SUNLUNE JASMINER X4 User manual

JASMINER X4
High-throughput 1U Server Instruction
Manual
Tip: Follow the official account of SUNLUNE , then reply “course” to get the use
demonstration video of the device.
SUNLUNE Technology (Jiangsu) Co., Ltd.
August 2021

JASMINER X4 High-throughput 1U Server Instruction Manual
2
Catalogue
I Product introduction....................................................................................................3
II Product features............................................................................................................3
III Inspection before use................................................................................................3
IV Description...................................................................................................................5
V Settings...........................................................................................................................7

JASMINER X4 High-throughput 1U Server Instruction Manual
3
JASMINER X4 High-throughput 1U Server Instruction Manual
I Product Introduction
Jasminer X4 high-throughput 1U server, is a ethash server with high-
throughput technology developed by Sunlune technology (Jiangsu) Co., Ltd.
Jasminer X4 based on memory computing integrated high-throughput
computing chip. The chip with memory computing integrated structure realizes
the combination of storage and computing, Under the condition of meeting the
requirements of storage capacity, it improves the memory access bandwidth,
breaks through the bottleneck of computing power, save power and size ，
providing sufficient computing power, exquisite low-noice design，solid and quite.
with the integrated memory and computing architecture and high- throughput
technology, Jasminer X4 suitable for PoW algorithms such as ETCHASH and
ETHASH, satisfy various customers and bring them a good return on investment.
II Product features
Excellent performance and easy to use，Exquisite design, friendly interface
and simple operation. Just need set a few parameters.Simple interface,power
supply and network access is required. Excellent computing performance, efficient
and concise IO expansion capability and high stability.
Energy saving, environment friendly and widely used
Very low power consumption, low-noice design, high efficiency ,
environment friendly production. Environmental temperature≤40 °C.

JASMINER X4 High-throughput 1U Server Instruction Manual
4
JASMINER X4 high-throughput 1U server
III Inspection before use
1.Inspection before use
l After unpacking, please check for any package deformation or interface
damage. If there is any fault, please contact the after-sales department.
l Check for abnormal sound, metal collision or screw loosen.If there is any
fault, please contact the after-sales department.
2.Attention
l The device should be connected to router or Exchanger without Poe
function, only wired network connection can be used.
l To avoid heat dissipation, do not stack or cover the device with other
objects.
l Please run the device under the recommended operating environment
(operating temperature: 0-40℃, operating humidity: 5% RH~95% RH, non

JASMINER X4 High-throughput 1U Server Instruction Manual
5
condensation) to avoid affecting the normal operation or performance of
the device.
l Pay attention to dust and foreign matters,otherwise, the mainboard may
be corroded and the device cannot work properly.
l Private renovation is not guaranteed.
l There are four protective sleeves are equipped to prevent edge scratches.
Please insert the protective sleeve for safety before use.
IV Basic description
1. Device

JASMINER X4 High-throughput 1U Server Instruction Manual
6
Attention:
Place the device as shown in the figure above. Do not place the device in a
closed space.
For your safety, do not remove any screws or fasteners from the device.
The device will generate heat during operation. Please avoid touching the black
shell during operation.
2.parameter
Overview
Specification
Type
JASMINER X4
Name
High-throughput 1U server
Encryption algorithm
ETCHASH&ETHASH
Hashrate（MH/s）
520/450±10%
power consumption（Watt）
240±10%
Energy efficiency ratio (25 ° C
ambient temperature, w / MHs)
0.46/0.53±10%
Hardware Configuration
Network connection
RJ45 Ethernet 10/100/1000M
Device size (mm)
257× 100× 20
Package size (mm)
343×286×183
Device weight（kg）
4.8
Overall weight (including package,
kg)
5.6

JASMINER X4 High-throughput 1U Server Instruction Manual
7
2. Interface and description
TF card
TF Card slot
IP Report
When using IP report software, the high-throughput Mini
server IP address will be feedback to your PC
ETH
network interface
Reset
Restore factory setting
Alarm lamp
(red)
Flashing light indicates device failure
Operation lamp
(green)
Flashing light indicates device running well
V Use and settings
1. Connection inspection
a) Network cable connection: Insert the RJ45 crystal head into the network
cable interface marked eth of the router and the device interface
IP Report
Network interface
Power port / AC
IN
TF Card
slot
Reset
Alarm lamp(red)
Alarm lamp(green)

JASMINER X4 High-throughput 1U Server Instruction Manual
8
respectively. Pay attention to the direction when inserting the cable. Please
insert the crystal head in place.
b) Power cable connection: Connect the Power output end of the adapter to
the Power port labeled Power of the device, and then connect the 220V
AC Power to the device for normal operation.
2. Find device IP address
After the device is plugged in with a network cable and powered on, the
device starts running. If the green indicator blinks, it indicates that the device is
running well. You can obtain the IP address of the device in 2 ways:
（1）Log in to the router connected to the device and query the device IP
l Log in to the router management page with a browser, enter the router
account and password information, log in to the router management system,
view the network device terminal connected to the router, find "JASMINER"
device, and view the device IP address.
（2）use the IP Report software provided by JASMINER to obtain the IP
l Run sl_Miner.exe program on any PC with windows OS, please make sure that
your PC and the device working on same local network segment.
l According to the following figure, click "Settings and query" → "Start
listening" in sequence on the software interface, and press the IP Report
button of the device, the software automatically pops up related information
of the device.
Settings and query

JASMINER X4 High-throughput 1U Server Instruction Manual
9
l Shown IP as the currently set IP address.
3. Configure high-throughput 1U server
a) Enter the shown IP address into the browser and press enter to open the
device web operation interface.
Default user name: root
Default password: root
Start listening
Related information
Press the IP Report button of the device

JASMINER X4 High-throughput 1U Server Instruction Manual
10
b) Enter the "miner" configuration interface to modify the ore pool settings
and let the device start to provide hashate for you.
l Enter the preferred and two alternative mining pool addresses, account
name and password.
l Select the algorithm. The device support both ETCHASH and ETHASH
algorithm. Default algorithm is ETCHASH.
l Click "update" to submit the configuration.
c) View hashrate
After 30 minutes running, we can find device hashrate on Status page.

JASMINER X4 High-throughput 1U Server Instruction Manual
11
Configuration of this high-throughput 1U server is complete.
4. Other settings
a) IP setting: If you need to change the network configuration such as IP
address, select the "network" configuration item, and the device will
dynamically obtain the IP address by default. After the change, click
"update" to take effect.
b) Modify login password: If you need to change the login name and
password. Select the "admin" configuration item. The default login name
of the device is root and the default password is root. After the change,
click "update" to take effect.

JASMINER X4 High-throughput 1U Server Instruction Manual
12
c) View log: If you want to view the log information of the system operating.
You can select the "log" option.
d) Upgrade system firmware: Select the "upgrade" option, select the
firmware to be upgraded, and click "upload image" to complete the
upgrade operation.

JASMINER X4 High-throughput 1U Server Instruction Manual
13
e) Restart the device: Select "reboot" and click "reboot now".
f) Restore the device to the factory settings, select "reset", and click "reset
now".

JASMINER X4 High-throughput 1U Server Instruction Manual
14