SUNRAY VU+ SOLO and SUNRAY VU+ SOLO2 Remote control User Manual
Battery
charge
indicator indicatesthe status of
th
e
battery voltage.
Standby-Button The
Standby-Button
switchesyour SunRay VU+solo2 on and off.
VU+-Mode-Button The
VU+-Mode-Button
switches
your remote control into SunRay VU+solo2con-
trol mode.
It
will shortly ligh
t
up
once
your
press
the
button.
HELP-Button
Pressing
th
e
HELP-Button
shows
the help menu.
TV-Mode-Button The TV-Mode-Button
switches
your
remote
con
tr
ol
into TV control
mode
to control
y
our
preprogrammed
TV.
It
will shortly ligh
t
up
once
your
press
the button.
Numeric-Keypad
Enter a
service
number to directly
access
the option by using the Numeric
Keypad
.
The
service numbers are
on the left
side
of the
service
list. The Numeric Keypad
can also be used
to
enter the teletext
page
number whenyou arein TV-Control-Mode and if your TV is teletext capable.
The TV station
has
to submit teletext information;
otherwise
this featurecannot
be
used.
Arrow-Left- and Arrow-Right-Button The
Arrow-Left
and
Arrow-Right-Button
enable
you to jump
back and forth
between
the last 20
channels
you
have
watched. If you
have selected
a
sub service.
you
can
use these
buttons to switch to the next sub service. Additionally
these
buttons can
be used
to
delete characters
during text
input.
Options-Buttons
All
possible
options are shown by the four colored dots/blocks (red, green,
y
ello
w,
blue) and can
be
activated by the Options-Buttons.
Depending
on the menu you currently are
in
the options will
change
and will
be named
differen
tly
.
INFO-Button If no OSD menu
i
s
visible on the
screen
and you are in TV or RADIO-Mode,
pressing
the
INFO-Button
will
reveal
the EPG information of the
chose channel
if
it
is available.
MENU-Button If you
are
in TV- or RADIO-Mode,
pressing
this button will bring up the OSDmain menu.
The OSD main menu
has
the following options:
You can switch to the
needed
option by
pressing
the
Navigation-Buttons
(
.T
)
.
If you are in the
service
list,
pressing
the
MENU-Button
brings up the
service
menu. The
shown
options may
v
ary
depending
on the
service
list you selected.
Navigation-Buttons
In
general
the
menus
are controlled using the
Navigation-Buttons
on your remote
control. To
ge
t
into a
submenu
you
have
to
press
the
OK-Button
.
OK-Button By
pressing
the
OK-Button
you confirm a
selection
in the menuor
service
list navigation.
If
no OSD menuis
presen
t
on your
screen,
the infobar is
shown once
you
press
the
OK-Button
.
AUDIO-Button
Pressing
th
e
AUDIO-Button
gives
an overviewof the
pro
vi
d
e
d
audio tracks.
PVR-Button
Pressing
the
VIDEO-Button
shows
the list of recordings.
Volume
+/-
Buttons The
Volume
+/-
Buttons control the volume of the audio.
Pressing
+
will
mak
e
turn
it
up and
pressing
- will turn
it
down.
EXIT-Button You can
leave
all
menus
and
service
lists by
pressing
the
EXIT-Button.
