please make sure to record voice tag into the mobile handset before using voice dialing
function. This function is only applicable to mobile handset with Bluetooth Hands-Free Profile.
Because of variation of different phone, some of the phones, you may not hear the beep. Please refer to
your mobile handset user guide for additional information.
(e) Last Number Re-Dialing:
Under standby mode, short press MFB twice for last number redial.
(f) Privacy Handset:
During conversation in progress, press the “MODE” button. Speaker and mic volume will be decrease with
LED flash blue. You may now use the speakerphone as a normal handset.
(g) Adjusting the Volume:
During conversation in progress, press the volume button repeatedly until you reach the desired volume
level.
(h) Mute & Un-mute:
To mute the speakerphone, press the “MODE” button for 3 seconds. Mean while, the LED flashes red.
To un-mute the speakerphone, press button again.
(i) Call Inter-Changing:
(1)Speakerphone to Handset::During conversation in progress, press and hold the V+ & V-
simultaneously.
(2)Handset to Speakerphone:Press the MFB.
Restore to Default-Remove Previous Pairing & Connection
You may want to reset the speakerphone to its original settings and clear the previous pairing. Please follow
these simple steps.
(a) Ensure the speakerphone is under standby mode.
(b) Press and hold the volume increase & decrease buttons simultaneously for 10 sec. until LED flashes blue
& red alternatively. Release the buttons.
(c) Again, press and hold the volume increase & decrease buttons simultaneously for 2 sec. until
speakerphone emits 2 short beeps. The speakerphone will be powered off and back to default setting.
(d) After defaulting, if speakerphone is power on again, the LED will flash red every 3 seconds and
speakerphone will emit 3 beeps every 1minute. Then, the speakerphone will be powered off within 2
minutes. This is normal. The speakerphone will be back to normal after completion of pairing with
Bluetooth devices.
BT-02A2 www.sunitec.com.tw 第5页, 共5页

Product Specification and User Manual
®
LED Indication:
Speakerphone Status Red LED Blue LED Sound
Off Mode Off Off
Power On On for 3 sec. Short beep
Power Off On for 3 sec. Long beep
Standby - before Pairing Flash on every 3 sec. 3 beeps every one minute
Standby - after Pairing Flash on every 3 sec.
Standby - Low Voltage Flash on every 3 sec. 3 beeps every one minute
Talking in Progress Flash on every 15 sec
Pairing in Progress Flash on alternatively
Pairing Completed Flash on every 3 sec. Long beep
Mute Steady on
Private Handset Steady on
Charging in Progress Steady on
Charging Completed Off Off
BT-02A2 www.sunitec.com.tw 第6页, 共6页
Table of contents