Sunny Health & Fitness SF-S0637 User manual

TWIST-IN STEPPER WITH
HANDLEBAR
SF-S0637
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment
instructions. Your satisfactionis very important to us, PLEASE DO NOT RETURN UNTIL
YOU HAVE CONTACTED US: [e-mail] or 1- 877 - 90SUNNY
(877-907-8669).

1
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using
the equipment. Safe and effective use can only be achieved if the equipment is
assembled, maintained and used properly. It is your responsibility to ensure that all users
of the equipment are informed of all warnings and precautions.
1. Before starting any exercise program, you should consult your physician to determine if
you have any medical or physical conditions that could put your health and safety at risk
or prevent you from using the equipment properly. Your physician’s advice is essential if
you are taking medication that affects your heart rate, blood pressure or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.
Stop exercising if you experience any of the following symptoms: pain, tightness in your
chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness or nauseous
feeling. If you do experience any of these conditions, you should consult your physician
before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult
use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or
carpet. To ensure safety, the equipment should have at least 4 feet (1.2 m) of free space
all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The
safety of the equipment can only be maintained if it is regularly examined for damage
and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components while
assembling or checking the equipment, or if you hear any unusual noises coming from
the equipment during exercise, discontinue use of the equipment immediately and do not
use until the problem has been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may
become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 220 pounds (100 kg).
10.The equipment is not suitable for therapeutic use.
11.To avoid bodily injury and/ ordamage to theproduct or property,properlifting andmoving
are required.
12.Your product is intended for use in cool and dry conditions. You should avoid storage in
extreme cold, hotor damp areas as this may lead to corrosion and otherrelated problems.
13.This equipment is designed for indoor and home use only; it is not intended for
commercial use.

2
NOTE:
We recommend that you place a non-slip mat underneath the stepper to protect your
carpet or floor.
Always make sure that the product is placed on a flat and non-skid surface.
Check all connections and moving parts on a regular basis. Damaged parts have to be
changed immediately. During the time of repair the product must not be used by anybody.
Clean your equipment with non-caustic detergents. Use a soft cloth for drying after
cleaning.
A) This product has been tested in accordance with the requirements of EN 957-1, 957-8
standard, class H (home use). The maximum load is limited to 100 kg.
B) The CE marking of this item is in regard to the electromagnetic compatibility (EC-
directive 89/EWG) as well as to the electrical safety.

3
EXPLODED DIAGRAM
HARDWARE PACKAGE
1 PCS
#37 M8 x 24.5 4 PCS
#36 4 PCS
# 27 1 PCS
#13 2 PCS

4
PARTS LIST
NO.
DESCRIPTION
SPECIFICATION
QTY
1
Main Frame
1
2
Pedal Holder, Right
1
3
Pedal Holder, Left
1
4
Hydraulic Cylinder
2
5
Pedal, Right
1
6
Pedal, Left
1
7
Front Base Support
1
8
Plastic Spacer
1
9
Meter
1
10
Magnet
1
11
Axle
16x170 mm
1
12
Square Plastic Bushing
25.4 mm
2
13
Plastic End Piece
2
14
Plastic Bushing
38 mm
4
15
Plastic Spacer
2
16
C-Ring
2
17
Plastic Cap
2
18
Pedal Stopper
2
19
Screw
M8 x 40 mm
2
20
Screw
M6 x 23 mm
4
21
Nut
M8
2
22
C-Ring
2
23
Screw
M8 x 20 mm
1
24
Washer
72 mm
1
25
Washer
38 mm
4
26
E-Ring
2
27
Cover
1
28
Plastic Bracket
1
29
Wire A
1
30
Handle Tube A
1
31
Plastic Bushing
1
32
Handlebar
1
33
Foam Grip
2
34
Round Plug
2
35
Knob
1
36
Washer
4
37
Screw
M8 x 24.5
4
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s) needed:
✓The model number (found on cover of manual)
✓The product name (found on cover of manual)
✓The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the front
of the manual)
Please contact us at [e-mail] or 1-877- 90SUNNY (877-907-8669).

5
ASSEMBLY INSTRUCTIONS
STEP 1:
Put the 2 Plastic End Pieces
(No. 13) onto the rear tubes on
the Main Frame (No. 1). Make
sure the ball pins pop into the
holes on the bottom of the rear
tubes.
(1)
(2)
STEP 2:
(1) Insert the meter wire into the
hole at the top of the Handlebar
(No. 32).
(2) Thread the meter wire
through the Handlebar (No. 32)
post. Insert the Meter (No. 9)
onto the Handlebar (No. 32).
(3) Pull the Knob (No. 35) and
lower the Handlebar (No. 32)
post and the meter wire into
Handlebar Tube A (No. 30).
(4) Set at desired height.
Release the Knob (No. 35) and
make sure the pin pops into one
of the holes on the Handlebar
(No. 32) post.
(3)
(4)

6
1 PCS
#37 M8 x 24.5 4 PCS
#36 4 PCS
# 27 1 PCS
STEP 3:
(1) Pull the Cover (No. 27) up.
(2) Connect the meter wire to
the Wire A (No. 29) in the Main
Frame (No. 1).
(3) Lower the Handlebar Tube
(No. 30) into the Main Frame
(No. 1).
(4) Secure with 4 Washers (No.
36) and 4 Screws (No. 37).
(5) Rotate the Cover (No. 27)
and lower it, so the bottomof the
Cover (No. 27) inserts into the
slot on the Front Base Support
(No. 7).
The assembly is complete!

7
BATTERY:
Prior to first use of the product you have to install the battery. If the display is not working
properly, change the battery.
To change the battery, remove the meter from the handlebar. The battery compartment is
located at the back of the meter. After you change the battery, put the meter back on the
handlebar. Dispose of old battery according to your State and Regional guidelines.
METER INSTRUCTIONS
MODE Press to select each function.
RESET Press and hold for 3 seconds to reset all values.
SCAN Automatically displays each function in sequence for a few seconds each.
TIME Counts from 00:00 up to 99:59 in one-second increments.
CALORIES Accumulates the calorie consumption during your exercise. This is a rough
guide and should only be used as a comparison figure over several exercise
sessions.
COUNT Accumulates the numbers of strides during a work-out session.
Meter counts 1 stride after you step once with each foot.
STRIDES/MIN Displays strides per minute.
1. To turn on the meter, press any button or start exercise.
2. After 4 minutes of inactivity, the meter will shut off automatically.
Version 1.2