Sunrich Tech U-1700 User manual

USB 3.1 Gen2 A+C 4-Port Hub
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
respective owners.

MN3000100028 Page 2
Contents:
Chapter 1: Introduction..........................................................3
1.1 Product Introduction....................................................3
1.2 Features........................................................................3
1.3 System Requirements..................................................4
1.4 Package Contents.........................................................4
1.5 Hardware Description..................................................5
Chapter 2: Getting Started.....................................................6
2.1 Hardware Installation ..................................................6

MN3000100028 Page 3
Chapter 1: Introduction
1.1 Product Introduction
The USB 3.1 Gen2 A+C 4-Port Hub features four USB 3.1 ports for
use with a computer, extending functionality for connecting other
devices.
1.2 Features
⚫Expand the connectivity of your computer using the
latest USB 3.1 Gen 2 technology
⚫Plug the USB 3.1 Type-C Pocket Hub into an available
USB Type-C port on your computer
⚫Provides three Type-A and one Type-C downstream
ports
⚫Supports BC1.2 and Apple charging
⚫Compliant with USB 3.1 Gen2 and data rate up to 10
Gbps
⚫Backward compatible with USB3.1 Gen1 (USB3.0),
USB2.0 and USB1.1 devices

MN3000100028 Page 4
⚫Hot-swapping feature allows you to connect/disconnect
devices without powering down the system
⚫LED to indicate Hub power
1.3 System Requirements
⚫Windows® 7/8/8.1/10 (32/64 bit)
⚫Mac OS X v10.8 or later
⚫Linux 2.6.24 and 4.11.x or later
1.4 Package Contents
⚫1 x USB 3.1 Gen2 A+C 4-Port Hub
⚫1 x User Manual
Note: Contents may vary depending on country/market.

MN3000100028 Page 5
1.5 Hardware Description
Figure 1. Front
•Power LED: The light will be on when the USB 3.1 Gen2 A+C
4-Port Hub is powered up.

MN3000100028 Page 6
Chapter 2: Getting Started
2.1 Hardware Installation
1. Plug the power adapter into the power jack of the USB 3.1 Gen2
A+C 4-Port Hub. (If power adapter is available)
2. Plug the USB 3.1 Gen2 A+C 4-Port Hub into an available USB
Type-C port on your computer.
3. Upon powering up your computer, the USB 3.1 Gen2 A+C 4-Port
Hub will be recognized by the computer’s operating system.
4. Once complete, you are ready to plug all peripheral devices into
your new USB 3.1 Gen2 A+C 4-Port Hub.